Luvion Platinum Manuel utilisateur

PORTABLE DIGITAL

WIRELESS MONITORING SYSTEM

INSTRUCTION MANUAL

MODEL: Luvion Platinum

Features

• Digital wireless technology provides excellent image quality and clarity

• Interference free, secure and private signal

• Up to 450ft wireless transmission range ①

• Listen in with exceptional sound clarity

• Safety warning feature notifies you when out of range

• System expandable up to 4 cameras ②

①Maximum open space transmission range. The actual range is dependent upon building

materials and other obstructions in path of wireless signal.

②Additional cameras sold separately.

Camera Features

• VGA resolution camera

• Night vision allows for low light viewing up to 15 feet / 4.5 meters ③

• Built-in microphone

• Camera can be battery operated for true portable wireless operation

③IR illumination range of 15ft./4.5m under ideal conditions. Objects at or beyond this range

may be partially or completely obscured, depending on the camera application.

Receiver Features

• 2.4” color LCD monitor/receiver with superior image quality

• Video/Audio output for viewing on TV/Monitor or recording on VCR/DVD recorder

• Rechargeable lithium polymer battery for true portability

• Convenient receiver cradle included

• Audio level indicator and alarm

Getting Started

The system comes with the following components:

Check your package to confirm that you have received the complete system, including all components

shown above.

Wireless Receiver

Front/Back Controls

1. Power/Audio Level LEDs –

The green LED indicates the

receiver power is ON or OFF.

ystem

dark.

tton

The red LEDs indicate the audio

levels (low to high).

2. LCD Screen – Displays video

from the camera.

3. SCAN Button – When the

SCAN button is pressed, the LCD

screen is turned off and the s

continuously scans all available

cameras while the monitor is

The scan feature can be used for

the following two reasons: (1) to

prevent the user from being

disturbed (i.e. when sleeping) by

the bright LCD screen, or (2) to conserve battery power. If audio is detected above the preset audio

trigger level on the camera(s)*, the receiver will beep and display the triggered camera. The receiver will

return to scan mode about 5 seconds after the Alarm has completed. Press any button except OK bu

on the front panel of monitor will exit scan mode.

4. MENU Button – Press to access the receiver menu. Press the button again to exit.

5. Navigation Controls/OK Button – Use the controls in Viewing Mode and Menu Mode.

Viewing Mode: The following controls are used while watching live video from the camera:

• Press the UP/DOWN ▲▼ arrows to increase or decrease the volume.

• Press the LEFT ◄arrow to view cameras* in automatic switching mode.

• Press the RIGHT ►arrow to manually switch between cameras*.

Menu Mode: Use the UP/DOWN/LEFT/RIGHT ▲▼◄►arrows to navigate in Menu Mode. Press the

OK button to confirm the menu selection.

6. Stand – Flip the stand out to place the receiver on a flat surface (such as a table or countertop).

Alternatively, place the receiver in the receiver cradle.

7. Pair Button – Press the Pair button when pairing the receiver with a camera (see Page 9).

8. Speaker – Produces the sound transmitted from the cameras*.

* You must have more than one camera configured on the system when using the functions that requires

more than one camera.

Side Controls

9. Night Light Button – Press to remotely turn night light ON or OFF (for the camera currently being

displayed on the LCD screen).

connected (power cable as needs to be

10. Alarm +/- Button – Press to

increase or decrease the volume of t

audio alarm.

11. Receiver Antenna – receives &

sends signals from or to the cameras*.

12. Antenna Locking Switch – Slide

the switch to unlocking position, the

receiver antenna will pop up. Then you

can adjust the antenna to vertical

position for better signal reception.

13. Power Slide Switch – Slide the

switch to ON or OFF position to switch

on/off the receiver.

14. A/V Out Port (Optional Use) –

Connect the included A/V cable to view video from the receiver on a TV or monitor, or record to a DVD

recorder or VCR. Alternatively, use the A/V out port on the receiver cradle.

NOTE: Using this feature will turn off the LCD screen. The LCD screen will turn back on when the A/V

cable is disconnected.

15. DC 9V Power Input – Connect the included DC 9V power adaptor to power the receiver and/or

charge the receiver battery (when the receiver is not in the cradle).

Receiver Cradle Inputs

16. A/V Out Port – Connect the included A/V cable

to view the receiver picture (when docked) on a TV

or monitor, or record to a DVD recorder or VCR.

(NOTE: The A/V output function will not work if there

is no power cable connected to the cradle. Only one

A/V out port should be used at a time).

17. DC 9V Power Input – Connect the DC 9V power

adaptor (included) to the receiver cradle to power

the receiver and/or charge the receiver (when

docked).

NOTE: When the receiver is docked, and the A/V cable is

connected), the LCD screen on the receiver will be blacked out. The LCD screen will turn back on wh

the A/V cable is disconnected.

