Logic Controls CR3003 Series Manuel utilisateur

USB Compact Cash Drawers

Compact, with Small Footprint

USER MANUAL

Model: CR3003 Series

NOTICE

The manufacturer of the POS pole display makes no representations or

warranties, either expressed or implied, by or with respect to anything in

this manual, and shall not be liable for any implied warranties of fitness

for a particular purpose or for any indirect, special or consequential

damages. Information in this document is subject to change without

notice and does not represent a commitment on the part of the

manufacturer.

FCC NOTICE

This equipment generates, uses, and can radiate radio frequency energy

and if not installed and used in accordance with this manual, may cause

interference to radio communications. It has been tested and found to

comply with the limits for a Class A digital device pursuant to Subpart J of

Part 15 of FCC Rules, which are designed to provide reasonable

protection against interference when operated in a commercial

environment. Operation of this equipment in a residential area is likely to

cause interference in which case the user at his own expense will be

required to take whatever measures may be required to correct the

interference.

LOGIC CONTROLS, INC.

355 Denton Avenue

New Hyde Park, NY 11040

TEL: (516) 248-0400

FAX: (516) 248-0443

Email: [email protected]

http://www.logiccontrols.com

iii

TABLE OF CONTENTS

FEATURES ...........................................................................1

CARTON CONTENTS ..........................................................2

INTERFACE DESCRIPTION ................................................2

INSTALLATION ....................................................................3

DRIVER INSTALLATION ......................................................3

SETTING UP DRAWER OPENING CODE ...........................4

KEY LOCK OPERATION ......................................................5

FUNCTIONAL TEST..............................................................5

SPECIFICATIONS ................................................................6

FEATURES

•Low cost

•Small foot-print with efficient use of internal space

•Drawer opens with programmable security codes (1 to 5 bytes)

received from computer

•Bills and coins compartments

•Three-position lock for maximum cash security

•High security - no screws on the outside of the case

•Check slot for non-cash or large-bill transaction

•Rugged design with reinforced heavy gauge steel construction

•Large ball bearings riding on special guides for remarkably smooth

drawer slide

•Contemporary style

•USB Interface, port powered, with virtual COM port driver

•Advanced electronics that extend the MTBF (Mean Time Between

Failure)

•Precision mechanical parts with tight tolerance to assure wobble-

free drawer movements

•Available in beige and dark gray

•Optional accessories – cash tray cover with lock and under

counter mounting bracket

CARTON CONTENTS

1. Cash drawer, pre-assembled

2. USB interface cable

3. Two keys

4. Installation guide

5. Floppy diskette containing USB driver and user manual

INTERFACE DESCRIPTION

Connect the drawer to the computer USB port. The drawer works with

USB interface and gets it’s power from the USB port.

Before working with the drawer, USB driver has to be installed. In

order to work with software that were written to work with COM ports

only, the driver is designed to present the USB drawer as a virtual

COM port device. That is, it works as if it is connected to a COM port.

Whenever the POS application software sends a pre-set open

command code to the virtual COM port, the drawer will be opened.

The open command code is set by the programming utility and it can

be 1 to 5 bytes long.

INSTALLATION

The CR3003 cash drawer has been pre-assembled to make the

installation as simple as possible.

1. Remove the cash drawer from its shipping container.

2. Remove the keys and interface cable from its plastic bag.

3. Connect the RJ11 connector of the interface cable to the cash

drawer back panel.

4. Connect the USB connector of the interface cable to the computer

USB port.

DRIVER INSTALLATION

When hardware is installed correctly, Windows will detect the USB

cash drawer and start device driver installation. The drawer will be

installed as “HID device” automatically. Follow the instructions below

to install the virtual COM port driver in order to use COM port names

to access the cash drawer:

1. Insert the driver diskette into floppy disk drive A.

2. With Windows Explorer, select floppy drive A and double click on

the file “HidComInst.exe” to install the ”HID to virtual COM port”

conversion driver.

3. Go to "Device Manager" to check that the cash drawer has been

installed correctly under "Ports (COM & LPT)" section and note

down the assigned COM port name. To invoke “Device

Manager”, place the cursor on “My Computer” and right click, then

left click on “Properties” on the pop up menu. Then click

“Hardware” and then “Device Manager”.

4. Set up the retail POS software configuration section to use the

installed COM port number for the cash drawer.

SETTING UP CASH DRAWER OPENING CODE

1. With Windows Explorer, double click on the file "CR3Edit" to start

the utility software.

2. Select COM port name on the utility start up screen as shown

under Device Manager and click OK.

3. Enter number of bytes to be used for the opening code in the

"Bytes in command" box (1 to 5).

4. Enter the decimal code values in the boxes “Cmd Code1” to “Cmd

Code5”. For example, enter '7' for "Ctrl-G" to open the drawer. If

the code is less than 5 bytes, codes in the additional boxes will be

ignored.

5. Click "Write Comm" button to write settings to the CR3003.

6. Set up the POS retail software with same opening code and COM

port name for the cash drawer.

7. Test with the POS retail software.

Note: For security reasons, it's recommended that the programming

utility software should not be copied onto the cashier station

computer to avoid unauthorized change of the opening codes.

KEY LOCK OPERATION

All cash drawers have a three position key lock for maximum security.

The fully counter clockwise lock position offers maximum security. The

cash drawer can not be opened by computer or an individual when

the lock is in the full counter clockwise position. With the lock in the

center position, the drawer will open when correct command code is

received from the computer. The cash drawer is manually opened

when the lock is in the full clockwise position.

Drawer securely locked. Cannot be opened by computer or

manually.

Opens the drawer with the supplied key.

Automatically opens the drawer by computer control.

FUNCTINOAL TEST

Function of the drawer can be tested with the application POS

software after USB driver is installed successfully and the opening

command codes are programmed. Turn the cash drawer key lock to

the vertical position and run the POS software to verify that the drawer

will open correctly.

To test the drawer without the POS software, HyperTerminal

communication software that comes with Windows may be used. Use

the programming utility to program the cash drawer to open with a

one-byte code “48” (ASCII code for ‘1’). Then open HyperTerminal to

connect to the virtual COM port number as indicated in Device

Manager. When the connection is established, press “1” on the

keyboard should open the drawer. After testing, set the opening code

to match with requirements of the POS software.

SPECIFICATIONS

MECHANICAL:

Weight 14.3 lb. (6.5 kg)

Height 3.3 in. (8.5 cm)

Width 15.7 in. (40 cm)

Depth 16.1 in. (41 cm)

ELECTRICAL:

USB Input: Standard USB Full speed interface

Power Supply: +5VDC, through USB port

Pulse charging time: 2 to 3 seconds

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Logic Controls Tiroir LCD

Logic Controls

Logic Controls CR3002 Manuel utilisateur

Logic Controls

Logic Controls CR3000 Series Manuel utilisateur

Logic Controls

Logic Controls CR1800 Series Manuel utilisateur

Logic Controls

Logic Controls CR1600 Series Manuel utilisateur

Logic Controls

Logic Controls CR3000 Series Manuel utilisateur

Logic Controls

Logic Controls CR3000 Series Manuel utilisateur

Logic Controls

Logic Controls CR1600 Manuel utilisateur

Logic Controls

Logic Controls CR1800 Manuel utilisateur

Manuels Tiroir LCD populaires d'autres marques

Acnodes

Acnodes KD 8228 Manuel utilisateur

Ameriwood

Ameriwood 9524328PCOM Manuel utilisateur

Kesseböhmer

Kesseböhmer TANDEM solo Manuel utilisateur

Crystal Image Technologies

Crystal Image Technologies RMD-151-A Series Manuel utilisateur

APW Wyott

APW Wyott Ease Extreme HDX-1-120 Manuel utilisateur

NTI

NTI RACKMUX-V17-N Manuel utilisateur

Austin Hughes

Austin Hughes CyberView L120 Manuel utilisateur

Uplift Desk

Uplift Desk STR018 Manuel utilisateur

Acnodes

Acnodes KDC 81932 Manuel utilisateur

Acnodes

Acnodes RK1200T Manuel utilisateur

StarTech.com

StarTech.com DuraView RACKCONS1501 Manuel utilisateur

Mocka

Mocka Mischa Manuel utilisateur

GRASS

GRASS DWD XP Manuel utilisateur

StarTech.com

StarTech.com DuraView RACKCONS1701 Manuel utilisateur

Fisher & Paykel

Fisher & Paykel IZONA CoolDrawer RB36S Manuel utilisateur

Synergy Global Technology

Synergy Global Technology LCD1U17-44 Manuel utilisateur

Fujitsu

Fujitsu RC25 Manuel utilisateur

Acnodes

Acnodes RK 1000B Manuel utilisateur