Lutron Electronics AM-4206M Manuel utilisateur

metal vane + air flow

ANEMOMETER

Model : AM-4206M

Your purchase of this ANEMOMETER marks a step forward for

you into the field of precision measurement. Although this

METER is a complex and delicate instrument, its durable structure

developed. Please read the following instructions carefully and

always keep this manual within easy reach.

OPERATION MANUAL

TABLE OF CONTENTS

1. FEATURES............................................................... 1

2. SPECIFICATIONS.....................................................

2-1 General Specifications........................................

2-2 Electrical Specifications.......................................3

A. Air velocity.......................................................3

B. Air flow............................................................3

C. Temperature....................................................3

3. FRONT PANEL DESCRIPTION....................................4

3-1 Display............................................................ 4

3-2 Power Off/On Button........................................4

3-3 Data Hold Button.............................................

3-4 / conversion Button..................................℃℉ 4

3-5 MAX/MIN/ Record Button...........................

3-6 Unit/ Conversion Button...............................

3-7 VEL./FLOW Selection Button............................. 4

3-8 Button.......................................................4

3-9 Button.......................................................4

3-10 FLOW MODE Selection Button..........................4

3-11 AVG. START Button......................................... 4

3-12 ENTER/RESET Button......................................

3-13 SAMPLE AREA Settin

Button...........................4

3-14 PROBE INPUT TERMINAL.................................4

3-15 RS232 Output Terminal...................................

3-16 Battery Compartment/Cover............................

4. MEASURING PROCEDURE.........................................5

4-1 Air Velocity Measurement...................................

4-2 Air Flow Measurement........................................6

5. RS232 COMPUTER INTERFACE.................................

6. BATTERY REPLACEMENT..........................................10

1. FEATURES

* Metal vane pobe, heavy duty, wide range measurement.

* Air flow : CMM ( m^3/min. ) and CFM ( ft^3/min. ).

Air velocity : m/s, ft/min, km/h, knots, mile/h.

Air temperature:

*3 air flow mode: instant, 2/3 V.max, Average.

* Low-friction ball vane wheels make sure high accuracy in

high & low velocities.

* Large LCD with dual display.

*Record maximum and minimum reading with recall.

* Data hold.

* Microcomputer circuit provides special function & offer

high accuracy.

* Auto shut off saves battery life.

* Thermistor sensor for Temp. measurement, fast response time.

* Build-in low battery indicator.

* Operates with 006P DC 9V battery.

* RS232 PC serial interface.

* Separate probe, easy for operation of different measurement

environment.

* Used the durable, long-lasting components, including a

strong, light weight ABS-plastic housing case.

*Wide applications: use this anemometer to check air

conditioning & heating systems, measure air velocities, wind

temperature...etc.

SPECIFICATIONS

2-1 General Specification

Circuit Exclusive one-chip of microcomputer

LSI circuit.

Display * 13 mm (0.5") Super large LCD

display.

* Dual functions display.

Measurement Air velocity:

m/s (meters per second)

km/h ( kilometers per hour ),

ft/min ( feet per minute ),

knots ( nautical miles per hour ),

mile/h ( miles per hour ),

Air flow:

CMM ( m^3/min. )

CFM ( ft^3/min. ).

Air temperature:

/℃℉

Data hold.

Sensor

Air velocity & Air flow

Structure Metal structure, Conventional

twisted van arm and low friction

ball bearing design.

Temperature :

Thermistor.

Memory Record maximum & minimum

Recall reading value with recall.

Power off Auto shut off saves battery life

or manual off by push button.

Sampling Approx. 1 sec.

Time

Operating Less than 80% RH.

Humidity

Operating

Meter

0 to 50 ( 32 to 122 )℃℃℉ ℉

Temperature

Probe

0 to 80 /32 to 176℃℃℉ ℉

Data Output RS 232 PC serial interface.

Power Supply Alkaline or heavy duty type DC 9V battery,

006P, MN1604 (PP3) or equivalent.

Power Current Approx. DC 8.3 mA.

Weight 381 g/0.84 LB, main instrument

Dimension Main instrument : 180 x 72 x 32 mm

Sensor head: Round, 72mm Dia.

Accessories Instruction manual.....................

1 PC.

Included Sensor probe.............................

1 PC.

Carryin

case............................. 1 PC.

Optional Data acquisition software........

SW-U801-WIN

Accessories USB cable..............................

USB-01

RS232 cable...........................UPCB-01

2-2 Electrical Specifications

A. Air velocity

Measurement Ran

e Resolution Accuracy

m/s 0.4 - 35.0 m/s 0.1 m/s ±(2%+0.2m/s)

0.01m/s,<10m/s

km/h 1.4 - 126.0 km/h 0.1 km/h ±(2%+0.8km/h)

mile/h 0.9 - 78.3 mph 0.1 mile/h ± (2%+0.4mile/h)

knots 0.8 - 68.0 knots 0.1 knots ±(2%+0.4knots)

ft/min 79 - 6890 ft/min 1 ft/min ± (2%+40 ft/min)

Remark : For prolon

ed life and safe operation, if

measurin

ran

e > 30 m/s please do not make th

operation over 5 minutes continuously.

B. Air flow

Measurement Ran

e Resolution Area

CMM ( m^3/min. ) 0-999,900 m^3/min. 0.001-100 0.001-9,999 m^2/min.

CFM ( ft^3/min. ).0-999,900 ft^3/min. 0.001-100 0.001-9,999 ft^2/min.

C. Air temperature

Measuring Range 0 to 80 /32 to 176℃℃℉ ℉

Resolution 0.1 /0.1℃℉

Accuracy 0.8 /1.5 ( < 60 )℃℉ ℃

3. FRONT PANEL DESCRIPTION

Fig. 1

3-1 Display 3-11 AVG.START Button

3-2 Power Off/On Button 3-12 ENTER/RESET Button

3-3 Data Hold Button 3-13 SAMPLE AREA Button

3-4 / conversion Button℃℉ 3-14 Probe Input Socket

3-5 MAX/MIN/. Record Button 3-15 RS232 Output Terminal

3-6 UNIT/ conversion Button 3-16 Battery/Compartment/

3-7 VEL./FLOW Button Cover

3-8 Button 3-17 Vane Probe Head

3-9 Button 3-18 Vane Probe Handle

3-10 FLOW MODE Button

MEASURING PROCEDURE

4-1 Air Velocity Measurement

1)Install the " Probe Plu

" into the " Probe Input Terminal "

( 3-14, Fi

. 1 ).

2)Power on the meter by pressin

the " Power OFF/ON

Button " ( 3-2, Fi

. 1 ).

3)Select VELOCITY measurin

mode by pressin

" VEL./FLOW Button " ( 3-7, Fi

. 1 ) to

et into velocity

measurin

mode.

4)Select the desired temperature units, by pressin

the " /℃℉

Conversion Button " ( 3-4, Fi

. 1 ).

5)Select the desired air velocity measurement units,

( mph, ft/min, knot, Km/h, m/s ) by pressin

the " Unit/

Button " ( 3-6, Fi

. 1 ).

It is ready to measure air velocity when you finish abov

settin

. Re

ardin

other functions relative to Velocity

Mode please refer to followin

description.

Data Hold Function:

Durin

the measurin

procedure, pressin

the " Data

Hold Button " ( 3-3, Fi

. 1 ) will hold the measured value

and the LCD will indicate " HOLD " symbol on the left.

Press the "Data Hold Button" a

ain to release th

data hold function.

Data Record( Max., Min.

)

* Press the " MAX/MIN/. Button " ( 3-5, Fi

. 1 ) once a

while to

et into Data Record mode. A "REC" symbol

appears on the LCD display. At the same time meter

records value received by probe.

* Press a

ain, " Max " symbol appears on the left down

corner of the LCD and the Maximum value durin

recordin

procedure will displayed on the LCD at the

same time.

*Press a

ain, " Min " symbol appears on the left down

corner of the LCD and the Minimum value during

recording procedure will displayed on the LCD at the

same time.

Press the MAX/MIN/. Button for around 3 seconds

to exit Data Record mode.

4-2 Air Flow Measurement

1)Install the "Probe Plu

" into the " Probe Input Terminal "

( 3-14, Fi

. 1 ).

2)Power ON the meter by pressin

the " Power OFF/ON

Button " ( 3-2, Fi

. 1 ).

3)Select FLOW measurin

mode by pressin

" VEL./FLOW

Button " ( 3-7, Fi

. 1 ) to

et into flow measurin

mode.

4)Select the desired air velocity measurement units,

( CMM or CFM ) by pressin

the " Unit/ Button "

( 3-6, Fig. 1 ).

Note :

Under Air Flow Mode, meter is without Temp. function.

5)Press " SAMPLE AREA Button " ( 3-13, Fi

. 1 ) to set

the measurin

area ( m 2 ft 2) The more accurate area　　

setting is the more accurate air flow value measured.

When you press the button you may see a " " symbol

appears and the fist di

it sparklin

. Now you can continue

the area settin

procedure.

6)Area settin

producre uses four buttons " ", "UNIT/ ",

" " and " MAX/MIN/. ". ( please refer to Fig. 1 page 4 )

Note :

" " button

Press one time to add one of the sparkled digit.

" UNIT/ " button

Press one time to decrease one from the sparkled digit.

* " " button

Press one time to select next digit.

* "MAX/MIN/. " button

Setting the decimal point.

After you set the number you need, please press

"ENTER/RESET" button to finish the settin

procedure.

For instance, if you want to set the sample area 120.3

square feet, please press " UNIT/ " button to make

sure " ft 2" appears on the display. Then press　

" SAMPLE AREA " button to get into the measuring area

setting procedure. Press " " button one time to set 1

and press " " button to select the next digit. Press " "

button two times to set 2 then press " " button and press

" MAX/MIN/. " button to set the decimal point. Press " "

button three times to set 3 and press "ENTER/RESET" button

to finish the sample area settin

procedure.

7)Under air flow measurin

, we provide 3 kinds of flow mode

for you to apply by pressin

the "FLOW MODE" button.

. 2/3V Max mode :

Selectin

this mode you can

et the 2/3 of the Max.

measured value. For instance Max. value is 300 CFM

but under 2/3V Max mode you can see 200 CFM only.

VG mode :

Under this mode you can avera

e maximum 20 records

by pressin

the " AVG.START " button manually. You

can see the avera

e number from the ri

ht-bottom o

LCD. The AVG formula listed as below:

1st Records +.........+ Nth Records

C.INSTANT mode :

LCD display shows measured number directly.

8)Under " 2/3V Max " and " AVG " mode, press

" ENTER/RESET " button to reset the previous settin

and restart measurin

ain.

Data Hold Function :

Durin

the measurin

procedure, pressin

the " Data

Hold Button " ( 3-3, Fi

. 1 ) will hold the measured value

and the LCD will indicate " HOLD " symbol on the left.

Press the "Data Hold Button" again to release the

data hold function.

)

Data Record( Max., Min. )

*Press the MAX/MIN/. Button to

et into Data Record

mode. A "REC" symbol appears on the LCD display. At

the same time meter records value received by probe.

*Press a

ain, " Max " symbol appears on the left down

corner of the LCD and the Maximum value durin

recordin

procedure will displayed on the LCD at the

same time.

Measuring Consideration:

he " " mark on the sensor head indicates the

mark need to face against the direction of air flow.

Table des matières

Autres manuels Lutron Electronics Instrument de mesure

Lutron Electronics

Lutron Electronics SP-82AC Manuel utilisateur

Lutron Electronics

Lutron Electronics DS-9200 Manuel utilisateur

Lutron Electronics

Lutron Electronics YK-37UVSD Manuel utilisateur

Lutron Electronics

Lutron Electronics PCD-431 Manuel utilisateur

Lutron Electronics

Lutron Electronics WA-2015 Manuel utilisateur

Lutron Electronics

Lutron Electronics PM-9112SD Manuel utilisateur

Lutron Electronics

Lutron Electronics EMF-831SD Manuel utilisateur

Lutron Electronics

Lutron Electronics HT-315 Manuel utilisateur

Lutron Electronics

Lutron Electronics PMS-713 Manuel utilisateur

Lutron Electronics

Lutron Electronics FR-5105 Manuel utilisateur

Lutron Electronics

Lutron Electronics SL-4033SD Manuel utilisateur

Lutron Electronics

Lutron Electronics FR-5120 Manuel utilisateur

Lutron Electronics

Lutron Electronics SL-4011 Manuel d'installation

Lutron Electronics

Lutron Electronics YK-2001PHA Manuel utilisateur

Lutron Electronics

Lutron Electronics EM-1910 Manuel utilisateur

Lutron Electronics

Lutron Electronics DT-2234BL Manuel utilisateur

Lutron Electronics

Lutron Electronics SL-4010 Manuel utilisateur

Lutron Electronics

Lutron Electronics VC-9200 Manuel utilisateur

Lutron Electronics

Lutron Electronics DW-6095 Manuel utilisateur

Lutron Electronics

Lutron Electronics DM-9027T Manuel utilisateur

Lutron Electronics

Lutron Electronics AM-4234SD Manuel utilisateur

Lutron Electronics

Lutron Electronics PMS-713 Manuel utilisateur

Lutron Electronics

Lutron Electronics vt-8204 Manuel utilisateur

Lutron Electronics

Lutron Electronics SL-4010 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur