LINOVISION IOT-G67 Manuel utilisateur

Outdoor

LoRaWAN®Gateway

IOT-G67

Quick Start Guide

Safety Precautions

Linovision will not shoulder responsibility for any loss or damage resulting from not following the

instructions of this operating guide.

● The device must not be modeled in any way.

● Donot place the device close to objects with naked flames.

●Do not place the device where the temperature is below/above the operating range.

● Do not power on the device or connect it to other electrical device when installing.

● Check lightningand water protection when used outdoors.

●Do not connect or power the equipment using cables that have been damaged.

Related Documents

This Quick Start Guide only explains the installation of G67 LoRaWAN®Gateway. For more

functionality and advanced settings, please refer tothe relevant documents as below.

Document

Description

G67 Datasheet Datasheet for G67 LoRaWAN®Gateway.

G67 User Guide Users can refer to the guide for instruction on how to log in the web GUI, and

how to configure all the settings.

Declaration of Conformity

G67 is in conformity with the essential requirements and other relevant provisions of the CE, FCC, and

RoHS.

Revision History

Date

Doc Version

October 30,2020 V1.0

May 6, 2021 V1.1

J uly 29, 2021 V1.2

For assistance, please contact

Linovision technical support:

Email: sales@Linovision.com

Tel: +86571-86708175

Description

Initial version

Delete optional mark of LoRa antennas, add DC pinouts

Add antenna accessories and installation method

Contents

1.PackingList.......................................................................................................................................................... 4

2. HardwareIntroduction ...................................................................................................................................... 5

2.1Overview .................................................................................................................................................... 5

2.2Dimensions.................................................................................................................................................5

2.3LED Indicators ......................................................................................................................................... 5

2.4Reset Button .............................................................................................................................................. 6

2.5DC Power Connector..................................................................................................................................6

3.HardwareInstallation........................................................................................................................................ 7

3.1SIM CardInstallation ................................................................................................................................7

3.2AntennaInstallation................................................................................................................................ 7

3.3EthernetCable& Power CableInstallation.......................................................................................... 8

3.4Power Supply ........................................................................................................................................... 8

3.5GatewayInstallation ..................................................................................................................................9

3.5.1Wall Mounting................................................................................................................................. 9

3.5.2Pole Mounting ..............................................................................................................................10

4.LogintheWeb GUI .......................................................................................................................................... 11

4.1WirelessAccess ...................................................................................................................................... 11

4.2WiredAccess ........................................................................................................................................... 12

5. NetworkConnection ........................................................................................................................................ 14

5.1ConfiguretheEthernetConnection .........................................................................................................14

5.2ConfiguretheWi-FiConnection ...............................................................................................................14

5.3ConfiguretheCellularConnection ..................................................................................................... 16

6. Packet ForwarderConfiguration...................................................................................................................... 17

7. NetworkServerConfiguration .......................................................................................................................... 19

7.1ConnectUG67to IoT Cloud................................................................................................ 19

7.2ConnectUG67to MQTT/HTTPServer ....................................................................................................20

1. Packing List

Before you begin to install the G67 LoRaWAN®Gateway, please check the package contents to verify

that youhave received the items below.

1 ×Cable Gland 1 ×SIM Dust Cover 2 ×Hose Clamps 1 ×DC Power Cable

1 ×Quick Start Guide 2 ×LoRa Antennas 1 ×Antenna Coaxial

Cable (1m)

1 ×Antenna Clamp Kit

If any of the above items is missing or damaged,please contact your sales representative.

1 ×G67 1 ×PoE Injector 1 ×Mounting Bracket 4 ×Wall Mounting Kits

2. Hardware Introduction

2.1 Overview

2.2 Dimensions (mm)

2.3 LED Indicators

LED

Indication

Status

Description

SYS System Status Green Light Static: the system is runningproperly

Red Light The system goes wrong

LoRa LoRa Status Off Packet Forwarder mode is runningoff

Green Light Packet Forwarder mode is runningwell

LTE Cellular Status

Off SIM card is registeringor fails to register

(or thereare no SIM cards inserted)

Green Light Blinking slowly: SIM card has been registered and

is ready for dial-up

1LoRa Antenna Connector

2Vent Plug

3SIM Slot

4LED Area & Type-CPort & Reset Button

SYS: System Indicator

LoRa: LoRa Indicator

LTE: Cellular Indicator

5DC Power Connector (Solar Connector)

6EthernetPort (PoE)

7Mounting Bracket

Blinking rapidly: SIM card has been registered and

is dialing up now

Static: SIM card has been registered and dialed up

successfully

2.4 Reset Button

Function

Description

SYS LED

Action

Reset

Static Green Press and hold the reset buttonfor more than 5 seconds.

Static Green →

Rapidly Blinking Release the buttonand wait.

Off →Static Green The gateway resets to factory default.

2.5 DC Power Connector

UG67 supports 12 VDC or solar supply via M12 connector.

Color

Description

1 Black GND

2 White Reserved

3 Yellow Reserved

4 Red +12V

3. Hardware Installation

3.1 SIM Card Installation

A. Insert the SIM card into the device according to the direction icon on the device. If you need to take

out the SIM card, press into the SIM card and it will pop up automatically.

B. Tighten the SIM dust cover with wrench to prevent water into the device.

Note: G67 does not support hot plugging (also called hot swapping). please turn off the power before

you insert or take off cards.

3.2 Antenna Installation

G67 supports multiple LoRa antenna types. After installation, please select the corresponding

installation type in web GUI.

Internal Antenna Mode: keep gateway positive outwards to ensure good signal.

Signal Antenna Mode: the external antenna must be installed on ANT1 connector.

Double Antenna Mode: itʼs suggested to add coaxial cable between one of antenna connectors (ANT1 is

recommended) and LoRa antenna to ensure better performance. After installation, the LoRa antenna

can be fixed to a pole via antenna clamp kit. Pass this LoRa antenna through the antenna clamp and fix

it with 4 screws, then wrap the U-boltarounda pole and fix the clamp with nuts and other accessories.

3.3 Ethernet Cable & Power Cable Installation

Pass the Ethernet cable through the cable gland and rotate the cable gland to gateway, then tighten the

cable gland with wrench.

For DC or solar power supply, remove the protective cap of power connector and rotate the DC power

cable into the power connector.

3.4 Power Supply

G67 can be powered by 802.3af standard PoE or 12VDC. Please follow the picture to provide power

supply via PoE injector:

3.5 Gateway Installation

G67 can be mounted to a wall or a pole. Before you start, make sure that your SIM card has been

inserted, your antennas have been attached and all cables have been installed.

Note: Do not connect device to power supply or other devices when installing.

3.5.1Wall Mounting

Preparation: mounting bracket (with a screw), wall plugs, wall mountingscrews and otherrequired

tools.

A. Align the mounting bracket horizontally to the desired position on the wall, use a marker pen to mark

four mounting holes on the wall, and then remove the mountingbracket from the wall.

Note: The connecting lines of adjacent points are at rightangles.

B. Drill four holes with a depth of 32 mm by using your drill with a 6 mm drill bit on the positions you

marked previously on the wall.

C. Insert four wall plugs into the holes respectively.

D. Mount the mounting bracket horizontally to the wall by fixing the wall mounting screws into the wall

plugs.

E. Hang the device to the mountingbracket via bracket mountingscrews on the back of device, then

screw the bracket screw to the bottom of the device.

3.5.2Pole Mounting

Preparation: mountingbracket (with a screw), hose clamp and otherrequiredtools.

A. Loosen the hose clamp by turningthe locking mechanism counter-clockwise.

B. Straighten out the hose clamp and slide it through the rectangular rings in the mountingbracket,

wrap the hose clamp around the pole.

C. Use a screwdriver to tighten the locking mechanism by turningit clockwise.

D. Hang the device to the mountingbracket via bracket mountingscrews on the back of device, then

screw the bracket screw to the bottom of the device.

Table des matières

Autres manuels LINOVISION Porte

LINOVISION

LINOVISION IOT-G65 Manuel utilisateur

Manuels Porte populaires d'autres marques

LST

LST M500RFE-AS Manuel utilisateur

Kinnex

Kinnex Media Gateway Manuel utilisateur

2N Telekomunikace

2N Telekomunikace 2N StarGate Manuel utilisateur

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manuel utilisateur

Telsey

Telsey CPVA 500 - SIP Manuel utilisateur

RTA

RTA 460A-NNA4 Fiche technique

Shaw

Shaw Gateway HDPVR Manuel utilisateur

ABB

ABB VSN900 Guide de démarrage rapide

Commander

Commander Pulse Manuel utilisateur

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manuel utilisateur

NETGEAR

NETGEAR C6300BD Manuel utilisateur

Amit

Amit CDW531AM Manuel utilisateur

HMS

HMS Netbiter EasyConnect EC150 Manuel utilisateur

Huawei

Huawei EchoLife HG620 Manuel utilisateur

AT&T

AT&T U-verse 3801 Manuel d'utilisation et d'entretien

Logic IO

Logic IO RTCU MX2 turbo Manuel utilisateur

Suttle

Suttle MediaMAX MXM-521 Manuel utilisateur