Linksys WET11 - Instant Wireless EN Bridge Network... Instructions d'utilisation d'origine

WET11

Included with the Linksys WET11 Wireless

Ethernet Workgroup Bridge

• Linksys Instant Wireless™ Wireless Ethernet

Workgroup Bridge (1)

• One External Antenna (attached)

• One Power Adapter (2)

• One UTP Category 5 Cable (3)

• One Setup CD-ROM with User Guide (4)

• Quick Installation and Registration Card (not

shown)

A. Plug a crossover or straight

cable into the RJ-45 jack on

the back panel of the

Workgroup Bridge.

B.The X-|| selection switch offers a choice between two settings. Use

the X setting if you are connecting the Workgroup Bridge to a net-

work card or other Ethernet device. Use the || setting if you are

connecting the Workgroup Bridge to a hub or switch.

C. Plug the other end of the

crossover or straight cable

into the RJ-45 jack on the

PC you wish to use to con-

figure the Workgroup

Bridge.

D. Plug the supplied AC power

adapter into the jack on the

back panel of the

Workgroup Bridge. Then

plug the other end into a

power outlet.

E. Proceed to the next section, “Install the Wireless Ethernet

Workgroup Bridge.”

F.After configuration, unplug the crossover or straight cable from the

PC, and plug it into the RJ-45 jack on the Ethernet-ready network

device you wish to add to the WLAN.

A Insert the Setup CD-ROM into your CD-ROM drive.The Setup

Utility should run automatically, and theWelcome screen should

appear. If it does not, click the Start button and choose Run. In the

box that appears, enter D:\setup.exe (where “D” is the letter of your

CD-ROM drive).

B. To install yourWireless

Ethernet Workgroup Bridge,

click on the Install tab.

WWiirreelleessss

EEtthheerrnneett

WWoorrkkggrroouupp

BBrriiddggee

Instant Wireless

Connect the Wireless Ethernet

Workgroup Bridge

Your installation is complete. For setup information or any other

questions, refer to your products User Guide.

WWW.LINKSYS.COM

Installation Process

For more detailed instructions, please refer to the Instant Wireless Wireless

Ethernet Workgroup Bridge User Guide.

Install the Wireless Ethernet

Workgroup Bridge

The configuration of the Wireless Ethernet Workgroup Bridge requires use

of a PC and web browser.

C. When you see this screen,

click the Next button.

D. Enter your User Name and

Company Name.Then click

the Next button.

E. The InstallShield Wizard

will automatically choose a

folder where Setup will

install the utility files. Click

Browse if you want to choose

a different folder. Then click

the Next button.

F. The InstallShield Wizard

will automatically choose a

folder where Setup will

install the program icons. If

you want to create a new

folder, type the new folder’s

name in the Program

Folders: field. Click the Next

button to continue.

G.The InstallShield Wizard has

successfully installed the

Instant Wireless Manager.

Click the Finish button.

A. The Instant Wireless Configuration Utility enables you to conve-

niently configure your LAN connection. It must be accessed from

the Instant Wireless Manager. On the desktop of the PC connected

to the Workgroup Bridge, double-click the Instant Wireless Manager

icon.The InstantWireless Manager will automatically search for

wireless devices on the LAN.

B. When the Instant Wireless

Manager finds an

Workgroup Bridge, its infor-

mation is displayed. In the

list window, double-click the

name of the Wireless

Ethernet Workgroup Bridge

you wish to configure.Then

your default web browser

will automatically open.

C. You will see the following screen.

Type in your User Name and

Password.The first time you access

the Instant Wireless Configuration

Utility, leave the User Name field

blank, and type in the default

Password, admin. Click OK.

Make sure you enter the default

password in lowercase letters.

D. The INFO screen of the Workgroup

Bridge’s Instant Wireless

Configuration Utility will appear.

E. The Instant Wireless Configuration Utility provides five screens for

configuring the Workgroup Bridge’s settings. When you have fin-

ished the configuration, unplug the crossover or straight cable from

the PC, and plug it into the RJ-45 jack on the Ethernet-ready net-

work device you wish to add to theWLAN.

You have now completed installation of the Instant Wireless Manager.

Proceed to the next section, Start the Instant Wireless

Configuration Utility.

WWW.LINKSYS.COM

Start the Instant Wireless

Configuration Utility

Your installation is complete. For setup information or any other questions,

refer to your products User Guide.

QI-WET11-011205NC JL

Autres manuels pour WET11 - Instant Wireless EN Bridge Network...

Table des matières

Autres manuels Linksys Routeur réseau

Linksys

Linksys HomeLink HPB200 Manuel utilisateur

Linksys

Linksys Instant PowerLine PLEBR10 Manuel utilisateur

Linksys

Linksys RangePlus WRT110 Manuel utilisateur

Linksys

Linksys BEPSR11 Manuel utilisateur

Linksys

Linksys WT54GV22 Manuel utilisateur

Linksys

Linksys RV016 Manuel utilisateur

Linksys

Linksys RV082 Manuel utilisateur

Linksys

Linksys max-stream ac-1900 Manuel utilisateur

Linksys

Linksys RT31P2-VU Instructions d'utilisation d'origine

Linksys

Linksys EA4500 Manuel utilisateur

Linksys

Linksys Instant PowerLine PLEBR10 Manuel utilisateur

Linksys

Linksys BEFSR41 - EtherFast Cable/DSL Router Manuel utilisateur

Linksys

Linksys Velop MX4000 Series Manuel utilisateur

Linksys

Linksys PC22224 - ProConnect II 2224 Ethernet Switch Manuel utilisateur

Linksys

Linksys Smart Switch LGS3XX Manuel utilisateur

Linksys

Linksys NR041 Instructions d'utilisation d'origine

Linksys

Linksys EtherFast EF4124 Manuel utilisateur

Linksys

Linksys BEFW11S4 ver.3 Mode d’emploi

Linksys

Linksys WET54GS5 - Wireless-G EN Bridge Instructions d'utilisation d'origine

Linksys

Linksys WET200 - Wireless-G Business Ethernet Bridge Manuel utilisateur

Linksys

Linksys VELOP Manuel utilisateur

Linksys

Linksys WET610N - Wireless-N EN Bridge Manuel utilisateur

Linksys

Linksys WET54G V3 Manuel utilisateur

Linksys

Linksys RVL200 Manuel utilisateur

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

NETGEAR

NETGEAR FS526T - Switch Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité