Lite-on Tech NR120 Manuel utilisateur

NR120

Intel® 845-G Motherboard

USER’S MANUAL

Intel® Pentium®4 Processor Motherboard

Rev. 1.0

NR120 Motherboard

Revision History

Revision Date Description

1.0 Initial release of NR120 motherboard user’s manual

Item Checklist

1 NR120 Motherboard

1 Floppy Cable

1 ATA Cable 66/100

1 I/O Shield

1 Heatsink Retention Module

1 CD for Motherboard Driver

NR120 User Manual

Quick Installation Guide

Intel® Pentium® 4 are registered trademark of Intel Corporation.

NR120 Motherboard

Safety Instructions

Please follow some precautions when operating your computer.

1. Always unplug the power cord when inserting any add-on card or module inside the system.

2. Use a grounded wrist strap before handling computer components. If one is not available, touch both of

your hands to a safely grounded object or to a metal object.

3. Place components on a level grounded antistatic pad or on the packaging that came with the components

whenever the components are separated from the system.

4. Keep equipment away from moisture and humidity.

5. Keep this User’s Manual for future reference.

NR120 Motherboard

Table of Contents

Chapter 1. Introduction …………………………………………………………………… 1

Motherboard Specification …………………………………………………………………………. 1

NR120 Motherboard Layout …………………………………………………………………….…. 4

Chapter 2. Hardware Installation Process ………………………………………..5

Installing Central Process Unit (CPU) ……………………………………………………………..5

Installing Memory Modules ………………………………………………………………………… 7

Connecting IDE and Floppy Disk Cables and Drives ……………………………………………8

Installing Expansion Cards ……………………………………………………………………….. 10

Connect Power Supply Cable ……………………………………………………………………. 11

I/O Back Panel Introduction ………………………………………………………………………. 12

Jumpers Introduction ……………………………………………………………………………… 14

Chapter 3. AMI® BIOS Setup ………………………………………………………….. 18

Entering Setup ……………………………………………………………………………………... 18

The Main Menu ……………………………………………………………………………………. 18

Standard CMOS Setup …………………………………………………………………………… 19

Advanced CMOS Setup ……….…………………………………………………………………. 20

Advanced Chipset Setup …………………………………………………………………………. 21

Power Management Setup ……………………………………………………………………….. 22

PCI/Plug and Play Setup …………………………………………………………………………. 23

Peripheral Setup …………………………………………………………………………………… 24

Hardware Monitor Setup ………………………………………………………………………….. 25

Auto-Detect Hard Disks …………………………………………………………………………… 26

Change User Password …………………………………………………………………………... 27

Change Supervisor Password ……………………………………………………………………. 28

Auto Configuration with Optimal Settings ……………………………………………………….. 29

Auto Configuration with Fail Safe Settings ……………………………………………………… 30

Save Settings and Exit ……………………………………………………………………………. 31

Exit Without Saving ………………………………………………………………………………... 32

NR120 Motherboard

Chapter 1 Introduction

Motherboard Specifications

Form Factor:

• Standard µATX 9.6”x 9.6”

Processor:

• Supports single IntelPentium4 Processor or Northwood Processor in 478 ball FC-PGA2

package

• Processor socket mPGA478B/uFC-PGA2

• 400 MHz system bus, capable to enhance processor system bus to 533 MHz with Northwood

processor

• Note: Brookdale-GL only supports 400 MHz system bus

Cache Memory:

• Level 1 and level 2 cache memory is integrated in the processor.

System Memory:

• Support 2 x 184 pin DDR DIMM (200Mhz-PC1600 & 266 MHz-PC2100)

• Memory bandwith up to 2.1 GB/s

• Support 64Mb, 128Mb, 256Mb, and 512Mb SDRAM devices

• Support minimum 64MB to 2GB maximum

• Does not support ECC function

• Support suspend-to-RAM sleep state (ACPI S3)

Core Logic Chipset:

• Intel® Brookdale-G/GL GMCH (Graphics Memory Controller Hub) in 788 ball FC-BGA

package

• Intel® ICH4 (I/O Controller Hub 4) in 421 mBGA package

• Intel® 82802AB 4Mb FWH (Firmware Hub) or equivalent

PCI bus:

• PCI 2.2 compliant

• PME# and 3.3Vaux signals to support power management.

Audio:

• ADI AD1981A analog CODEC

• AC’97 Revision 2.2 compliant (Integrated in ICH4)

• Three mini-DIN audio jacks (Line-out, Line-in, and Mic-in)

• Two audio headers, locking type: CD-in, Aux-in

• Audio header for Mic and head phone (option)

• Built in amplifier for mono-out (option)

NR120Motherboard

Integrated Graphics Controller:

• AGP v2.0 compliant

• Enhance graphic engine to boost 2D/3D performance

• Supports 1x/2x/4x AGP data transfers and 2x/4x Fast Writes

• Optimized point-to-point topology using 1.5V signaling in 4x mode

• Integrated 350 Mhz RAMDAC

• Digital flat panel/TV-out support via ADD (AGP Digital Display) card

• Note: Brookdale-GL only supports ADD card

On board EIDE:

• 2x PCI IDE ports supporting up to 4 devices

• Support ATA-100/66/33, Bus Master IDE and PIO modes

On board I/O:

• Low Pin Count SMC LPC47M192

• 1 serial port - DB9 (16550 UART), header for second serial port (option)

• 1 Parallel Port - DB25 with ECP/EPP support

• 1 Floppy port with 1.2MB, 1.44MB and 2.88MB support

• 1 PS/2 mouse connector, 1 PS/2 keyboard connector

• 2 PWM fan controlled output headers

• 6 USB 2.0 ports: 4 ports with RJ/USB in back panel connection, 2 ports with 2X5 header for

front panel connection

• 1 VGA connector, internal VGA is disabled if a AGP card is inserted

BIOS:

• AMI Plug & Play BIOS

• ACPI v2.0 – WfM 2.0 – SMBIOS v2.3 – DMI v2.1 – PC2001

• Auto detect for: CPU Speed, ATA-100

• Wake-on PS/2 (KB, Mouse) & USB devices

• Rapid Boot support

• WOL, ASF support

• Power management: ACPI S3, S4 support

Additional Features:

• Case intrusion header

• Thermal sensor & CPU monitoring

• NIC with integrated MBA boot (complete WOL support)

• BIOS recovery & Boot-Block overwrite via jumper

• Hardware Monitor Capability (LPC47M192)

• Optional On Board LAN

Expansion Slots:

• 1 AGP 2.0 slot (AGP 4X, 1.5 signaling)

• 3 PCI 2.2 slots (including 1 shared CNR slot)

• 1 CNR slot (option)

NR120Motherboard

Other:

• Front panel I/O 2X10 header, key pin 14

• On-board buzzer

NR120Motherboard

NR120 Motherboard Layout

A CPU Socket G Jumper Connector

B CPU Fan Socket H Front Panel Connector

C Memory Sockets I Front Side USB

D Power Supply Connector J Expansion Slots

E Floppy Connector K Audio Connector

F IDE Connectors L Back Panel Connectors

Front Panel Connector Pin Definition

Pin Signal Name I/O Description

1 HD_PWR O Hard Disk LED pull-up (330 ohms) to +5V

2 HDR_BLNK_GRN O Front panel Green LED signal

3 HDA* O Hard Disk Active LED signal

4 HDR_BLNK_YEL O Front panel Yellow LED signal

5 GND - Ground

6 FPBUT_IN I Front panel On/Off button signal

7 FP_RESET* I Front panel Reset button signal

8 GND - Ground

9 +5V O +5V

10 FPSLP* I Front panel sleep button signal

11 IRRX I IRDA serial input receiver

12 GND - Ground

13 GND - Ground

14 KEY X KEY

15 IRTX O IRDA serial output transmit

16 +5V O +5V(PWRLED Power)

17 NC - not connected

18 NC - not connected

19 NC - not connected

20 GND - Ground

K L

NR120 Motherboard

Chapter 2 Hardware Installation Process

Installing the Central Process Unit (CPU)

CPU Installation

1. Unlock the CPU socket by pulling the lever up to a 90-degree angle.

2. Position the CPU above the socket such that the marked corner (pin1) matches the corner near the base

of the lever.

3. Place the CPU into the socket. If the CPU is unable to insert properly, check its orientation and attempt

to re-install.

Warning! Do not force the CPU into the socket. Doing so will prompt bending of the pins and create

damage to the CPU.

4. Close the socket by lowering the lever and locking the lever in place.

Step 1

90 degree angle

Step 2

Pin1

NR120 Motherboard

Installing the Central Process Unit (CPU)

cont.

CPU Heat Sink Installation

1. Read the related CPU heat sink user’s manual for more detailed installation procedures.

2. Connect CPU fan power cable into the CPU fan connector on the motherboard.

CPU Fan Connector

Table des matières

Autres manuels Lite-on Tech Carte mère

Lite-on Tech

Lite-on Tech NA120 Manuel utilisateur

Lite-on Tech

Lite-on Tech NA115 Manuel utilisateur

Lite-on Tech

Lite-on Tech TR100 Manuel utilisateur

Lite-on Tech

Lite-on Tech NA280 Manuel utilisateur

Lite-on Tech

Lite-on Tech Scenic Edition X101 Manuel utilisateur

Lite-on Tech

Lite-on Tech TR101 Manuel utilisateur

Lite-on Tech

Lite-on Tech NA380 Manuel utilisateur

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur