Lucent Technologies Stinger Manuel utilisateur

Stinger®

ADSL Annex A Line Interface Module (LIM) Guide for LIMs with

ADSL2+ Capability

For software version 9.6.1

April 2004

Lucent Technologies

This material is protected by the copyright laws of the United States and other countries. It may not be reproduced, distributed, or altered in

any fashion by any entity (either internal or external to Lucent Technologies), except in accordance with applicable agreements, contracts, or

licensing, without the express written consent of Lucent Technologies. For permission to reproduce or distribute, please email your request to

techcomm@lucent.com.

Notice

Every effort was made to ensure that the information in this document was complete and accurate at the time of printing, but information is

subject to change. For latest information, refer to online product documentation at www.lucent.com/support.

European Community (EC) RTTE compliance

Hereby, Lucent Technologies, declares that the equipment documented in this publication is in compliance with the essential require-

ments and other relevant provisions of the Radio and Telecommunications Technical Equipment (RTTE) Directive 1999/5/EC.

To view the official Declaration of Conformity certificate for this equipment, according to EN 45014, access the Lucent INS online documentation

library at http://www.lucentdocs.com/ins.

Safety, compliance, and warranty Information

Before handling any Lucent Access Networks hardware product, read the Edge Access and Broadband Access Safety and Compliance Guide included

in your product package. See that guide also to determine how products comply with the electromagnetic interference (EMI) and network

compatibility requirements of your country. See the warranty card included in your product package for the limited warranty that Lucent

Technologies provides for its products.

Security statement

In rare instances, unauthorized individuals make connections to the telecommunications network through the use of access features.

Trademarks

Lucent, the Lucent logo, and all Lucent brand and product names are trademarks or registered trademarks of Lucent Technologies Inc. Other

brand and product names are trademarks of their respective holders.

Ordering Information

You can order the most up-to-date product information and computer-based training online at http://www.lucentdocs.com/bookstore.

Feedback

Lucent Technologies appreciates customer comments about this manual. Please send them to techcomm@lucent.com.

Customer Service

Stinger® ADSL Annex A LIM Guide for LIMs with ADSL2+ Capability iii

Customer Service

Product and service information, and software upgrades, are available 24 hours a day.

Technical assistance options accommodate varying levels of urgency.

Finding information and software

To obtain software upgrades, release notes, and addenda for this product, log in to

Lucent OnLine Customer Support at http://www.lucent.com/support.

Lucent OnLine Customer Support also provides technical information, product

information, and descriptions of available services. The center is open 24 hours a day,

seven days a week. Log in and select a service.

Obtaining technical assistance

Lucent OnLine Customer Support at http://www.lucent.com/support provides easy

access to technical support. You can obtain technical assistance through email or the

Internet, or by telephone. If you need assistance, make sure that you have the

following information available:

■Active service or maintenance contract number, entitlement ID, or site ID

■Product name, model, and serial number

■Software version or release number

■Software and hardware options

■If supplied by your carrier, service profile identifiers (SPIDs) associated with your

line

■Your local telephone company’s switch type and operating mode, such as AT&T

5ESS Custom or Northern Telecom National ISDN-1

■Whether you are routing or bridging with your Lucent product

■Type of computer you are using

■Description of the problem

Obtaining assistance through email or the Internet

If your services agreement allows, you can communicate directly with a technical

engineer through Email Technical Support or a Live Chat. Select one of these sites

when you log in to http://www.lucent.com/support.

Calling the technical assistance center (TAC)

If you cannot find an answer through the tools and information of Lucent OnLine

Customer Support or if you have a very urgent need, contact TAC. Access Lucent

OnLine Customer Support at http://www.lucent.com/support and click Contact Us

for a list of telephone numbers inside and outside the United States.

Alternatively, call 1-866-LUCENT8 (1-866-582-3688) from any location in North

America for a menu of Lucent services. Or call +1 510-747-2000 for an operator. If

you do not have an active services agreement or contract, you will be charged for

time and materials.

Stinger®ADSL Annex A LIM Guide for LIMs with ADSL2+ Capability v

Contents

Customer Service ........................................................................................................iii

About This Guide ................................................................................xi

What is in this guide ...................................................................................................xi

What you should know...............................................................................................xi

Documentation conventions .......................................................................................xi

Stinger documentation set .........................................................................................xii

Chapter 1 Overview ...........................................................................................1-1

Installing an ADSL LIM ........................................................................................... 1-1

Module specifications ............................................................................................... 1-2

Interpreting LIM status lights................................................................................... 1-3

Chapter 2 Configuration and Testing ...............................................................2-1

Configuring ATM ADSL-DMT interfaces ................................................................. 2-1

Overview of the al-dmt profile .......................................................................... 2-2

ADSL protocol support ...................................................................................... 2-2

Line activation and DMT parameters ................................................................ 2-3

The Al-Dmt profile ...................................................................................... 2-3

line-config subprofile .................................................................................. 2-3

Rate-adaptive mode parameters.................................................................. 2-7

Power-level parameters............................................................................... 2-8

Fast and interleaved bit-rate parameters ........................................................... 2-9

The fast-path-config subprofile ................................................................... 2-9

The interleave-path-config subprofile ......................................................... 2-9

margin-config subprofile ........................................................................... 2-11

Configuring call control.......................................................................................... 2-15

ADSL-DMT configuration examples for legacy ADSL............................................ 2-16

Examples for configuration of ADSL2+ line codes................................................. 2-18

Configuration for ADSL2................................................................................. 2-18

Configuration for ADSL2+............................................................................... 2-18

Checking status of ADSL-DMT interface................................................................ 2-19

Checking status of the physical interface......................................................... 2-20

Obtaining statistics about operations ............................................................... 2-22

Displaying ADSL-DMT port status and nailed groups ..................................... 2-23

Stinger®ADSL Annex A LIM Guide for LIMs with ADSL2+ Capability vii

Figures

Figure 1-1 Stinger ADSL LIM (72-port LIM shown).............................................. 1-4

Figure 2-1 Noise margin parameters and power adjustments relationship.......... 2-12

Figure 2-2 Future noise margins and dynamic rate adaptation relationship ....... 2-14

Figure 2-3 ADSL ATM LIM configuration............................................................ 2-17

Stinger®ADSL Annex A LIM Guide for LIMs with ADSL2+ Capability ix

Tables

Table 1-1 Additional features for LIMS with ADSL2+ capability ........................ 1-1

Table 1-2 ADSL LIMs with ADSL2+ capability.................................................... 1-2

Table 1-3 ADSL LIM status lights ........................................................................ 1-5

Table 2-1 Additional features for LIMS with ADSL2+ capability ........................ 2-2

Autres manuels pour Stinger

Table des matières

Autres manuels Lucent Technologies Matériel réseau

Lucent Technologies

Lucent Technologies Metropolis Manuel utilisateur

Lucent Technologies

Lucent Technologies Stinger MS+DSL Manuel utilisateur

Lucent Technologies

Lucent Technologies CellPipe 40H-CES Manuel utilisateur

Lucent Technologies

Lucent Technologies LambdaXtreme Fiche technique

Lucent Technologies

Lucent Technologies CellPipe SDSU Manuel utilisateur

Lucent Technologies

Lucent Technologies FT-2000 OC-48 Guide de dépannage

Lucent Technologies

Lucent Technologies CellPipe 55 Series Manuel utilisateur

Lucent Technologies

Lucent Technologies Stinger MRT-36H Manuel utilisateur

Lucent Technologies

Lucent Technologies Stinger FS+ Manuel utilisateur

Lucent Technologies

Lucent Technologies Stinger Manuel de l'opérateur

Lucent Technologies

Lucent Technologies Stinger MRT Manuel utilisateur

Lucent Technologies

Lucent Technologies WaveStar OLS 40G Manuel utilisateur

Lucent Technologies

Lucent Technologies Stinger Mode d’emploi

Lucent Technologies

Lucent Technologies cvMAX-100 Manuel utilisateur

Lucent Technologies

Lucent Technologies Stinger STGR-LIM-AP-48 Manuel utilisateur

Lucent Technologies

Lucent Technologies PacketStar PSAX 20 Manuel utilisateur

Lucent Technologies

Lucent Technologies Stinger Trunk Module OC-12/STM-4 Manuel utilisateur

Manuels Matériel réseau populaires d'autres marques

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuel utilisateur

Yudor

Yudor YDS-16 Manuel utilisateur

D-Link

D-Link ShareCenter DNS-320L Manuel utilisateur

Samsung

Samsung ES1642dc Instructions d'utilisation

Honeywell Home

Honeywell Home LTEM-PV Instructions de montage

evertz

evertz 7700 Series Manuel utilisateur

D-Link

D-Link ShareCenter DNS-343 Manuel utilisateur

Asante

Asante AsanteBridge 1012 Manuel utilisateur

FireBrick

FireBrick FB2700 Manuel utilisateur

Audiovox Electronics

Audiovox Electronics ARWH2T Manuel utilisateur

ADC

ADC DSX-1 Manuel

NetComm

NetComm NF2 Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 5620 Manuel utilisateur

Dell EMC

Dell EMC XC6420 Series Manuel utilisateur

Lanner

Lanner NCA-1020A Manuel utilisateur

Allied Telesis

Allied Telesis AT-TN121-A Manuel utilisateur

Arista

Arista CCA-ETM-Q12 Manuel utilisateur