LIVARNO LUX 279345 Manuel utilisateur

CORDLESS

WORK LIGHT

IAN 279345

CORDLESS WORK LIGHT

Operation and Safety Notes

GB / IE / NI Operation and Safety Notes Page 5

AHG01386A-BS HG01386B-BS

11 12 13

5GB/IE/NI

Introduction...............................................................................................................................Page 6

Proper use........................................................................................................................................Page 6

Description of parts and features...................................................................................................Page 6

Technical data.................................................................................................................................Page 6

Scope of delivery............................................................................................................................Page 7

Safety instructions...............................................................................................................Page 7

Before use...................................................................................................................................Page 8

Charging the LED work lamp .........................................................................................................Page 8

Use....................................................................................................................................................Page 9

Using the LED work light without a power connection .................................................................Page 9

Corded use of the LED work lamp.................................................................................................Page 9

Fixing the device .............................................................................................................................Page 10

Mounting the charging station .......................................................................................................Page 10

Maintenance and cleaning...........................................................................................Page 10

Disposal........................................................................................................................................Page 10

Warranty.....................................................................................................................................Page 11

6 GB/IE/NI

Cordless work light

Introduction

We congratulate you on the purchase of your new product. You have chosen a high quality product.

The instructions for use are part of the product. They contain important information concerning safety,

use and disposal. Before using the product, please familiarise yourself with all of the safety information

and instructions for use. Only use the unit as described and for the speciﬁed applications. If you pass

the product on to anyone else, please ensure that you also pass on all the documentation with it.

Q Proper use

This product is only suitable for private use in dry indoor locations, e.g. in workshops or ga-

rages. The product and rechargeable batteries withstand extreme physical conditions of vi-

bration (1.0 m²/s³ 200 - 2000Hz).

The product is not intended for commercial use or for use in other applications.

Not suitable for ordinary lighting in household room illumination.

Description of parts and features

1Torch

2Inspection Light

3Charging indicator on LED work light

4ON / OFF switch

5Hook

6Magnet

7Female connector on work light

8Power indicator on charing station

9Female connector on charging station

10 Mains adapter

11 Mounting holes on charging station

12 Screws (ø approx. 4mm)

13 Dowels (ø approx. 6mm)

Technical data

Input: 5 V max. 1000 mA

HG01386A-BS: 1 x 3W COB for inspection light and 1 x 1W LED for torch;

HG01386B-BS: 3 x 1W LED for inspection light and 1 x 1W LED for torch

(LEDs not replaceable)

7GB/IE/NI

Lamp rechargeable

batteries: 1 x Lithium-ion 3.7 V , 4000 mAh (not replaceable)

Charging time: approx. 6-8 hours

Light on time: approx. 3.5 hours for the inspection light and 8 hours for the torch (when the

rechargeable batteries are fully charged)

Lifespan of LEDs: approx. 20,000 hours for the inspection light;

approx. 20,000 hours for the torch

Protection class: III /

Adapter:

Input: 100–240 V∼ 50 / 60 Hz

Output: 5 V 1A

Model: SD-B0501000D

Protection class: II /

System of protection: IP20

Polarity of the direct

current power supply:

Charging station:

Input: 5 V

Output: 5 V , 1000 mA

Model: TL1073-C

Polarity of the direct

current power supply:

Scope of delivery

1 Cordless work light

1 Mains adapter

1 Charging station

2 Screws (ø approx. 4mm)

2 Dowels (ø approx. 6mm)

1 Operating instructions

Safety instructions

DANGER TO LIFE AND RISK OF ACCIDENTS FOR INFANTS

AND CHILDREN! Never leave children alone and unsupervised with the packaging

material. There is always a risk of suﬀocation if children play with the packaging material.

Children often underestimate risks. Always keep children away from the packaging material. This

product is not a toy.

This appliance can be used by children aged from 8 years and above and persons with reduced

physical, sensory or mental capabilities or lack of experience and knowledge if they have been

given supervision or instruction concerning use of the appliance in a safe way and understand the

8 GB/IE/NI

hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall

not be made by children without supervision.

This product is not a toy and should be kept out of the reach of children. Children are not aware of

the dangers associated with handling electrical products.

Do not use the article if you detect any kind of damage.

CAUTION! DANGER OF EXPLOSION! Do not operate the LED work lamp in poten-

tially explosive environments in which there are inﬂammable vapours, gases or dusts.

Protect the appliance from moisture and damp. Never immerse the device in water or other liquids!

Connect the LED work lamp to a properly installed mains socket only. The voltages must comply with

information given in the section “Technical data”.

Ensure that the electrical socket is easily accessible so that you can pull the plug quickly out of the

socket if necessary.

Do not carry out any modiﬁcations or repairs to the product yourself. The LEDs cannot and must not

be replaced.

CAUTION! The protective surround to the LEDs cannot be replaced. Dispose of the LED work lamp

if you discover cracks or signs of fracture on the protective surround.

Dispose of the product if the LED work lamp, mains adapter or charging station is damaged.

Never connect the LED work lamp to a power supply socket if the LED work lamp, power lead or

socket is damaged or the LED work lamp has been dropped.

Ensure that the power lead cannot become damaged by sharp edges or hot objects. Unwind all the

lead completely before use.

Keep easily ﬂammable materials away the product. Never hang objects above the LED work lamp

or the mains adapter and never cover them.

Pull the mains adapter / plug out of the mains socket when you are not using the LED work lamp or

before you clean it. Do this as well if signs of a fault develop during use or charging, e.g. smoke,

burning smell etc., or during a storm. When doing this, pull directly on the mains adapter/ plug and

not on the lead.

Protect the product from extreme heat and cold.

The product is only suited for use with the included mains adapter (model no. SD-B0501000D).

Please note that the power adapter continues to draw a small amount of power even if the lamp is

turned oﬀ as long as the power adapter is plugged into a power outlet. To switch the device oﬀ

completely, unplug the power adapter from the socket.

The illuminant is not replaceable. If the illuminant fails at the end of its life, the entire light must be

replaced.

Before use

Charging the LED work lamp

Note: You can charge the LED work lamp from an ordinary domestic mains power outlet.

Note: To use the LED work lamp without an adapter, you must ﬁrst charge the integral rechargeable

batteries. It takes approx. 6 - 8 hours.

Note: Fully charge the LED work lamp before ﬁrst use.

Note: Charge the LED work lamp at least once a month, if it is to remain unused for an extended period

of time.

9GB/IE/NI

Note: If the LED work lamp has not been charged for an extended period of time (approx. 2 months),

you could ﬁnd that the integral rechargeable batteries have entered a dormant state. Charge and

discharge the LED work lamp a number of times in succession to reactivate the integral rechargeable

batteries.

Note: You can choose to charge the LED work lamp directly via the mains adapter or via the charging

station.

Before charging, switch the LED work lamp oﬀ (press ON / OFF switch 4).

To charge the LED work lamp via mains adapter 10 directly, plug the male connector of the mains

adapter into the female connector on the work light 7.

To charge the LED work lamp via the charging station, plug the male connector of the mains adapter

into the female connector on the charging station 9. Then place the LED work lamp into the charg-

ing station to charge the product (See Fig. B).

Note: The product is ﬁtted with an overcharge protection circuit. Despite this, you should disconnect

the LED inspection lamp from the power supply after the charging process is complete.

Note: During charging, the charge indicator LED lights up red. When charging is complete, the

charge indicator LED lights up green. When the charge indicator LED is green, pull the mains adapter

out of the socket. Disconnect the adapter from the LED work lamp to prevent the batteries from

discharging.

Use

CAUTION – RISK OF ACCIDENT! Always store and secure the LED work lamp in such a way

that there is no risk of injury from or damage to the product, even during full braking.

Note: The LED work light features magnets 6on the back. Ensure the metallic surface is suﬃciently

magnetisable to carry the weight of the light, before you use the magnets 6.

Using the LED work light without a power connection

Fully charge the LED work lamp as described in the section “Charging the LED work lamp“.

Press the ON/ OFF switch 4to turn the inspection light 2on.

Press the ON/ OFF switch 4again to turn the torch 1on.

Press the ON/ OFF switch 4the third time, the entire LED work light will be switched oﬀ.

Corded use of the LED work lamp

Use the included mains adapter for this purpose. Using the respective adapter, connect the inspec-

tion light to a suitable power supply.

Then proceed as described under „Using the LED inspection light without a power connection“

(starting with step 2).

NOTE: The LED work lamp can only be charged whilst oﬀ!

10 GB/IE/NI

Q Fixing the device

The LED work light can be used in 2 ways without having to hold it in your hand:

Hold the magnet 6against a metallic magnetic surface. The LED work light remains in this position.

Fold out the hook 5to suspend the LED work light from a suitable suspension point. The hook can

be turned through 360 degree.

Mounting the charging station (See Fig. C)

Note: You will need an electric drill.

CAUTION! RISK OF INJURY! Please read the operating instructions for your drill.

CAUTION! Ensure that you do not damage any electricity cables in the wall or ceiling.

Mark the two mounting holes at a distance of approx. 35 mm apart.

Now drill the holes on the wall (Ø approx. 6 mm; depth approx. 30 mm).

Insert the dowels 13 into the drilled holes. If necessary use a hammer to make this easier.

Screw up the screws 12 on the dowels.

Now hang the charging station to the screws via the mounting holes 11 .

Maintenance and cleaning

The product requires no maintenance. The LEDs cannot be replaced.

Switch oﬀ and disconnect the product from the power supply before you clean it.

Never immerse the product in water or other liquids.

Do not use corrosive cleaning agents.

Clean the product regularly with a dry, ﬂuﬀ-free cloth. Use a slightly moist cloth to remove any stub-

born dirt.

Disposal

The packaging is made entirely of recyclable materials, which you may dispose of at local

recycling facilities.

Contact your local refuse disposal authority for more details of how to dispose of your worn-out product.

To help protect the environment, please dispose of the product properly when it has reached

the end of its useful life and not in the household waste. Information on collection points and

their opening hours can be obtained from your local authority.

Defective or exhausted rechargeable batteries must be recycled in accordance with Directive 2006/ 66/EC

and its amendments. Return the battery and/ or the device through the appropriate collection facilities.

Table des matières

Autres manuels LIVARNO LUX Lampe de travail

LIVARNO LUX

LIVARNO LUX ST-LED-00740 Caractéristiques techniques

LIVARNO LUX

LIVARNO LUX 300635 Caractéristiques techniques

LIVARNO LUX

LIVARNO LUX 14140100L Caractéristiques techniques

LIVARNO LUX

LIVARNO LUX A32104 Manuel utilisateur

LIVARNO LUX

LIVARNO LUX 292043 Manuel utilisateur

LIVARNO LUX

LIVARNO LUX 94430 Manuel utilisateur

LIVARNO LUX

LIVARNO LUX VEILLEUSE LED Manuel utilisateur

LIVARNO LUX

LIVARNO LUX LLFL 27 A1 Manuel utilisateur

LIVARNO LUX

LIVARNO LUX HG00721A Manuel utilisateur

LIVARNO LUX

LIVARNO LUX 39584 Manuel utilisateur

LIVARNO LUX

LIVARNO LUX 14144702L Manuel utilisateur

LIVARNO LUX

LIVARNO LUX HG02985 Manuel utilisateur

LIVARNO LUX

LIVARNO LUX 275248 Manuel utilisateur

LIVARNO LUX

LIVARNO LUX 279378 Manuel utilisateur

LIVARNO LUX

LIVARNO LUX 15229S1LD Caractéristiques techniques

LIVARNO LUX

LIVARNO LUX LLFL 27 A1 Manuel utilisateur

LIVARNO LUX

LIVARNO LUX 292093 Manuel utilisateur

LIVARNO LUX

LIVARNO LUX 298829 Manuel utilisateur

LIVARNO LUX

LIVARNO LUX LED ROPE LIGHT Caractéristiques techniques

LIVARNO LUX

LIVARNO LUX 292060 Manuel utilisateur

LIVARNO LUX

LIVARNO LUX 283392 Manuel utilisateur

LIVARNO LUX

LIVARNO LUX Z31685B Manuel utilisateur

LIVARNO LUX

LIVARNO LUX 285386 Manuel utilisateur

LIVARNO LUX

LIVARNO LUX 14117008L Caractéristiques techniques

Manuels Lampe de travail populaires d'autres marques

ANSMANN

ANSMANN POWERLIGHT 5.1 Manuel utilisateur

RTRMAX

RTRMAX RTX1868 Manuel utilisateur

FeinTech

FeinTech LAL00220 Manuel utilisateur

Bunker Hill Security

Bunker Hill Security 64735 Manuel utilisateur

Goobay

Goobay 30450 Manuel utilisateur

REV Ritter

REV Ritter SPOT Manuel utilisateur

Ignition

Ignition Stagepix Line 100 IP Manuel utilisateur

SCANGRIP

SCANGRIP DUO CONNECT Manuel utilisateur

Bosch

Bosch GLI 18 V Manuel utilisateur

Bayco

Bayco SL-1514 Manuel utilisateur

EUFAB

EUFAB SMD LED 8+1 Manuel utilisateur

DeWalt

DeWalt DCL510 Manuel utilisateur

PowerSmith

PowerSmith PWLD080T Manuel utilisateur

MaxLite

MaxLite 73683 Manuel utilisateur

Heitronic

Heitronic Trend 27867 Manuel utilisateur

Monzana

Monzana Gore MZCL10 Manuel utilisateur

EINHELL

EINHELL TE-CL 18/2000 LiAC Manuel utilisateur

Bayco

Bayco NIGHTSTICK Dual-Light Xtreme Lumens... Manuel utilisateur