Lucent Technologies PacketStar PSAX 20 Manuel utilisateur

Doc. No.: 255-700-019

COMCODE: 300303278

PacketStar™

PSAX 20 Access Concentrator

User Guide

Issue 1, October 2000

System So tware Release 6.3.0

For trademark, regulatory compliance, and related legal in ormation,

see the "Copyright and Legal Notices" section.

255-700-019 iii

PacketStar™PSAX 20 Access Concentrator User Guide, Issue1 Release6.3.0

This material is protected by the copyright laws o the United States and

other countries. It may not be reproduced, distributed, or altered in any

ashion by any entity (either internal or external to Lucent Technologies),

except in accordance with applicable agreements, contracts or licensing,

without the express written consent o the InterNetworking Systems, Access

Technology organization and the business management owner o the

material.

This document was prepared by the In ormation Design and Development

department o Lucent Technologies, InterNetworking Systems, Access

Technology group. O ices are located in Landover, Maryland, U.S.A.

Trademar s

AQueView, PacketStar, Lucent, Lucent Technologies, and the Lucent Technologies

logo are trademarks o Lucent Technologies. Other product and brand names

mentioned in this guide are trademarks or registered trademarks o their

respective owners.

Warranty Information

Software and Hardware Limited Warranties

Lucent Technologies provides a 90-day limited so tware warranty, and a one-

year limited hardware warranty on this product. Re er to the So tware License

and Limited Warranty Agreement and the Lucent Technologies InterNetworking

Systems Global Warranty that accompanied your package or more

in ormation.

Every e ort has been made to ensure that this document is complete and

accurate at the time o release, but in ormation is subject to change. Lucent

Technologies assumes no responsibility or liability or errors or inaccuracies

that may appear in this guide.

Warranty In ormation

iv 255-700-019

PacketStar™PSAX 20 Access Concentrator User Guide, Issue1 Release6.3.0

Warranty Warnings

!CAUTION:

Do not ma e electrical or mechanical modifications to any of the

components in the PSAX system. Lucent Technologies is not responsible

for the safety or the performance of a modified Lucent product. Do not

attempt to repair any failed Power Supply module, Stratum 3–4 module,

CPU module, I/O, or Server module.

!CAUTION:

Do not ma e electrical or mechanical modifications to any of the

components in the PSAX system. Lucent Technologies is not responsible

for the safety or the performance of a modified Lucent product. Do not

attempt to repair any failed removable I/O or server modules.

!CAUTION:

Modifying or tampering with PSAX chassis components may void your

warranty. Any modification to this equipment not expressly authorized

by Lucent Technologies may void your granted authority to operate such

equipment.

!CAUTION:

Air vents in the PSAX chassis are provided to aid in ventilation and to

protect from overheating. These vents must be regularly inspected by

the user and cleared of dust and bloc age. Equipment failure associated

with improper maintenance or suspected failure to adhere to proper

ventilation procedures as described above will void your warranty.

!CAUTION:

You must replace an air filter having an accumulation of dust to ensure

adequate airflow through the PSAX chassis. Reduced airflow could result

in damaging heat buildup within the chassis.

• Periodically inspect the air filter for accumulated dust and replace the

filter as needed. At a minimum, monthly inspection is recommended.

Equipment failure due to inadequate airflow voids your equipment

warranty.

• Use only filters supplied by Lucent Technologies in your PSAX chassis.

Use of other filters voids your equipment warranty.

!CAUTION:

You must maintain a minimum 5.08 cm (2 in.) of clearance around the

chassis for adequate airflow. Failure to adhere to this space requirement

may result in equipment failure due to overheating. Failure to provide a

minimum of 5.08 cm (2 in.) of clearance between this unit and any other

device/structure will void your warranty.

255-700-019 v

PacketStar™PSAX 20 Access Concentrator User Guide, Issue1 Release6.3.0

Regulatory Standards Compliance

!CAUTION:

If your system or location loses power or your current session ends

abnormally while you are in the process of configuring the system, and

you have not yet saved the values permanently, you will lose all unsaved

values you have applied on the various windows.

!CAUTION:

Shipping the chassis with removable modules installed may cause

damage to the chassis and the modules. Damage to any of the

components in the system resulting from shipping the chassis with

removable modules installed could void your warranty. Only Lucent-

authorized personnel should ship the PSAX 20 chassis with a module

installed.

Regulatory Standards Compliance

The PSAX 20 Access Concentrator is ully compliant with the ollowing

environmental, sa ety, and emissions standards. Appropriate statements

appear in the next subsection.

Safety Requirements

•Underwriter’s Laboratory (UL) — Sa ety and Factory Compliance

UL 1950

•CB-Scheme — IEC 60950:1991+A1:1992+A2:1993+A3:1995+A4:1996

Electromagnetic Compatibility (EMC) and Physical Requirements

•Federal Communications Commission (FCC) — EMC compliance

(Part 15 Class A)

•EN 55022:1994 Class A (CISPR22:1993)

Regulatory Statements

United States Federal Communications Commission (FCC) Statements

Part 15. This equipment has been tested and ound to comply with the

limits or a Class A digital device, pursuant to Part 15 o the FCC rules. These

limits are designed to provide reasonable protection against harm ul

inter erence when the equipment is operated in a commercial environment.

Regulatory Statements

vi 255-700-019

PacketStar™PSAX 20 Access Concentrator User Guide, Issue1 Release6.3.0

This equipment generates, uses, and can radiate radio requency energy, and,

i not installed and used in accordance with this guide, may cause harm ul

inter erence to radio communications. Operation o this equipment in a

residential area is likely to cause harm ul inter erence; in this case, you

would be required to correct the inter erence at your own expense.

All cables used to connect to peripherals must be shielded and grounded.

Operation with cables, connected to peripherals, that are not shielded and

grounded may result in inter erence to radio and television reception.

The user is cautioned that any changes or modi ications not expressly

approved by the party responsible or compliance could void the user’s

authority to operate the equipment.

Part 68. This equipment complies with Part 68 o the FCC rules. On the

back o the PSAX 20 chassis is a label that contains the FCC registration

number, in addition to other in ormation. You must provide this in ormation

to the telephone company, i they request it. The FCC requires Lucent

Technologies, Inc., to provide you with the ollowing in ormation:

1. The PSAX 20 system has digital service inter ace capabilities using RJ-

48C and RJ-48H connectors. The acility inter ace codes with which the

PSAX 20 system complies or digital services are as ollows: 04DU9-BN,

04DU9-DN, 04DU9-1KN, and 04DU9-1SN. The PSAX 20 system has

loop start inter ace capabilities using an RJ-11C connector. The acility

inter ace code with which the PSAX 20 system complies or service is

02LS2. The service order codes or the PSAX 20 system are 6.0F or the

T-1 inter ace and 9.0Y or the loop start inter ace.

2. An FCC-compliant telephone network inter ace jack is built into this

equipment and is compatible with interconnections that are Part 68

compliant.

3. The REN or the Voice 2-Wire O ice module when used in the PSAX 20

system is 0.7B.

4. I the PSAX 20 system causes harm to the telephone network, the

telephone company will noti y you in advance that temporary

discontinuance o service might be required. But i advance notice is not

practical, the telephone company will noti y you as soon as possible.

Also, you will be advised o your right to ile a complaint with the FCC i

you believe this is necessary.

5. The telephone company might make changes in its acilities, equipment,

operations, or procedures that could a ect the operation o this

equipment. I this happens, the telephone company will provide

advance notice or you to make necessary modi ications to maintain

uninterrupted service.

6. I you experience trouble with the PSAX 20 system, or need repairs or

warranty in ormation, please re er to the Limited Hardware Warranty

card that accompanied your PSAX 20 product shipment or instructions

on obtaining technical support in your area.

255-700-019 vii

PacketStar™PSAX 20 Access Concentrator User Guide, Issue1 Release6.3.0

Regulatory Statements

I the PSAX 20 system is causing harm to the telephone network, the

telephone company might request that you disconnect the equipment

until the problem is resolved.

7. This equipment has no user-serviceable parts.

This equipment cannot be used on public coin telephone service provided by

the telephone company. Connection to party line service is subject to state

tari s. Contact your state public utility commission, public service

commission, or corporation commission or in ormation.

Canadian Regulatory Statements

Industry Canada

Information

Ringer Equivalence Number (REN) Notice. The Industry Canada label

identi ies certi ied equipment. This certi ication means that the equipment

meets certain telecommunications network protective, operational, and

sa ety requirements. The Department does not guarantee that the equipment

will operate to the user’s satis action.

Be ore installing this equipment, the user should ensure that it is permissible

to be connected to the acilities o the local telecommunications company.

The equipment must also be installed by using an acceptable method o

connection. In some cases, the company’s inside wiring associated with a

single-line individual service may be extended by means o a certi ied

connector assembly (telephone extension cord). The customer should be

aware that compliance with the above condition may not prevent

degradation o service in some situations.

Repairs to some certi ied equipment should be made by an authorized

maintenance acility designated by the supplier. Any repairs or alternations

made by the user to this equipment or equipment mal unctions might give

the telecommunications company cause to request the user to disconnect the

equipment.

For their own protection, users should ensure that the ground connections o

the power utility, telephone lines, and internal metallic water pipe system are

connected together. This precaution may be particularly important in rural

areas.

!CAUTION:

Users should not attempt to ma e such connections themselves, but

should contact the appropriate electric inspection authority or

electrician.

The Ringer Equivalence Number (REN) assigned to the Voice 2-Wire O ice

module denotes the percentage o the total load to be connected to a

telephone loop, which is used by the device, to prevent overloading. The

termination on a loop may consist o any combination o devices subject only

to the requirement that the total o the REN o all devices does not exceed 5.

The REN or the Voice 2-Wire O ice module when used in the PSAX 20

system is 0.7B.

Regulatory Statements

viii 255-700-019

PacketStar™PSAX 20 Access Concentrator User Guide, Issue1 Release6.3.0

Renseignements

Industrie Canada

Avis de nombre équivalent de sonneries (REN). Le label Industrie

Canada permet de reconnaître les équipements homologués. Cette

homologation indique que l’équipement satis ait certaines règles de

protection, d’exploitation et de sécurité des réseaux de télécommunications.

Le ministère de l’Industrie ne garantit pas que l’équipement onctionnera à la

satis action de l’utilisateur.

Avant d’installer cet équipement, l’utilisateur doit s’assurer qu’il est permis

de le connecter aux installations de la compagnie de télécommunications

locale. L’équipement doit également être connecté suivant une méthode

convenable. Dans certains cas, il sera nécessaire de prolonger le câblage

intérieur de la ligne d’abonné de la compagnie au moyen d’un connecteur

homologué (rallonge de téléphone). L’abonné doit savoir que, dans certaines

situations, la con ormité aux dispositions ci-dessus ne prévient pas

nécessairement la dégradation du service.

La réparation de certains équipements homologués doit être assurée par un

atelier agréé désigné par le ournisseur. Toute réparation ou altération

e ectuée par l’utilisateur ou tout mauvais onctionnement de cet

équipement peut donner à la compagnie de téléphone des raisons de

demander audit utilisateur de déconnecter celui-ci.

Pour leur propre sécurité, les utilisateurs doivent veiller à ce que les mises à

la terre de l’alimentation secteur, des lignes téléphoniques et du système

intérieur de conduites d’eau métalliques soient raccordés ensemble. Cette

précaution peut s’avérer particulièrement importante dans les zones rurales.

!CAUTION:

Les utilisateurs ne doivent pas tenter d’effectuer eux-mêmes ces

raccordements, mais doivent prendre contact avec un électricien ou

organisme de vérification compétent.

Le nombre équivalent de sonnerie (REN) attribué au module central bi ilaire

(Voice 2-Wire O ice) correspond au pourcentage de la charge totale à

connecter à un circuit téléphonique bi ilaire; il est utilisé par l’appareil pour

prévenir la surcharge. Le circuit peut être terminé par n’importe quelle

combinaison d’appareils, à la seule condition que le total des REN de ces

derniers ne dépasse pas cinq.

255-700-019 ix

PacketStar™PSAX 20 Access Concentrator User Guide, Issue1 Release6.3.0

Safety Warnings and Information

When installing and operating the PSAX 20 Access Concentrator, ollow the

sa ety guidelines provided below to help prevent serious injury and/or

damage to the PSAX 20 equipment. Please read all warnings and instructions

supplied be ore beginning installation or con iguration o the PSAX 20

equipment. In addition to the general sa ety in ormation provided below,

you should also re er to the text in the user and installation guides or other

important sa ety in ormation and procedures.

DANGER:

Never push and/or place an object in or through any vent in the PSAX 20

chassis. Doing so may result in personal injury, equipment damage, or

both. Touching exposed electrical components may cause injury.

DANGER:

Install only equipment identified in the installation guide for the

PSAX 20 system. Using other equipment may result in improper

connection of circuitry, which may lead to equipment fire, personal

injury, or equipment damage.

DANGER:

Do not install or use the PSAX 20 unit in wet locations. In the event the

unit becomes wet, turn it off, disconnect it from the facility power

source, and allow the unit to dry thoroughly. If, after this procedure, you

encounter problems with the performance of the unit, please contact

your Networ Care Service Center. (See the Lucent Technologies

InterNetworking Systems Global Warranty that accompanied your

shipment for the appropriate telephone number.)

DANGER:

When removing an alternating current (AC) power cord from an PSAX 20

chassis running on AC power, remove the power cord from the connector

by grasping and pulling the plug, not the power cord.

DANGER:

Ensure that the voltage and frequency of the facility power source match

the requirements of the PSAX 20 Power Supply unit. The PSAX 20 system

should only be operated from the power source type indicated on the

mar ing label. Failure to meet this requirement may cause personal

injury, fire, and/or damage to the unit.

DANGER:

Shoc hazard! Do not personally perform any maintenance on this

equipment. This equipment does not contain any user serviceable parts.

Maintenance is to be performed only by qualified personnel.

Safety Warnings and Information

x 255-700-019

PacketStar™PSAX 20 Access Concentrator User Guide, Issue1 Release6.3.0

DANGER:

The OC-3c Single Mode (SM) and the STM-1 Single Mode (SM) modules

contain a laser-generating device, which emits a laser light beam from

the transmit port. This port is labeled TX on the module faceplate. When

the module is inserted into an operational PSAX 20 chassis, personal

injury may result from loo ing into, or near, either port. Personal injury

may also result from loo ing into, or near, the far end of a connected

fiber optic cable. For additional laser safety information, see Appendix B

of the OC-3c ulti- ode and Single- ode odule Guide, the OC-3c

ulti- ode and Single- ode 1+1 APS odule Guide, the ST -1 ulti-

ode and Single- ode odule Guide, and the ST -1 ulti- ode and

Single- ode 1+1 SP odule Guide.

DANGER:

Read all installation instructions before connecting the system to a

power source.

DANGER:

Do not wor on the system, connect, or disconnect cables during periods

of possible lightning activity.

DANGER:

Do not perform any action that could create a possible hazard to others

or ma e the wor ing environment and/or the equipment unsafe.

WARNING:

Be sure to cover all empty slots with blan faceplates to protect your

equipment.

WARNING:

This product relies on the building’s installation of short-circuit (over-

current) protection. Ensure that a fuse or circuit brea er no larger than

120 V ac, 15 A U.S. (240 V ac, 10 A international) is used on the phase

conductors (all current-carrying conductors).

WARNING:

Once the PSAX 20 chassis is operational (power is applied to the chassis)

and the OC-3c SM or STM-1 SM module is fully inserted into the chassis

bac plane, use extreme caution during removal of the fiber optic cable

from one or both ports. Keep the protective port caps supplied with

these two types of modules nearby (for example, taped to the cable for

the port), and place said cap on the port immediately after removing the

cable from an operational module.

WARNING:

If you place the PSAX 20 chassis on or near the floor, dust or debris may

accumulate faster inside the chassis than it would if placed on a table or

standing structure. Therefore, if this unit is placed on or near the floor,

accelerated routine vent and air filter inspection is necessary to avoid the

ris of unit failure and/or injury to property or persons.

Autres manuels pour PacketStar PSAX 20

Autres manuels Lucent Technologies Matériel réseau

Lucent Technologies

Lucent Technologies CellPipe SDSU Manuel utilisateur

Lucent Technologies

Lucent Technologies Stinger MRT-36H Manuel utilisateur

Lucent Technologies

Lucent Technologies Stinger Mode d’emploi

Lucent Technologies

Lucent Technologies WaveStar OLS 40G Manuel utilisateur

Lucent Technologies

Lucent Technologies Stinger FS+ Manuel utilisateur

Lucent Technologies

Lucent Technologies Stinger Manuel de l'opérateur

Lucent Technologies

Lucent Technologies Stinger STGR-LIM-AP-48 Manuel utilisateur

Lucent Technologies

Lucent Technologies Metropolis Manuel utilisateur

Lucent Technologies

Lucent Technologies Stinger Manuel utilisateur

Lucent Technologies

Lucent Technologies CellPipe 55 Series Manuel utilisateur

Lucent Technologies

Lucent Technologies cvMAX-100 Manuel utilisateur

Lucent Technologies

Lucent Technologies LambdaXtreme Fiche technique

Lucent Technologies

Lucent Technologies FT-2000 OC-48 Guide de dépannage

Lucent Technologies

Lucent Technologies Stinger Trunk Module OC-12/STM-4 Manuel utilisateur

Lucent Technologies

Lucent Technologies Stinger MS+DSL Manuel utilisateur

Lucent Technologies

Lucent Technologies CellPipe 40H-CES Manuel utilisateur

Lucent Technologies

Lucent Technologies Stinger MRT Manuel utilisateur

Manuels Matériel réseau populaires d'autres marques

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuel utilisateur

Yudor

Yudor YDS-16 Manuel utilisateur

D-Link

D-Link ShareCenter DNS-320L Manuel utilisateur

Samsung

Samsung ES1642dc Instructions d'utilisation

Honeywell Home

Honeywell Home LTEM-PV Instructions de montage

evertz

evertz 7700 Series Manuel utilisateur

D-Link

D-Link ShareCenter DNS-343 Manuel utilisateur

Asante

Asante AsanteBridge 1012 Manuel utilisateur

FireBrick

FireBrick FB2700 Manuel utilisateur

Audiovox Electronics

Audiovox Electronics ARWH2T Manuel utilisateur

ADC

ADC DSX-1 Manuel

NetComm

NetComm NF2 Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 5620 Manuel utilisateur

Dell EMC

Dell EMC XC6420 Series Manuel utilisateur

Lanner

Lanner NCA-1020A Manuel utilisateur

Allied Telesis

Allied Telesis AT-TN121-A Manuel utilisateur

Arista

Arista CCA-ETM-Q12 Manuel utilisateur