LINK-MI LM-WE02 Manuel utilisateur

Model No.: LM-WE02

HDMI Wireless Extender with

one-way IR (100M)

VER 1.1

Thank you for purchasing this product

For optimum performance and safety, please read these instructions carefully

before connecting, operating or adjusting this product. Please keep this manual

for future reference.

Surge protection device recommended

This product contains sensitive electrical components that may be damaged

by electrical spikes, surges, electric shock, lighting strikes, etc. Use of surge

protection systems is highly recommended in order to protect and extend the

life of your equipment.

Table of Contents

1st Introduction..............................................................................................................1

2nd Feature.....................................................................................................................1

3rd Package Contents.....................................................................................................2

4th Specification.............................................................................................................2

5th Operation Controls and Functions..........................................................................3

5.1 Transmitter Panel............................................................................................... 3

5.2 Receiver Panel.................................................................................................... 4

5.3 Pairing Instruction.............................................................................................. 4

5.4 Updating Instruction.......................................................................................... 5

5.5 IR Pin Definition..................................................................................................5

6th Application............................................................................................................... 7

1st Introduction

This product is based on H.265 standard solution for distribution one HD

source to one HD display. It extends distance up to 330ft/100 meters between

transmitter and receiver via wireless transmission (An open environment without

Wi-Fi interference), and supports one-way IR control simultaneously. It offers

high quality configurable, low-bandwidth H.265 compression video and

supports resolution up to 1080P@60Hz. This wireless extender is designed

special to transmit high definition video & audio within one room.

This wireless extender offers the most convenient solution for HDMI extension

with long distance capability and doesn’t need to connect CAT cable to

transmission. It is the perfect solution for any application.

2nd Feature

HDMI 1.3, HDCP 1.4 and DVI 1.0 compliant

Supports one HDMI HD source to one HDMI HD display via wireless transmission

With one-way IR control

Video resolution up to 1080P@60Hz

Transmission distance: One-to-one connects transmission distance up to

330ft/100m. (An open environment without Wi-Fi interference.)

Audio format supports PCM 2.0CH 32KHz/44.1KHz/48KHz

H.265 high performance code supported, adopting high bit rate mode

End-to-end delays under 150Ms

Compact design for easy and flexible installation.

3rd Package Contents

Qty

Item

HDMI Wireless Extender (Transmitter)

HDMI Wireless Extender (Receiver)

IR Blaster cable (1.5 meters)

20~60KHz IR Receiver cable (1.5 meters)

5G WiFi Antennas

5V/1A Power Adapters

User Manual

4th Specification

Technical

HDMI Compliance

HDMI 1.3

HDCP Compliance

HDCP 1.4

Video Bandwidth

6.75Gbps

Video Resolution

1080p, 1080i, 720p, 720i, 480p, 480i, the maximum

up to 1920×1080@60Hz

The PC resolution is up to 1920×1200@60Hz

Color Space

RGB/YCbCr 4:4:4, YCbCr 4:2:2, YUV 4:2:0

Color Depth

8/10/12-bit

HDMI Audio Formats

PCM 2.0CH 32KHz/44.1KHz/48KHz

ESD Protection

Human body model — ±8kV (Air-gap discharge) &

±4kV (Contact discharge)

Connections

Transmitter

Inputs: 1x HDMI Type A [19-pin female]

1x SERVICE [Micro USB, Update port]

Outputs: 1x IR OUT [3.5mm Stereo Mini-jack]

2x WiFi OUT [WiFi antenna]

Receiver

Inputs: 1x IR IN [3.5mm Stereo Mini-jack]

2x WiFi IN [WiFi antenna]

1x SERVICE [Micro USB, Update port]

Outputs: 1x HDMI Type A [19-pin female]

Mechanical

Housing

Plastic Enclosure

Color

Black

Dimensions

Transmitter / Receiver:

76mm [W] x 98mm [D] x 21mm [H]

Weight

Transmitter / Receiver: 100g

Power Supply

Input: AC100 - 240V 50/60Hz

Output: DC 5V/1A

Power Consumption

Transmitter : 2.25W, Receiver: 1.8W

Operating

Temperature

32 - 104°F / 0 - 40°C

Storage Temperature

-4 - 140°F / -20 - 60°C

Relative Humidity

20 - 90% RH (no condensation)

Resolution /

Cable Length

1080P60Hz -Feet / Meters

HDMI IN / OUT

42ft / 15M

The use of ‘Premium High Speed HDMI’cable is highly recommended.

5th Operation Controls and Functions

5.1 Transmitter Panel

Name

Function description

Power LED

Red LED indicates that the encoder is powered.

LINK LED

(Green)

■Illuminate: Pair success.

■Flicker quickly: The encoder is pairing.

■Flicker slowly: The encoder and decoder are

transmitting video signal.

■Off: No pair or paired success but no signal transmission.

HDMI IN

HDMI source input.

DC 5V

DC 5V for 5V 1A power adapter.

Antenna port

Connect to WiFi antenna.

PAIR button

■Press quickly the button will reset the encoder to factory default

status.

■Press the button simultaneously both encoder and decoder for 3

seconds will pair.

SERVICE port

Firmware update port.

IR OUT

IR port output for control of the source device.

Antenna port

Connect to WiFi antenna.

5.2 Receiver Panel

Name

Function description

Power LED

Red LED indicates that the decoder is powered.

LINK LED

(Green)

■Illuminate: Pair success.

■Flicker quickly: The decoder is pairing.

■Flicker slowly: The encoder and decoder are transmitting

video signal.

■Off: No pair or paired success but no signal transmission.

HDMI OUT

HDMI output for display.

DC 5V

DC 5V for 5V 1A power adapter.

Antenna port

Connect to WiFi antenna.

PAIR button

■Press quickly the button will copy the EDID of display device

to source device.

■Press the button simultaneously both encoder and decoder

for 3 seconds will pair.

SERVICE port

Firmware update port.

IR IN

IR port input to receiving the signal of IR remote.

Antenna port

Connect to WiFi antenna.

5.3 Pairing Instruction

Power on the transmitter and receiver then press simultaneously the PAIR

button for three seconds, and the LINK LEDs will flicker quickly. If the LINK

LEDs change from flicker quickly to indicate that means pair success. Then

let go of your hands and the LINK LEDs are off. When the encoder and

decoder have signal transmission then the LINK LEDs will flicker slowly.

LINK LED status

(Green)

Description

Flicker quickly

Establish pairing.

Illuminate

Paired success.

Off

No pair or paired success but no signal

transmission.

Flicker slowly

Transmitting video signal.

5.4 Updating Instruction

The update file need to change the name for update.bin then put in the root

directory of U disk. The unit is power off status and inserts the U disk to

SERVICE port. Hold down the PAIR button and power on the unit simultaneously.

The LINK LED indicates when the unit is updating then let go of your

hand. If the update has finished, the LINK LED will automatically off.

5.5 IR Pin Definition

IR Receiver and Blaster pin’s definition as below:

The following is IR system diagram about IR cable use method.

6th Application

Table des matières

Autres manuels LINK-MI Extenseur

LINK-MI

LINK-MI LM-WH100B Manuel utilisateur

LINK-MI

LINK-MI LM-EW53 Manuel utilisateur

LINK-MI

LINK-MI LM-CX100 Manuel utilisateur

LINK-MI

LINK-MI LM-EP36 Manuel utilisateur

LINK-MI

LINK-MI LM-WHS400 Manuel utilisateur

LINK-MI

LINK-MI LM-THF107D Manuel utilisateur

LINK-MI

LINK-MI LM-THF106D Manuel utilisateur

LINK-MI

LINK-MI SX-EX60-3DIR Manuel utilisateur

LINK-MI

LINK-MI EX33 Manuel utilisateur

LINK-MI

LINK-MI LM-WH100 Manuel utilisateur

LINK-MI

LINK-MI LM-THF105H Manuel utilisateur

LINK-MI

LINK-MI LM-HT207KM Manuel utilisateur

LINK-MI

LINK-MI LM-EX150HT Manuel utilisateur

LINK-MI

LINK-MI LM-200H Manuel utilisateur

LINK-MI

LINK-MI LM-HE150 Manuel utilisateur

LINK-MI

LINK-MI LM-DT206FKM Manuel utilisateur

LINK-MI

LINK-MI LM-HT201D Manuel utilisateur

LINK-MI

LINK-MI LM-EX50 Manuel utilisateur

LINK-MI

LINK-MI LM-HE60-POE Manuel utilisateur

LINK-MI

LINK-MI LM-100H Manuel utilisateur

LINK-MI

LINK-MI LM-THF123H Manuel utilisateur

LINK-MI

LINK-MI LM-EX50S Manuel utilisateur

LINK-MI

LINK-MI LM-EX100-4K2K Manuel utilisateur

LINK-MI

LINK-MI LM-K100H Manuel utilisateur

Manuels Extenseur populaires d'autres marques

SY HDBT-60T Manuel utilisateur

Appsys ProAudio

Appsys ProAudio ADX-16 Manuel utilisateur

Atlona

Atlona RS232 Manuel utilisateur

IDK

IDK OPF-TH1000-A Manuel utilisateur

Enable-IT

Enable-IT 824WP Manuel utilisateur

Worx

Worx Landroid RadioLink WA0864 Fiche technique

TP-Link

TP-Link TL-WA730RE Manuel utilisateur

Camplex

Camplex CMX-HDMI-SFPL Manuel utilisateur

SC&T

SC&T HE03-4K Manuel utilisateur

Marmitek

Marmitek MegaView70 Manuel utilisateur

Samsung

Samsung SCS-26UC4 Manuel utilisateur

Foxun

Foxun SX-GES24 Manuel utilisateur

MuxLab

MuxLab 500771 Manuel utilisateur

foxunhd

foxunhd SX-AEX01 Manuel utilisateur

TERK Technologies

TERK Technologies LFIRX2 Manuel utilisateur

Devolo

Devolo Audio Extender Manuel

Edimax

Edimax EW-7438RPn V2 Manuel utilisateur

Shinybow USA

Shinybow USA SB-6335T5 Manuel utilisateur