Logitech M705 Manuel utilisateur

Wireless device does not work or is not recognized

When your device isn't working, the problem is likely a connection or power issue. This can be

due to several reasons, such as:

Low battery levels

Plugging the receiver into a USB hub or other unsupported device such as a

KVM switch

NOTE: Your receiver must be plugged directly into your computer.

Using your wireless keyboard on metal surfaces

Radio frequency (RF) interference from other sources, such as wireless speakers, cell

phone, and so on

Windows USB port power settings

If your keyboard is not working or frequently loses connection try the following steps:

1. Check the batteries or make sure your device is charged.

2. Make sure the keyboard is On.

3. Keep other electrical wireless devices away from the USB receiver to avoid interferences.

4. Move the keyboard closer to the USB receiver.

5. Unpair/repair or disconnect/reconnect hardware:

oIf you have a Unifying receiver, identified by this logo, see Unpair a mouse

or keyboard from the Unifying receiver for instructions.

oIf your receiver is non-Unifying, it cannot be unpaired. However, if you have a

replacement receiver, you can use the Connection Utility software to perform the

pairing.

USB receiver does not work or is not recognized

If your device stops responding, confirm that the USB receiver is working properly.

The steps below will help to identify if the issue is related to the USB receiver:

1. Open Device Manager and make sure your product is listed.

2. If the receiver is plugged into a USB hub or extender, try plugging it into a port directly

on the computer

3. Windows only —try a different USB port. If it makes a difference, try updating the

motherboard USB chipset driver.

4. If the receiver is Unifying, identified by this logo, open Unifying Software and

check if the device is found there.

5. If not, follow the steps to connect the device to a Unifying receiver.

6. Try using the receiver on a different computer.

7. If it’s still not working on the second computer, check Device Manager to see if the

device is recognized.

If your product is still not recognized, the fault is most likely related to the USB receiver rather

than the keyboard or mouse.

6. Try a different USB port. If using a different USB port works, try updating the

motherboard USB chipset driver.

7. Windows only —check USB port power settings.

8. Upgrade the firmware for your device if available.

9. Try the device on a different computer.

Keyboard/Mice - Buttons or keys do not work correctly

Likely Cause(s):

Potential hardware issue

Operating system /software settings

USB port issue

Symptom(s):

Single-click results in double-click (mice and pointers)

Repeating or strange characters when typing on the keyboard

Button/key/control gets stuck or responds intermittently

Possible solutions:

1. Clean the button/key with compressed air.

2. Verify the product or receiver is connected directly to the computer and not to a hub,

extender, switch or something similar.

3. Unpair/repair or disconnect/reconnect hardware.

4. Upgrade firmware if available.

5. Windows only —try a different USB port. If it makes a difference, try updating the

motherboard USB chipset driver.

6. Try on a different computer. Windows only —if it works on a different computer, then

the issue might be related to a USB chipset driver.

*Pointing devices only:

If you’re not sure if the problem is a hardware or software issue, try switching the buttons

in the settings (left click becomes right click and right click becomes left click). If the

problem moves to the new button it is a software setting or application issue and

hardware troubleshooting cannot resolve it. If the problem stays with the same button it is

a hardware issue.

If a single-click always double-clicks, check the settings (Windows mouse settings and/or

in Logitech SetPoint/Options/G HUB/Control Center/Gaming Software) to verify if the

button is set to Single Click is Double Click.

NOTE: If buttons or keys respond incorrectly in a particular program, verify if the problem is

specific to the software by testing in other programs.

No optical light visible on the M705 mouse

Your mouse uses an infrared (IR) Laser light that is invisible to the human eye.

If you're not sure if your mouse is turned on, check the ON/OFF switch located on the bottom.

When your mouse is:

ON - The switch is pushed over to the right and you see green next to it.

OFF - The switch is pushed over to the left and you see red next to it.

Mouse isn't working

If your M705 mouse isn't working, the problem is likely a lost connection. The connection

between the mouse and the Unifying receiver can be lost for several reasons, such as:

Low battery levels

Moving the receiver from USB one port to another

Moving the receiver to another computer

Plugging the receiver into a USB hub or other unsupported device such as a KVM switch

(NOTE: Your Unifying receiver must be plugged directly into your computer.)

Using your wireless mouse on metal surfaces

Radio frequency (RF) interference from more powerful devices such as:

oWireless speakers

oComputer power supplies

oMonitors

oCell phones

oGarage door openers

Before reconnecting your mouse

1. Fix or rule out the potential problem sources listed above.

2. Make sure you have fresh batteries in your mouse (see answer 360023222174 for

instructions).

3. Make sure the mouse is turned on (see answer 360023222174 for instructions).

4. Plug the receiver directly and securely into a working USB port on your computer.

5. Turn your computer on.

Reconnecting your mouse

1. Download and install the latest software from the Marathon Mouse M705 Downloads

page.

2. Launch the Logitech Unifying Software:

Windows 7: Start > Programs > Logitech > Unifying > Logitech Unifying Software

Windows 8: Start screen > Logitech Unifying Software

Macintosh: Application > Utilities > Logitech Unifying Software

3. Click Next at the bottom of the Welcome screen.

4. Follow the on-screen instructions to turn your mouse off and then back on.

5. When your mouse is detected, you'll see the confirmation message below. Click Yes and

then Next. Otherwise, repeat from step #4.

6. Click Finish to exit the Logitech Unifying Software. Your mouse should now be

connected.

Mouse or keyboard frequently stops working

Keep other electrical devices at least 8 inches (20 cm) away from the Unifying receiver

Move the mouse or keyboard closer to the Unifying receiver

Move the receiver to a different USB port on your computer

Autres manuels pour M705

Table des matières

Autres manuels Logitech Souris

Logitech

Logitech M-RR67A Manuel utilisateur

Logitech

Logitech Cordless Optical TrackMan Manuel utilisateur

Logitech

Logitech Cordless Desktop Wave Pro Manuel utilisateur

Logitech

Logitech WIRELESS MOUSE M215 Manuel utilisateur

Logitech

Logitech WHEEL MOUSE Manuel utilisateur

Logitech

Logitech MX Master 3S Manuel utilisateur

Logitech

Logitech MX Anywhere 2S Manuel utilisateur

Logitech

Logitech MX1000 Manuel utilisateur

Logitech

Logitech M705 Manuel utilisateur

Logitech

Logitech MX ERGO Guide de démarrage rapide

Logitech

Logitech G903 Manuel utilisateur

Logitech

Logitech G100 Manuel utilisateur

Logitech

Logitech PRO X SUPERLIGHT Manuel utilisateur

Logitech

Logitech G9 Manuel utilisateur

Logitech

Logitech Ultrathin T630 Manuel utilisateur

Logitech

Logitech G903 Manuel utilisateur

Logitech

Logitech G5 Manuel utilisateur

Logitech

Logitech LX3 Manuel utilisateur

Logitech

Logitech T620 Manuel utilisateur

Logitech

Logitech 931222-0403 - Optical Mouse USB Manuel utilisateur

Logitech

Logitech Anywhere Mouse MX Manuel utilisateur

Logitech

Logitech M-R0050 Manuel utilisateur

Logitech

Logitech M-R0041 Guide de l'utilisateur

Logitech

Logitech M331 Manuel utilisateur

Manuels Souris populaires d'autres marques

Sven

Sven RX-G720 Manuel utilisateur

3DConnexion

3DConnexion CadMouse Pro Manuel utilisateur

Canyon

Canyon Puncher GM-20 Manuel utilisateur

Sharkoon

Sharkoon Light2 180 Manuel utilisateur

Cherry

Cherry MW 8C ERGO Manuel utilisateur

NGS

NGS HIT RB Manuel utilisateur

Sharkoon

Sharkoon FireGlider Manuel utilisateur

Lenovo

Lenovo Wireless Mouse N3902 Manuel utilisateur

BASETech

BASETech BN-S11 Manuel utilisateur

Dell

Dell WM326 Manuel utilisateur

Areson

Areson B213 Manuel utilisateur

HP M17587-371 Manuel utilisateur

Chatpen

Chatpen CHA-30 Manuel utilisateur

GAMDIAS

GAMDIAS DEMETER GMS5000 Manuel utilisateur

HP KJ453AA - Wireless Laser Mouse Manuel utilisateur

Trust

Trust GRAPHIN GXT 960 Manuel utilisateur

Lenovo

Lenovo SD-9082 Manuel utilisateur

Alienware

Alienware AW320M Manuel utilisateur