Linksys PSUS4 - PrintServer For USB Manuel utilisateur
Model No.
Quick Installation Guide
A Division of Cisco Systems, Inc.
®
WIRED
PSUS4-UK
with 4-Port Switch
PrintServer for USB
Package Contents
• One PrintServer for USB with 4-Port Switch
• One Power Supply
• One Setup CD with User Guide
• One Ethernet Network Cable
• One USB cable
• One Quick Installation
2
1
Before starting the physical installa-
tion, note the PrintServer’s Default
Name on the bottom of the Print-
Server for future use.
APlug one end of the Ethernet
network cable into one of the
PrintServer’s LAN Ports (1-4).
(See Figure A.)
BConnect the other end of the
cable into your networked hub,
switch, or router. The distance
between the PrintServer and
the other device should not
exceed 328 feet (100 meters).
CUse the USB cable to connect
your printer to the PrintServer’s
USB port. Plug the Type A con-
nector end into the PrintServer
(Figure D) and the Type B con-
nector end into the printer.
DPower on your printer.
EPlug the power adapter cord
into the PrintServer’s Power port,
which is located on the right
side of the PrintServer. (See Fig-
ure F.)
FPlug the power adapter into
an electrical outlet.
The PrintServer connection is com-
plete. Go to Step 2.
Connecting the PrintServer
A
IMPORTANT: Make sure to use
the power adapter that is sup-
plied with the PrintServer. Use of
a different power adapter could
damage the PrintServer.
C
E
3
2
C
Configuring the PrintServer
E
AInsert the Setup CD-ROM into
the computer’s CD-ROM drive.
The Setup CD-ROM should run
automatically. If it does not,
click the Start button and
choose Run. In the box that
appears, enter D:\setupWiz-
ard.exe (if “D” is the letter of
your CD-ROM drive).
BWhen you see the Welcome
screen, Figure B, click Setup
Wizard to continue.
CThe screen in Figure C will
appear while the Setup Wizard
is searching for the USB Print-
Server.
DAfter the Setup Wizard has
found the USB PrintServer, the
screen in Figure D will appear.
If this is the first time you have
run the Setup Wizard, make
sure that List only new (uncon-
figured) Print Servers is
selected and your Print Server is
listed by its default server
name. If you have previously
configured the Print Server,
select List all compatible Print
Servers. Click Next to continue.
EThe Password screen, Figure E,
will appear next. Enter the
default password admin in the
field. Click Enter.
D
B
4
FThe Basic Settings screen,
shown in Figure F, will appear. If
you want to change the
Device Name or Domain
Name, enter the Device Name
and Domain Name in the
respective fields. Click Next.
GThe IP Settings screen, Figure
G, appears next. If your network
uses a router with a DHCP Inter-
net Protocol setting that auto-
matically assigns an IP
address, select Automatically
obtain an IP address (DHCP). If
your network uses a static IP
address, select Set IP configu-
ration manually, and enter the
IP Address, Subnet Mask, and
Gateway in the fields provided.
Click Next.
HThe next screen that appears is
the Set PrintServer’s Password
screen, shown in Figure H. If
you want to change your pass-
word, enter your current pass-
word in the Current Password
screen. Enter the new pass-
word in the New Password field,
then enter it again in the Verify
Password field. Click Next.
G
F
H
5
I
IThe Confirmation screen
appears next. See Figure I. Your
old and new settings will be dis-
played. If you want to make a
change, click No. If the settings
are correct and you want to
save the changes, click Yes.
JThe Congratulations screen,
shown in Figure J, will appear
when the setup is complete.
KClick User Install at the bottom
of the screen, and go to Step
3.B.
Configuration of your PrintServer
is complete. J
6
Linksys recommends that you set up
your printer and install your printer’s
driver before you install the Print-
Server’s driver.
AIf you haven’t already done so,
insert the Setup CD-ROM into
the computer’s CD-ROM drive.
When the Setup Wizard’s Wel-
come screen appears, click
User Install to continue.
BWhen the Print Server Driver
Welcome screen appears,
click Next. See Figure B.
CWhen the next screen
appears, Figure C, choose the
location of where the driver’s
folder will be installed. If you
want the folder to be installed
in a different location, click the
Browse button and select the
location. To install the driver in
the default location, click Next
to continue.
DThe next screen to appear is
Select Program Folder, shown
in Figure D. An icon will be
added to the program folder
listed. You may change the
name for the program folder.
Click Next.
EThe next screen that may
appear while the driver is being
installed, is shown in Figure E.
B
Windows Driver Installation
3
C
D
E
7
F
FWhen the driver is installed, the
Setup Complete screen, Figure
F, will appear. The Print Driver
must still be configured, so
make sure that Configure Print
Driver now is selected. Click
Finish to continue.
GThe Information screen
appears next. See Figure G.
Read the information, then
click OK.
HThe Printer Port Setup screen will
appear, as shown in Figure H,
and list the PrintServer and the
connected printers. Select a
printer, then click Next.
If the PrintServer or printer isn’t
listed, make sure that the
cable connections are good
and that the PrintServer and
printer are on.
IYou will be informed that the
PrintServer Port has been
added successfully. (Figure I.)
Click OK.
G
H
I
8
JThe Configure Printer Port
screen will appear, as shown in
Figure J. Your installed printer
will appear in the field. Click
the Connect button to con-
nect the printer for configura-
tion. To add another printer,
click the Add New Printer but-
ton.
The driver installation is complete.
Congratulations!
The PrintServer installation
is complete.
PSUS4-UK-QIG-31010NC JL
For additional information or troubleshooting
help, refer to the User Guide on the Setup CD-
ROM. You can also call or e-mail for further
support.
E-mail Support
United Kingdom and Ireland
Latin America
Website
http://www.linksys.com/international or
http://www.linksys.com/uk
Linksys is a registered trademark or trademark of
Cisco Systems, Inc. and/or its affiliates in the U.S.
and certain other countries. Copyright © 2003
Cisco Systems, Inc. All rights reserved.
J
Modèle
Guide d’installation rapide
A Division of Cisco Systems, Inc.
®
WIRED
PSUS4-FR
avec commutateur 4 ports
Serveur d'impression pour USB
Contenu de l'emballage
• Serveur d'impression pour USB avec
commutateur 4 ports
•Alimentation
• CD-ROM d'installation contenant le Guide de
l'utilisateur
• Câble réseau Ethernet
•CâbleUSB
• Guide d'installation rapide
2
1
Avant de commencer l'installation physique,
notez le nom par défaut du serveur
d'impression figurant en bas du serveur, afin
de pouvoir vous en servir ultérieurement.
ABranchez l'une des extrémités du
câble réseau Ethernet sur l'un des
quatre ports (1-4) LAN du serveur
d'impression (voir figure A).
BBranchez l'autre extrémité du câble
sur votre concentrateur, votre
commutateur ou votre routeur relié
en réseau. La distance entre le
serveur d'impression et l'autre
périphérique ne doit pas excéder
100 mètres.
CLe voyant numéroté correspondant
doit s'allumer.
DReliez votre imprimante au port USB
du serveur d'impression au moyen
d'un câble USB. Branchez le
connecteur de type A sur le serveur
d'impression (figure D) et le
connecteur de type B sur
l'imprimante.
EMettez votre imprimante sous
tension.
FBranchez le cordon de l'adaptateur
électrique sur le port d'alimentation
(Power) du serveur d'impression. Vous
trouverez ce port sur le côté droit du
serveur d'impression (voir figure F).
GBranchez l'adaptateur d'alimentation
sur une prise électrique.
Le branchement du serveur d'impression
est terminé. Passez à l'étape 2.
Connexion du serveur d'impression
A
IMPORTANT : Veillez à utiliser
l'adaptateur électrique fourni avec le
serveur d'impression. De fait,
l'utilisation d'un autre adaptateur
électrique pourrait endommager le
serveur d'impression.
D
F
Autres manuels pour PSUS4 - PrintServer For USB
4
Ce manuel convient aux modèles suivants
1
Table des matières
Langues :
Autres manuels Linksys Serveur d'impression
Linksys
Linksys EFSP42 ver. 2 Manuel utilisateur
Linksys
Linksys WPSM54G - Wireless-G PrintServer With Multifunction Printer Support Print... Instructions d'utilisation d'origine
Linksys
Linksys WPSM54G - Wireless-G PrintServer With Multifunction Printer Support Print... Manuel utilisateur
Linksys
Linksys WPS54GU2 - Wireless-G PrintServer For USB 2.0 Print... Manuel utilisateur
Linksys
Linksys WPSM54G - Wireless-G PrintServer With Multifunction Printer Support Print... Manuel utilisateur
Linksys
Linksys Instant EtherFast EPSX3 Manuel utilisateur
Linksys
Linksys WPSM54G - Wireless-G PrintServer With Multifunction Printer Support Print... Manuel utilisateur
Linksys
Linksys WPSM54G - Wireless-G PrintServer With Multifunction Printer Support Print... Manuel utilisateur
Linksys
Linksys WPS11 ver. 3 Manuel utilisateur
Linksys
Linksys Instant EtherFast EPSX3 Instructions d'utilisation d'origine
Linksys
Linksys WPS11 ver. 3 Manuel utilisateur
Linksys
Linksys EFSP42 ver. 2 Instructions d'utilisation d'origine
Linksys
Linksys WPS54GU2 - Wireless-G PrintServer For USB 2.0 Print... Manuel utilisateur
Linksys
Linksys WPS54G - Wireless-G PrintServer Print Server Manuel utilisateur
Linksys
Linksys WPS54GU2 - Wireless-G PrintServer For USB 2.0 Print... Manuel d'utilisation
Linksys
Linksys WPS54G - Wireless-G PrintServer Print Server Manuel utilisateur
Linksys
Linksys PSUS4 - PrintServer For USB Manuel utilisateur
Linksys
Linksys WPS11 ver. 3 Manuel utilisateur
Linksys
Linksys WPSM54G - Wireless-G PrintServer With Multifunction Printer Support Print... Manuel utilisateur
Linksys
Linksys PPS1UW - EtherFast Wireless-Ready USB PrintServer Print... Manuel utilisateur
