Lippert Components SolidStep 3.0 Premium Step Manuel utilisateur

SolidStep®3.0

Premium Step

OWNER'S MANUAL

(FOR SYSTEMS INSTALLED AFTER MAY 2019)

Rev: 07.06.21 Page 2 CCD-0004367

TABLE OF CONTENTS

Introduction 2

Safety 2

Operation 3

Release Steps 3

Storage of Steps 4

Adjust Leg extension 4

Adjust Transport Lock 4

Notes 5

Introduction

The SolidStep® 3.0 Premium Step is a trailer entry step assembly that can be mounted to the side of any

trailer, providing an ease of entry, regardless of level ground.

Additional information about this product can be obtained from lci1.com/support or the myLCI app is

available for free on Apple App Store® for iPhone® and iPad® and also on Google Play™ for Android™ users.

App Store® and iPad® are registered trademarks of Apple Inc.

Google Play™ and Android™ are trademarks of Google Inc.

For information on the assembly or individual components of this product, please visit:

https://support.lci1.com/steps-support-solidstep.

NOTE: Images used in this document are for reference only when assembling, installing and/or operating

this product. Actual appearance of provided and/or purchased parts and assemblies may differ.

The "WARNING" symbol above is a sign that a procedure has a safety risk involved and may cause

death or serious personal injury if not performed safely and within the parameters set forth in this

manual.

Failure to follow instructions provided in this manual may result in death, serious personal injury

and/or severe product and property damage, including voiding of the component warranty.

Safety

Read and understand all instructions before installing or operating this product. Adhere to all safety labels.

This manual provides general instructions. Many variables can change the circumstances of the instructions,

i.e., the degree of difficulty, operation and ability of the individual performing the instructions. This

manual cannot begin to plot out instructions for every possibility, but provides the general instructions,

as necessary, for effectively interfacing with the device, product or system. Failure to correctly follow the

provided instructions may result in death, serious personal injury, severe product and/or property damage,

including voiding of the LCI limited warranty.

Rev: 07.06.21 Page 3 CCD-0004367

Always wear eye protection when performing service, maintenance or installation procedures.

Other safety equipment to consider would be hearing protection, gloves and possibly a full face

shield, depending on the nature of the task.

The “CAUTION” symbol above is a sign that a safety risk is involved and may cause personal injury

and/or product or property damage if not safely adhered to and within the parameters set forth

in this manual.

Moving parts can pinch, crush or cut. Keep clear and use caution.

No repairs should be attempted by anyone other than a qualied professional. The deployment

and retraction of the step assembly can cause injury if proper precautions are not taken. The step

assembly was designed for an operational weight rating of 400 lbs.

Operation

Release Steps

1. Disengage transport lock (Fig. 1).

2. Firmly grasp and pull out the vertically-stored SolidStep® and firmly rest it on the ground.

3. Adjust leg extensions as needed, see Adjust Leg Extension section.

Fig. 1

Transport Lock

Rev: 07.06.21 Page 4 CCD-0004367

Storage of Steps

1. Retract leg extensions, if desired.

2. Lift up SolidStep® to its stored position and make sure the transport lock has been engaged.

Adjust Leg extension

The leg extension is secured with a quick release clevis pin. Adjustments can be made to the leg extensions

in 1" increments by extending or retracting the inner leg for the optimal angle and to adjust for the ground

surface angle.

1. To extend the inner leg (Fig. 2B):

A. Remove the quick-release clevis pin (Fig. 2A) from the tube and the slot in the angle.

B. Extend the inner leg to the ground and at an angle so the step treads are parallel to the ground

and level.

C. Reinsert the quick release clevis pin into the tube and slot closest to where the inner leg and tube

(Fig. 2C) meet.

2. To retract the inner leg:

A. Remove the quick-release clevis pin from the tube and slot.

B. Retract the inner leg.

C. Reinsert the quick-release clevis pin into the tube and slot.

Fig. 2

Adjust Transport Lock

1. If transport lock adjustment is required, loosen the 3 bolts (Fig.3A) on either side of the adjustable

transport lock. This allows adjustment side-to-side in the latch mechanism.

Fig. 3

Rev: 07.06.21 Page 5 CCD-0004367

2. Once the latch mechanism is in the correct position, tighten the bolts.

NOTE: To ensure control of the SolidStep, keep a firm hold on the steps while testing the functionality.

3. Once the transport lock has been adjusted, test its functionality by shaking the step assembly to

simulate road vibration.

4. Engage and disengage the transport lock (Fig.4A) to ensure the latch flanges do not scrape against the

doorframe.

Do NOT over-tighten the bolts. Over-tightening the bolts may damage the threads or cause the bolt

heads to break o.

Notes

The contents of this manual are proprietary and copyright protected by Lippert Components, Inc. (LCI).

LCI prohibits the copying or dissemination of portions of this manual unless prior written consent from an

authorized LCI representative has been provided. Any unauthorized use shall void any applicable warranty.

The information contained in this manual is subject to change without notice and at the sole discretion of LCI.

Revised editions are available for free download from lci1.com.

Please recycle all obsolete materials.

For all concerns or questions, please contact

Lippert Components, Inc.

Ph: (574) 537-8900 | Web: lci1.com | Email: [email protected]

Table des matières

Autres manuels Lippert Components Accessoires automobiles

Lippert Components

Lippert Components Solera Instructions d'installation

Lippert Components

Lippert Components Innolight Sliding Instructions d'installation

Lippert Components

Lippert Components Solera Manuel utilisateur

Lippert Components

Lippert Components 432223 Manuel utilisateur

Lippert Components

Lippert Components Air Ride 155925 Instructions d'installation

Lippert Components

Lippert Components Happijac Manuel utilisateur

Lippert Components

Lippert Components SolidStep XF Manuel utilisateur

Lippert Components

Lippert Components SolidStep XF Manuel utilisateur

Lippert Components

Lippert Components SOLERA SLIDER Manuel utilisateur

Lippert Components

Lippert Components In-Wall Slide-Out Manuel utilisateur

Lippert Components

Lippert Components Sway Command Manuel

Lippert Components

Lippert Components In-Wall Slide-Out Manuel utilisateur

Lippert Components

Lippert Components Solera Slide Topper Manuel utilisateur

Lippert Components

Lippert Components OneControl Hotspot Manuel utilisateur

Lippert Components

Lippert Components Solera Manuel utilisateur

Lippert Components

Lippert Components Solera Power Awning Manuel d'utilisation et d'entretien

Lippert Components

Lippert Components Kwikee Manuel utilisateur

Lippert Components

Lippert Components COACH STEP Guide de configuration

Lippert Components

Lippert Components ground control TT Instructions d'installation

Lippert Components

Lippert Components Jack-It Manuel utilisateur

Lippert Components

Lippert Components Alumi-Tread series Manuel utilisateur

Lippert Components

Lippert Components Solera Power Awning Manuel d'utilisation et d'entretien

Lippert Components

Lippert Components Sliding Swivel Seat Base Manuel utilisateur

Lippert Components

Lippert Components Solera Classic Instructions d'installation

Manuels Accessoires automobiles populaires d'autres marques

James Baroud

James Baroud Odyssey Manuel utilisateur

Motorola

Motorola i50sx Manuel utilisateur

Yakima

Yakima 9MM STANDARD BIKE MOUNT Manuel utilisateur

Feniex

Feniex T3 Manuel utilisateur

Renault

Renault 77 11 423 180 Manuel utilisateur

Kia

Kia E8300-4D000 Manuel utilisateur

Brink

Brink 756843 Manuel utilisateur

Whispbar

Whispbar K085W Manuel utilisateur

v.link

v.link CI-VL2-PC-HSD Manuel utilisateur

Viking

Viking Stack-Rack Guide de configuration rapide

Aries

Aries 203015 Manuel utilisateur

Choetech

Choetech AT0005 Manuel utilisateur

ZZ2

ZZ2 ZZAIR-PRO Manuel utilisateur

Holman

Holman 4A80L Manuel utilisateur

Thule

Thule 2075 Manuel utilisateur

Motorola

Motorola T325 Manuel utilisateur

TAUBENREUTHER

TAUBENREUTHER 16-3950 Guide d'installation

DV8

DV8 FBJL-02 Manuel utilisateur