Wireless Receiver Installation

Determine if you will be using the receiver cradle, or connecting the cables directly to the receiver before

installation:

1. Place the receiver cradle or receiver in a place that will have clear reception with your camera(s).

2. Plug the AC adaptor power output cable into the 9V POWER input of the cradle or receiver. Plug the

power plug into a wall outlet or surge protector.

3. Leave the receiver to charge for 6 hours prior to first time use so the built-in rechargeable receiver

battery is fully charged. DO NOT remove the power cable from the receiver / from the cradle during initial

charge process. After initial charge, charge the receiver as required.

4. If you wish to view the receiver images on a larger screen, connect the included AV cable to the cradle

or receiver, and connect the other end of the cable to the Video IN (Yellow) and Audio IN (White) ports on

the TV, VCR or other viewing/recording device.

NOTE: the purpose of the AV output is for convenience only. When using with large screen TV/Monitor,

the picture might be grainy as the camera limits video resolution to VGA (640x480 pixels). This is not a

product defect. For best performance use with TV/Monitor PIP (Picture in Picture) function.

Check your TV/Monitor product manual to see if this feature is available on your TV/Monitor. This allows

you to view TV or other video source and see video from the camera in a small window on the same

screen.

Wireless Camera

Front & Back Controls

1. Camera Antenna – Sends & receives signals to or

from the receiver.

2. Night Light Switch – Press to turn the night light

ON or OFF. Alternatively, press the light button on the

receiver to remotely turn the camera light ON or OFF.

3. Lens/IR LED Cover – Infrared LEDs provide

viewing in no/low light conditions

4. Microphone – Receives sounds for the area near

the camera, and transmits sound from the camera to

the receiver.

ack

5. DC 9V Power – Connect the DC 9V power adaptor

to the camera

NOTE: The camera can also be powered using 4 AA

batteries (not included) installed in the base. If the

camera is plugged in with the AC adaptor, the

batteries will not be used. The batteries are intended

for short term, portable camera use.

6. Pair Button – The pair button is located on the b

of the camera behind the stand mount.

Side Controls

7. Sound Alarm Trigger – Adjust the trigger to set the

sound alarm sensitivity. The receiver will beep to alert the

user when the sound is above a preset sound level. Adjust

the side wheel to increase or decrease the level.

8. Camera ON/OFF Switch – Turns the camera ON or OFF.

Camera Installation

Before you install the camera, carefully plan where and how

it will be positioned, and where you will route the cable that

connects the camera to the power adaptor.

Before starting permanent installation, verify its performance by observing the image on the receiver

when camera is positioned in the same location/position where it will be permanently installed and the

receiver is placed in the location where it will be used most of the time.

Installation Warnings

Aim the camera(s) to best optimize the viewing area: Select a location for the camera that provides a

clear view of the area you want to monitor, which is free from dust, and is not in line-of-sight to a strong

light source or direct sunlight.

Avoid installing the cameras where there are thick walls, or obstructions between the Cameras and the

Receiver.

Night Vision

This camera has built-in IR LEDs, which provides the camera with the ability to view images in no/low

light conditions. It is important to use the provided power adaptor (and not the batteries) when using the

camera for prolonged periods in low light conditions, as the built-in IR LEDs will drain the battery more

quickly than regular daytime use.

Installing the Camera

1. Carefully unpack the camera.

NOTE: If you are installing cameras that did not come with the

system, please see the pairing camera section of this manual for

details on installation.

2. Mount the camera to the wall.

Mark the position of the screw holes on the wall, and drill holes

and insert 2 screws, then firmly attach the camera to the wall by

placing the stand over the installed screws and pushing the base

downwards.

NOTE: The camera can also be placed on a flat surface, such as a

Table or Shelf, and no mounting hardware is required.

3. Adjust the viewing angle of the camera

NOTE: You can install additional cameras (maximum of 4 cameras). When adding cameras that were

not included in the original box, you will need to pair up the cameras with the receiver. Refer to the

camera pairing section of this manual.

Connecting Camera Power

The camera can be powered either by using the provided power adaptor, or using batteries (requires 4

AA type batteries, not included).

NOTE: Wireless cameras require a power source (either an electrical outlet or battery power) to operate.

If you plan to permanently mount the camera in a location, it is recommended to use the included

camera power adaptor to prevent interruptions in the image, as using battery power is intended as a

temporary power solution.

Battery Pack

1. Remove the battery cover off the base of the camera.

teries (not included) into the Battery Pack.

e up the Positive (+) and negative

d in with the AC adaptor, the

batteries will not be used. The batteries are intended for

1. Signal Indicator – The signal indicator shows the strength of the signal being received from the

of bars in the signal indicator shows the strength of the signal – One or No Bars

Power Adaptor

Connect the power adaptor to the camera. Make sure the

power adaptor is placed into a grounded outlet or surge bar

to protect the camera from power fluctuations.

2. Insert 4 AA bat

Make sure to correctly lin

(-) terminals of the batteries.

3. Place the battery pack cover back on.

NOTE: If the camera is plugge

short term, portable camera use only.

Viewing Mode

camera. The number

indicates the signal is poor, and 4 bars indicate a very strong

signal.

Signal Indicators:

2. Channel Indicator – Displays the current channel number. Press the RIGHT ►arrow on the receiver

to switch between available cameras.

Note: To automatically switch between channels, press the LEFT arrow (AUTO).

Low Signal / No Signal Warnings

When the camera is positioned too far from the receiver, warning messages will be displayed.

Adjusting the Receiver Volume

The receiver volume can be adjusted by using the

UP/DOWN▲▼ arrows when viewing a camera.

Press the DOWN▼arrow to decrease the volume, and press

the UP▲arrow to increase the volume. When the volume is set

to one bar (lowest setting), the volume is muted.

The volume adjustment icon will be displayed during volume

changes, and will disappear after 10 seconds of inactivity.

Accessing Menu System

Press the MENU button on the receiver to enter MENU system. Use the navigating buttons to navigate

up/down/left/right in the menu, and press the OK button to confirm a setting.

Main Menu

The Main Menu contains 4 submenus:

1. PAIRING – Use the pairing menu to add camera(s) to the

receiver.

2. EV – Adjusts the exposure level of the camera.

3. POWER SAVING – Turns on the receiver power save mode

(when no activity on the cameras is detected).

4. SETTING – Sets the AV Out options, and resets the receiver

to factory defaults (erases all configurations).

Pairing Menu

The system comes with camera(s) that have already been

paired. The pairing function assigns each camera to a different

channel on the wireless receiver (up to 4 Cameras), and is

necessary for configuring additional cameras.

Use the UP▼and DOWN▲arrows to navigate. Select the

desired pairing channel, and press the OK button to begin the

pairing process with a camera.

NOTE: It is highly recommended to pair the cameras to the

receiver before permanently mounting the cameras. See the

pairing section of this manual for details.

EV Menu

The EV Menu is used to adjust the exposure of the camera.

Use the LEFT and RIGHT arrows to change the bar from

DARKEST (left) to LIGHTEST (right). Press the OK button to

accept the change.

Power Saving Menu

The Power Saving Menu is used to turn off the screen at a

predetermined time, to save battery. This function can be set to

1 minute, 2 minutes, 5 minutes, 10 minutes, or disabled by

selecting cancel.

The monitor will go to black screen to save battery after the time

you have set (1minute, 2 minutes, 5 minutes or 10 minutes).

It will be activated by pushing any button on the front panel of

monitor or by higher sound detected by cameras.

If it is activated by pushing any button (except OK button) on front panel of monitor, the monitor will go

back to black screen after the time you set if there is no sound trigger during that time.

If it is activated by higher sound (sound trigger), it will go back to black screen about 8 seconds after the

last trigger.

Setting Menu

The Setting Menu contains 2 submenus:

1. A/V Out – Changes the quality of the image sent to the A/V

receiving device (i.e. TV or Monitor).

2. Default – Resets all menu settings to factory default.

NOTE: Resetting the receiver will not reset all camera pairing.

A/V Out Menu

The A/V Out menu option is used to adjust the resolution quality

of the image sent to the viewing device (such as a TV, VCR or

Monitor). Use the UP and DOWN ▼▲ arrows to select a

resolution, and press OK to accept.

It is strongly recommended to use the “High” setting to ensure

the best image reproduction on large screens – the default

setting is “High”.

Setting Menu

OWN

The Setting option is used to reset the receiver to factory

defaults – all menu settings will be reset. Use the UP and D

▼▲ arrows to select YES, and press OK to accept.

NOTE: Camera pairing settings will NOT be affected by a reset.

Cameras will remain paired with the receiver.

Camera Pairing

The system comes with camera(s) that have already been paired. These cameras will communicate with

the receiver once powered on.

The pairing function assigns each camera to a different channel on the wireless receiver (up to 4

cameras), and is necessary for configuring additional cameras.

NOTE: It is highly recommended to pair the cameras to the receiver before permanently mounting the

cameras.

1. Power on the camera by connecting the power adaptor or battery pack, and turning the switch to ON.

The power LED for the camera should be ON.

2. Power on the receiver by connecting the power adaptor to the 9V Input on the side.

3. Press the MENU button on the receiver. Navigate to the Pairing

menu option by pressing the ▼▲ keys to navigate. Press the OK

button to open the Pairing menu.

4. Select a channel by pressing the UP and DOWN ▼▲ arrows.

Press the OK button on the receiver to accept.

Autres manuels pour Platinum

Table des matières

Autres manuels Luvion Instrument de mesure

Luvion

Luvion 75 PRO Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur