Linksys WTR54GS Manuel utilisateur

Wireless

A Division of Cisco Systems, Inc.

Model No.

Wireless

Quick Installation Guide

Model No.

WTR54GS (EU/LA)

Wireless-G

Package Contents

• Wireless-G Travel Router with SpeedBooster

• Setup CD-ROM with User Guide (English only)

• Power Cable (EU/UK)

• Ethernet Network Cable

• Quick Installation

,GHz

802.11g

Travel Router

with SpeedBooster

APower down your network

devices.

BLocate an optimum location for

the Router. The best place for the

Router is usually at the center of

your wireless network, with line of

sight to all of your mobile stations.

CConnect a standard Ethernet

network cable to the Router’s

Internet port. Then connect the

other end of the network cable to

your broadband modem.

DConnect your computer or

Ethernet device to the Router’s

ethernet port using standard

Ethernet network cabling.

EPower on the broadband

modem.

FConnect the AC power cable to

the Router’s Power port and the

other end into an electrical outlet.

GPower on the PC you wish to use

to configure the Router.

Proceed to Step 2.

1Connect the Router

There are two ways to configure the Router. Choose one of the following:

• Run the Setup CD-ROM - It is strongly recommended that you use the

Setup CD-ROM. Insert the Setup CD-ROM into the CD-ROM drive, and

follow the on-screen instructions.

•Use this Quick Installation guide - If you wish, you can use the Router’s

Web-based Utility. Proceed to Step 1 of this Quick Installation.

AOpen your web browser. Enter

http://192.168.16.1 in its

Address field. Press the Enter

key.

BA password request screen will

appear. Leave the User name

field blank, and enter the

default password, admin, in

the Password field. (For added

security, you should later set a

new password, using the

Administration tab’s

Management screen of the

Web-based Utility). Then click

the OK button.

CThe Web-based Utility will

appear with the Setup tab

selected. If requested by your

Internet Service Provider (ISP),

complete the Host Name and

Domain Name fields. (These

are usually requested by cable

ISPs.) Otherwise, leave them

blank.

Configure the Router

NOTE: Make sure your PC’s Ethernet

adapter is set to obtain an IP address

automatically. For more information,

refer to Windows Help.

DSelect one of the four Internet

Connection Type settings,

shown here. Each Setup

screen and available features

will differ depending on which

connection type you select.

Internet Configuration Type

Automatic Configuration - DHCP:

If you are connecting through

DHCP or a dynamic IP address

from your ISP, keep this default

setting.

Static IP: If your ISP assigns you a

static IP address, select Static IP

from the drop-down menu.

Complete the Internet IP Address,

Subnet Mask, Gateway, and DNS

fields. You need to enter at least

one DNS address.

PPPoE: If you are connecting

through PPPoE, select PPPoE from

the drop-down menu. Complete

the User Name and Password

fields.

Select Keep Alive if you always

want to be connected to your ISP,

or select Connect on Demand if

you are charged for the time that

you are connected to your ISP.

DHCP

Static IP

PPPoE

PPTP: PPTP is a service used in

Europe only.

Complete the Internet IP Address,

Subnet Mask, and Gateway fields.

Complete the User Name and

Password fields.

Select Keep Alive if you always

want to be connected to your ISP,

or select Connect on Demand if

you are charged for the time that

you are connected to your ISP.

EWhen you have finished

entering your Internet

connection settings, click the

Save Settings button to save

your changes.

FTo configure the Router for your

wireless network, select the

Wireless Tab’s Basic Wireless

Settings screen.

GSelect the Wireless Network

Mode:

Mixed: If your network has

Wireless-G and Wireless-B

devices, then keep the default

setting, Mixed.

G-Only: If your network only has

Wireless-G devices, select

G-Only.G

PPTP

B-Only: If your network only has

Wireless-B devices, select

B-Only.

Disable: If you want to disable

wireless networking, select

Disable.

HWireless Network Name (SSID).

The SSID is the network name

shared among all devices in a

wireless network. The SSID must

be identical for all devices in

the wireless network. It is case-

sensitive and must not have

more than 32 characters (use

any keyboard character). For

added security, you should

change the default SSID

(linksys) to a unique name.

IWireless Channel. Select the

appropriate channel from the

list provided to correspond with

your network settings. All

devices in your wireless network

must broadcast on the same

channel in order to function

correctly.

JWireless SSID Broadcast. When

wireless clients survey the local

area for wireless networks to

associate with, they will detect

the SSID broadcast by the

Router. To broadcast the

Router's SSID, keep the default

setting, Enable. If you do not

want to broadcast the Router's

SSID, then select Disable.

KChange these settings as

described here and click the

Save Settings button to apply

your changes.

LPower your broadband

modem off and back on

again.

MRestart or power on your PCs to

acquire the Router’s new

settings.

NTo test the Router’s settings,

open your PC’s web browser. In

the browser’s Address field,

enter

www.linksys.com/registration

and press the Enter key.

Congratulations! The installation of

the Wireless-G Travel Router with

SpeedBooster is complete.

IMPORTANT: Once the Router is

configured, wireless security, either

WEP or WPA, should be configured

to prevent security breaches in your

network.

NOTE: If your wireless adapters

support Secure Easy Setup (SES), you

can use the SES button on the Router

to set them up.

To do this: Press and release the

orange Cisco logo on the Router’s

front panel. When the logo turns white

and begins to flash, press the

adapter’s SecureEasySetup button.

(Up to 10 seconds may pass before

the light begins to flash.) The Router’s

Cisco logo will stop flashing when the

device has been added to the

network. Repeat this procedure for

any additional SecureEasySetup

device.

Refer to the User Guide for further

instructions.

The Router comes equipped with

four types of Wireless Security: WEP,

WPA Personal, WPA2 Personal, and

WPA2 Mixed. These security

methods are not enabled right out

of the box, however. Do configure

wireless security on the Router, do

the following:

AOpen the Router’s Web Utility

as shown in Step 2, and click

the Wireless tab. The Basic

Wireless Settings screen will

appear.

BSelect Wireless Security to

configure wireless security on

the Router.

Directions for the configuration

of WEP, WPA Personal, WPA2

Personal, and WPA2 Mixed

wireless security are provided

here.

CFrom the Security Mode pull-

down menu, select the type of

wireless security you’ll use on

your network.

WEP: WEP is a basic encryption

method, which is not as secure as

WPA. To use WEP, select a Default

Transmit Key (choose which Key to

use), and a level of WEP

encryption, 64 bits 10 hex digits

or 128 bits 26 hex digits. Then

either generate a WEP key using

the Passphrase or enter the WEP

key manually.

Configuring Wireless Security

NOTE: If your wireless adapters

support Secure Easy Setup (SES), you

can use the SES button on the Router

to set up Wireless Security.

Basic Wireless Settings

WEP Security Settings

WPA-Personal. This method offers

two encryption methods, TKIP and

AES, with dynamic encryption keys.

Select the type of encryption

method you want to use, TKIP or

AES. Enter the Passphrase, which

can have 8 to 63 characters. Then

enter the Key Renewal period,

which instructs the Router how

often it should change the

encryption keys.

WPA2-Personal. WPA2-Personal

gives you one encryption method,

AES, with dynamic encryption keys.

Enter a Passphrase of 8-63

characters. Then enter a Key

Renewal period, which instructs

the Router how often it should

change the encryption keys.

WPA2-Mixed. WPA2-Mixed gives

you TKIP+AES encryption. Enter a

Passphrase of 8-63 characters.

Then enter a Key Renewal period,

which instructs the Router how

often it should change the

encryption keys.

DClick the Save Settings button.

Congratulations! Wireless Security

is now configured on the Router.

WTR54GS-EU-LA_V2-QIG-50926NC JL

Linksys is a registered trademark or trademark of

Cisco Systems, Inc. and/or its affiliates in the U.S.

For additional information or troubleshooting

help, refer to the User Guide on the CD-ROM

or the Technical Support Insert. You can also

e-mail for further support.

Website

http://www.linksys.com/international

Product Registration

http://www.linksys.com/registration

WPA Personal

Security Settings

WPA2-Personal

Security Settings

Wireless

A Division of Cisco Systems, Inc.

Modelnr.

Wireless

Installationsvejledning

Modelnr.

WTR54GS (DK)

Trådløs-G

Pakkens indhold

• Trådløs-G Rejserouter med SpeedBooster

• Installations-cd-rom med brugervejledning

(kun på engelsk)

• Strømkabel (EU/UK)

• Ethernet-netværkskabel

• Installationsvejledning

,GHz

802.11g

Rejserouter

med SpeedBooster

Autres manuels pour WTR54GS

Table des matières

Langues :

Autres manuels Linksys Routeur sans fil

Linksys

Linksys SVR200 - One Wireless-G ADSL/EN Services Router... Manuel utilisateur

Linksys

Linksys WET610N - Wireless-N EN Bridge Manuel utilisateur

Linksys

Linksys WRT1900ACS Mode d’emploi

Linksys

Linksys WRT54GX2 - Wireless-G Broadband Router Manuel utilisateur

Linksys

Linksys WRV210 - Wireless-G VPN Router Manuel utilisateur

Linksys

Linksys E2500 Manuel utilisateur

Linksys

Linksys WRT54GR - Wireless-G Broadband Router Manuel utilisateur

Linksys

Linksys WRT55AG - Wireless A+G Broadband Router Manuel utilisateur

Linksys

Linksys WRT300N - Wireless-N Broadband Router... Manuel d'utilisation

Linksys

Linksys Linksys E1500 Manuel utilisateur

Linksys

Linksys MAX-STREAM EA7500 Manuel utilisateur

Linksys

Linksys RangePlus WRT110 Manuel utilisateur

Linksys

Linksys WRT54GL - Wireless-G Broadband Router... Manuel utilisateur

Linksys

Linksys MR8300 Manuel utilisateur

Linksys

Linksys WRT54GL - Wireless-G Broadband Router... Manuel utilisateur

Linksys

Linksys MAX-STREAM MR5500 Series Manuel utilisateur

Linksys

Linksys AC2400 Manuel utilisateur

Linksys

Linksys Wireless Router Manuel utilisateur

Linksys

Linksys WRT300N - Wireless-N Broadband Router... Instructions d'utilisation d'origine

Linksys

Linksys WRT54G2 - Wireless-G Broadband Router Manuel utilisateur

Linksys

Linksys WRT54GR - Wireless-G Broadband Router Instructions d'utilisation d'origine

Linksys

Linksys WRT54GL - Wireless-G Broadband Router... Manuel utilisateur

Linksys

Linksys WRT160N - Wireless-N Broadband Router... Manuel utilisateur

Linksys

Linksys WRT120 Manuel utilisateur

Manuels Routeur sans fil populaires d'autres marques

Milesight

Milesight UG67 Manuel utilisateur

Airlogic

Airlogic AirSync Class 1 Manuel du propriétaire

Samsung

Samsung WCH730B Manuel utilisateur

TELEFONICA

TELEFONICA USB Adapter Manuel utilisateur

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Manuel utilisateur

Askey

Askey RAC2V1K Manuel utilisateur

Alloy

Alloy WLF2454AP-S Manuel utilisateur

TP-Link

TP-Link TL-WR542G Manuel utilisateur

NETGEAR

NETGEAR WNR2000v4 Manuel utilisateur

Hama

Hama 53120 Manuel utilisateur

Intellinet

Intellinet 524582 Manuel utilisateur

Asus

Asus RT-N10P Manuel utilisateur

D-Link

D-Link DIR-506L Manuel utilisateur

Sapido

Sapido GR297n Manuel utilisateur

Asus

Asus DSL-N55U Manuel utilisateur

AMTC

AMTC WR7502 Manuel utilisateur

Compaq

Compaq CP-2W - iPAQ Connection Point Manuel utilisateur

SMC Networks

SMC Networks WBR14-N2 FICHE Manuel utilisateur