Linksys RT31P2-VU Instructions d'utilisation d'origine

A Division of Cisco Systems, Inc.

Model No.

Quick Installation

Model No.

RT31P2-VU

with 2 Phone Ports

Broadband Router

Package Contents

• Broadband Router with 2 Phone Ports

• Power Adapter

• Setup Wizard CD-ROM with Norton Internet Security

• Installation and Troubleshooting Guide

•NetworkCable

• Telephone Jack Adapter

• Quick Installation

DIf you have a second phone

line, repeat step C to connect

a telephone or fax machine to

the Router’s PHONE 2 port.

EConnect your cable or DSL

modem’s Ethernet cable to

the Router’s Internet port. (If

your modem only provides a

USB output, then you will need

to upgrade your modem.)

FPower on the cable or DSL

modem.

GConnect the included power

adapter to the Router’s Power

port, and then plug the power

adapter into an electrical

outlet.

The Power LED on the front

panel will light up as soon as

the power adapter is

connected properly.

HPower on the PC you wish to

use to configure the Router.

In Step 2, you will need the setup

instructions provided by your Internet

Service Provider (ISP). If you do not

have this information, then contact

your ISP before proceeding.

The instructions from your ISP tell you

how to set up your PC for Internet

access. Because you are now using

the Router to share Internet access

among several computers, you will

use the setup information to

configure the Router instead of

your PC.

AOpen your PC’s web browser.

Enter http://192.168.15.1 (the

Router’s default local IP

address) in the web browser’s

Address field. Then press the

Enter key.

BA screen will appear and ask

you for a User Name and

Password. Enter admin (the

default) in the User Name and

Password fields. (Later you

should set a new password

using the Administration tab’s

Management screen. This will

help secure access to the

Web-based Utility.)

Then click the OK button.

AMake sure that all of your

hardware is powered off,

including the Router, PCs, and

cable or DSL modem.

BConnect one end of an

Ethernet network cable to one

of the numbered ports on the

back of the Router. Connect

the other end to an Ethernet

port on a network device, e.g.,

a PC, print server, or switch.

Repeat this step to connect

more PCs or other network

devices to the Router.

CIf necessary, disconnect the

telephone cable from the

telephone wall jack and

connect that end to the

telephone jack adapter. Then

connect the adapter to the

Router’s PHONE 1 port.

NOTE: Make sure your PC’s

Ethernet adapter is set to obtain

an IP address automatically. For

more information, refer to

Windows Help.

There are two ways to configure the Router. Choose one of the following:

• Run the Setup CD-ROM - It is strongly recommended that you use the

Setup CD-ROM. Insert the Setup CD-ROM into the CD-ROM drive, and

follow the on-screen instructions.

•Use this Quick Installation guide - If you wish, you can use the Router’s

Web-based Utility. Proceed to Step 1 of this Quick Installation.

1Connect the Router

Configure the Router

NOTE: Makesureyourtelephone

is set to its tone setting (not

pulse).

VoIP

cIn the DNS 1-3 fields, enter the

DNS address(es) provided by

your ISP. You need to enter at

least one DNS address.

dClick the Save Settings button.

3 PPPoE

aIf your ISP says that you are

connecting through PPPoE or if

you normally enter a user

name and password to access

the Internet, then select PPPoE

as the Internet Connection

Type.

bEnter the User Name and

Password provided by your ISP.

(Also enter the Service Name, if

required.)

cSelect Keep Alive if you always

want to be connected to your

ISP, or select Connect on

Demand if you are charged

for the time that you are

connected to your ISP.

dClick the Save Settings button.

eClick the Status tab and then

the Router tab. Click the

Connect button to start the

connection.

CThe Router’s Web-based Utility

will appear with the Basic Setup

screen showing.

DFor the Internet Connection

Type setting, six Internet

connection types are offered

through the drop-down menu.

Depending on which

connection type you select,

the features available on the

Basic Setup screen will differ.

Proceed to the instructions for

the connection type you are

using.

1 Obtain an IP Automatically

(DHCP)

aIf your ISP says that you are

connecting through DHCP or a

dynamic IP address from your

ISP, then select Obtain an IP

automatically as the Internet

Connection Type.

bClick the Save Settings button.

2 Static IP

aIf your ISP says that you are

connecting through a static or

fixed IP address from your ISP,

then select Static IP as the

Internet Connection Type.

bEnter the IP Address, Subnet

Mask, and Gateway Address

provided by your ISP.

ITo test the Router’s settings,

open your web browser from

any computer. In the browser’s

Address field, enter

www.linksys.com and press the

Enter key.

Congratulations! The installation of

the Router is complete.

4PPTP

PPTP is a service used in Europe and

Israel only. If you are using a PPTP

connection, check with your ISP for

the necessary setup information.

5 RAS

RAS is a service used in Singapore

only. If you are using a RAS

connection, check with your ISP for

the necessary setup information.

6 Heart Beat Signal

Heart Beat Signal is a service used in

Australia only. If you are using a Heart

Beat Signal connection, check with

your ISP for the necessary setup

information.

EIf requested by your ISP (usually

cable ISPs), complete the Host

Name and Domain Name

fields. Otherwise, leave them

blank.

FIf you haven’t already done so,

click the Save Settings button.

Then close the web browser.

GPower your cable or DSL

modem off and back on

again.

HRestart or power on your PCs so

they can obtain the Router’s

new settings.

RT31P2-VU-QI-41215A JL

Linksys is a registered trademark or trademark of

Cisco Systems, Inc. and/or its affiliates in the U.S.

Model No.

PPPoE

PPTP

Heart Beat Signal

Obtain an IP

Static IP

Automatically

RAS

For additional information or troubleshooting

help, refer to the Installation and

Troubleshooting Guide on the CD-ROM. You

can also call or e-mail for further support.

Website

http://www.linksys.com

Support

[email protected]

Autres manuels Linksys Routeur réseau

Linksys

Linksys MAX-STREAM EA 7300 Manuel utilisateur

Linksys

Linksys QuickVPN - PC Manuel utilisateur

Linksys

Linksys Linksys E1200 Manuel utilisateur

Linksys

Linksys WET200 - Wireless-G Business Ethernet Bridge Manuel utilisateur

Linksys

Linksys RV042 Instructions d'utilisation d'origine

Linksys

Linksys FGW5500 Manuel utilisateur

Linksys

Linksys WRT160N - Wireless-N Broadband Router... Manuel utilisateur

Linksys

Linksys MR2000 Series Manuel utilisateur

Linksys

Linksys HomeLink HPPO200 Manuel utilisateur

Linksys

Linksys BEFSX41 - Instant Broadband EtherFast Cable/DSL Firewall... Manuel utilisateur

Linksys

Linksys RV016 Manuel d'utilisation

Linksys

Linksys BEFSR41 - EtherFast Cable/DSL Router Manuel utilisateur

Linksys

Linksys EA9300 Manuel utilisateur

Linksys

Linksys VELOP Manuel utilisateur

Linksys

Linksys SRW208G Manuel d'utilisation

Linksys

Linksys Velop Plug-in WHW01P Manuel utilisateur

Linksys

Linksys WET11 - Instant Wireless EN Bridge Network... Instructions d'utilisation d'origine

Linksys

Linksys RV082 Manuel utilisateur

Linksys

Linksys WRT54GL - Wireless-G Broadband Router... Manuel utilisateur

Linksys

Linksys RVS4000 Manuel utilisateur

Linksys

Linksys Hydra 6 Manuel utilisateur

Linksys

Linksys HomeLink HPB200 Manuel utilisateur

Linksys

Linksys WET54GS5 - Wireless-G EN Bridge Manuel d'utilisation

Linksys

Linksys BEFW11S4 ver.3 Mode d’emploi

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

NETGEAR

NETGEAR FS526T - Switch Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité