Luxul AGS-1008M Manuel utilisateur

Simply Connected

Quick Install Guide

AGS-1008M

8-Port Gigabit Switch

Use the AGS-1008M to:

 Expand Your Home or Ofﬁ ce Network with

8 Gigabit Ports

Deliver Ethernet Functionality in Remote or

Hard-to-Reach Locations

Future Proof Your Network with Gigabit

Speeds (10X Performance of Fast Ethernet)

Set-up a Dedicated Network for Optimizing

VoIP, Video, Security, or Gaming Applications.

AGS-1008M Quick Install Guide

a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685

luxul.com | 801-822-5450

Quick Install Guide

Model Number: AGS-1008M

8-Port Gigabit Switch

No part of this publication may be modiﬁed or adapted in any way, for any

purposes without permission in writing from Luxul. The material in this manual

is subject to change without notice. Luxul reserves the right to make changes to

any product to improve reliability, function, or design. No license is granted, either

expressly or by implication or otherwise under any Luxul intellectual property rights.

An implied license only exists for equipment, circuits and subsystems contained in

this or any Luxul product.

DOCUMENT CONVENTIONS

The following graphical alerts are used in this document to indicate notable situations:

NOTE: Tips, hints, or special requirements that you should take note of.

CAUTION: Care is required. Disregarding a caution can result in data

loss or equipment malfunction.

WARNING!: Indicates a condition or procedure that could result in

personal injury or equipment damage.

FCC COMPLIANCE

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may

cause undesired operation.

CONTACT LUXUL

Sales

P: 801-822-5450

E: [email protected]

Technical Support

P: 801-822-5450

E: suppor[email protected]om

Simply Connected

Other trademarks and registered trademarks are the property of their respective owners

PACKAGE CONTENTS

Please check the contents carefully after you open the packing:

One: 8-Port Gigabit Switch

One: Power Adapter

Four: Magnetic Mounting Kit

Four: Rubber Feet For Desktop Use

One: Quick Install Guide

If any of the listed items are missing or damaged, please contact the reseller from

whom you purchased the AGS-1008M for return/replacement.

HARDWARE DESCRIPTION

Front Panel and

The front panel of the AGS-1008M includes 8 Link/Activity LED’s and one power

LED. Please refer to the detailed description of these indicators in Section 1.4

below.

AGS-1008M Front Panel View

AGS-1008M Quick Install Guide

a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685

luxul.com | 801-822-5450

LED Indicators

The LED indicators of the AGS-1008M include 1 Power indicator and 8 Link/Activity

indicators. These LED indicators show the operating status of the AGS-1008M and

each switch connection.

The following chart shows the LED indicators of the AGS-1008M along with an

explanation of the indicator’s properties:

LED Color Status Description

Power Green ON This indicator lights up when the AGS-1008M is

powered

— OFF If this indicator is not lit, please check the DC power

supply to ensure proper connection to the outlet and

the AGS-1008M.

Link/

Activity

Green ON Indicates the AGS-1008M is connected at 1000Mbps.

Blinking Indicates the AGS-1008M is transmitting/receiving

data packets at 1000Mbps.

Orange ON Indicates the AGS-1008M is connected at 10/100Mbps.

Blinking Indicates the AGS-1008M is transmitting/receiving

data packets at 10/100Mbps.

— OFF Indicates the port is not connected to a device.

Rear Panel Layout

The Rear Panel of the AGS-1008M includes 8 10/100/1000Mbps RJ-45 Ethernet

ports and one DC power port used for DC power input.

AGS-1008M Rear Panel View

CAUTION: Please use the included power supply. If a different power

supply is used, it could damage the AGS-1008M

Simply Connected

Other trademarks and registered trademarks are the property of their respective owners

PREPARING FOR INSTALLATION

System Requirements

Ethernet Cables to connect the AGS-1008M to Ethernet enabled devices

 Power should be 9V---1A.

Installation Requirements

Install the AGS-1008M in a stable/safe place to avoid any possible damage

Inspect the AC power cord to ensure that it is correctly connected and

undamaged.

To avoid electric shock, DO NOT open the AGS-1008M housing (no user service-

able parts inside). Opening the AGS-1008M will void your warranty.

It is recommended that the AGS-1008M is positioned away from direct sun light

Ensure there is sufﬁcient space around the AGS-1008M for proper ventilation and

heat dissipation. It is recommended to have at least 4-6 inches around all sides.

Before Connecting to the Network

Before connecting the AGS-1008M to the network, please check the following:

 Determine placement location. Do not place any heavy articles on the

AGS-1008M.

 Ensure there is adequate space for proper heat dissipation and ventilation around

the AGS-1008M.

 Power socket should be within 4 feet of the AGS-1008M.

 Check power adapter to conﬁrm safe and secure connection.

WARNING!: Placing the magnetic Feet on DVR, Hard Drive or any other

electronic device may cause damage.

Installing the Magnetic feet

Installing the Magnetic feet to the AGS-1008M

AGS-1008M Quick Install Guide

a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685

luxul.com | 801-822-5450

Desktop Setup

For use as a desktop device, position and apply the included rubber feet to the

bottom of the AGS-1008M

Installing the Rubber feet to the AGS-1008M

AGS-1008M INSTALLATION

Connecting Devices

Use standard Ethernet CAT5, CAT5e or CAT6 cable to connect the AGS-1008M to

a device as described below (CAT6 must be used in order to achieve full Gigabit

bandwidth). The AGS-1008M will automatically adjust to the characteristics

(speed/duplex) of the device to which it is connected.

Connecting the AGS-1008M to a Device

When a device is properly connected, the Link/Activity LEDs for each port lights

up green/orange. Please refer to the LED Indicators section for deﬁ nitions and

troubleshooting.

Powering Devices

When you want the device powered by PoE connect the AGS-1008M to another

switch through the PoE In port. When you want the AGS-1008M to be powered by

AC, plug the AC power adapter into a wall outlet and into the Port on the Device.

Simply Connected

Other trademarks and registered trademarks are the property of their respective owners

PoE Powered

AC Powered

Connecting to a Router or Other Switch

XBR-2300

Enterprise Dual-WAN Router

POWER

100M

RESET

SYS

1 2 1 2 3

LANWAN

LAN

WAN

12123

Internet

Connecting the AGS-1008M to a Router or Switch

When a device is properly connected, the Link/Activity LEDs for each port light

up green/orange. Please refer to the LED Indicators section for deﬁ nitions and

troubleshooting.

LUX-QIG-AGS-1008M

029151017 v1

a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685

p: 801-822-5450 | f: 801-822-5460

Information on this document supersedes all previous versions.

Products and documents subject to change without notice.

Products may be discontinued without notice.

FCC Statement:

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which

case the user will be required to correct the interference at his own expense.

FCC Caution: Any changes or modiﬁcations not expressly approved by the party responsible for

compliance could void the user’s authority to operate this equipment.

This device complies with part 15 of the FCC Rules.

Hereby, Luxul, 14203 Minuteman Drive, Suite 201, Draper, Utah, 84020, declares that

this Luxul AGS-1008M is in compliance with the essential requirements and other

relevant provisions of Directive 1999/5/EC.

For a copy of this report send a self addressed stamped envelope to:

Luxul CE, 14203 Minuteman Drive, Suite 201, Draper, Utah, 84020.

Industry Canada

CAN ICES-3(B)/NMB-3(B)

Table des matières

Autres manuels Luxul Changer

Luxul

Luxul Xen XGS-1008 Manuel utilisateur

Luxul

Luxul Xen XGS-1008 Manuel utilisateur

Luxul

Luxul XMS-1008P Manuel utilisateur

Luxul

Luxul AGS-1024 Manuel utilisateur

Luxul

Luxul XMS-2624P Manuel utilisateur

Luxul

Luxul AMS-1208P Manuel utilisateur

Luxul

Luxul XMS-1008P Manuel utilisateur

Luxul

Luxul XGS-1024 Manuel utilisateur

Luxul

Luxul XGS-1024 Manuel utilisateur

Luxul

Luxul XMS-1024P Manuel utilisateur

Luxul

Luxul XMS-5248P Manuel utilisateur

Luxul

Luxul AMS-1208P Manuel utilisateur

Luxul

Luxul XMS-1010P Manuel utilisateur

Luxul

Luxul XMS-2624P Manuel utilisateur

Luxul

Luxul AMS-1208P Manuel utilisateur

Luxul

Luxul AGS-1008M Manuel utilisateur

Luxul

Luxul XFS-1816P Manuel utilisateur

Luxul

Luxul AMS-2600 Manuel utilisateur

Luxul

Luxul XFS-1816P Manuel utilisateur

Luxul

Luxul AMS-1208P Manuel utilisateur

Luxul

Luxul AMS-1816P Manuel utilisateur

Luxul

Luxul XFS-1084P Manuel utilisateur

Luxul

Luxul AMS-4424P Manuel utilisateur

Luxul

Luxul XMS-1208P Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur