LINK-MI LM-DEX60 Manuel utilisateur
LM-DEX60
DVI-CAT-60M Extender
U S E R M A N U A L
Operating Instructions
Dear Customer
Thank you for purchasing this product. For optimum
performance and safety, please read these instructions
carefully before connecting, operating or adjusting this
product. Please keep this manual for future reference.
Table of contents
Features
Specifications
Package Contents
Panel Descriptions
Connecting and Operating
Maintenance
Product Service
Warranty
Features
Each set includes one transmitter and one receiver.
Use single UTP LAN cable（Cat6)to substitute DVI cable
to achieve long distance transmission,the UTP Cable
follows the standard of IEEE-568B.
Transmission distance extend up to 60 meters under 1080P
.
Supports HDMI signal.
Supports lossless compressed digital audio:Dolby TrueHD,
DTS-HD Master Audio.
Transmit Digital Audio and Video over the CAT6 cable
with zero signal loss.
Data transfer speed 6.75 Gbps.
DC 5V power supply.
Specifications
Operating Temperature Range
-5 to +35℃(+23 to +95℉)
Operating Humidity Range
5 to 90%RH (No Condensation)
Input Video Signal
0.5-1.0 Volts P-P
Input DDC Signal
5 volts p-p(TTL)
Support Video Format
DTV/HDTV:UP TO 1920x1200
Video Output
DVI/HDMI
Support Audio Format
DTS-HD Master Audio、Dolby true-HD
etc.
Transmission Distance
1080P 8-bit 60m(Maximum) over single
CAT6 /24AWG/Solid
Power consumption
5watts(Maximum)
Dimension (L×W×H)
84x58x22mm
Net Weight
550g(Pair)
Note1: Specifications are subject to change without notice. Mass and dimensions
are approximate.
① Sink must support 3D video when sources is 3D device
② When in 36Bits deepcolor mode, we suggest set the HDMI source device to output 1080 i
or 720p.
Package Contents
1) Main Unit: Transmitter & Receiver
2) DC 5V 1A x2PCS
3) Operating Instructions
NOTICE
Our company reserve the right to make changes in the hardware, packaging and
any accompanying documentation without prior written notice.
Panel Descriptions
Transmitter Panel
OUT：RJ45 OUT EDID: Copy EDID or EDID reset
DC5V: 5V Power input
PW: Power LED SIG: Signal input led
DVI IN: DVI/HDMI input
Receiver Panel
IN: RJ45 IN DC5V： 5V Power input
PW: Power LED SIG: Signal input led
DVI OUT: DVI/HDMI output
Connecting and Operating
1) Connect the DVI signal sources (Such as PC etc) to
DVI Transmitter.
2) Connect CAT6 cables to both the outputs of the
transmitter and inputs of the Receiver. (The cables
must follow the standard of EIA-TIA 568B).
3) Connect the DVI output (Such as HD-LCD, HD-DLP) into the
Receiver.
Attention: Insert/Extract cables gently.
Product Service
1) Damage requiring service:
The unit should be serviced by qualified service personnel
if:
(a) The DC power supply cord or AC adaptor has been
damaged;
(b) Objects or liquids have gotten into the unit;
(c) The unit has been exposed to rain;
(d) The unit does not operate normally or exhibits a marked
change in performance;
(e) The unit has been dropped or the cabinet damaged.
2) Servicing Personnel: Do not attempt to service the unit
beyond that described in these operating instructions.Refer
all other servicing to authorized servicing personnel.
3) Replacement parts: When parts need replacing ensure the
servicer uses parts specified by the manufacturer or parts
that have the same characteristics as the original parts.
Unauthorized substitutes may result in fire, electric
shock, or other hazards.
4) Safety check: After repairs or service, ask the servicer
to perform safety checks to confirm that the unit is in
proper working condition.
Warranty
If your product does not work properly because of a
defect in materials or workmanship, our Company (referred
to as "the warrantor" ) will, for the length of the period
indicated as below, (Parts(2)Year, Labor(90) Days) which
starts with the date of original purchase ("Limited
Warranty period"), at its option either(a) repair your
product with new or refurbished parts, or (b) replace it
with a new of a refurbished product. The decision to repair
or replace will be made by the warrantor.
During the "Labor" Limited Warranty period there will be no
charge for labor.
During the "Parts" warranty period, there will be no
charge for parts. You must mail-in your product during the
warranty period. This Limited Warranty is extended only to
the original purchaser and only covers product purchased as
new. A purchase receipt or other proof of original purchase
date is required for Limited Warranty service.
Table des matières
Autres manuels LINK-MI Extenseur
LINK-MI
LINK-MI SX-EX60-3DIR Manuel utilisateur
LINK-MI
LINK-MI LM-EX100-4K2K Manuel utilisateur
LINK-MI
LINK-MI LM-THF105H Manuel utilisateur
LINK-MI
LINK-MI LM-HE60-POE Manuel utilisateur
LINK-MI
LINK-MI LM-SD500 Manuel utilisateur
LINK-MI
LINK-MI LM-120H-4K Manuel utilisateur
LINK-MI
LINK-MI LM-CX100 Manuel utilisateur
LINK-MI
LINK-MI LM-EX50S Manuel utilisateur
LINK-MI
LINK-MI LM-WX700 Manuel utilisateur
LINK-MI
LINK-MI LM-HE150 Manuel utilisateur
LINK-MI
LINK-MI LM-HT207KM Manuel utilisateur
LINK-MI
LINK-MI LM-EP36 Manuel utilisateur
LINK-MI
LINK-MI Balun Series Manuel utilisateur
LINK-MI
LINK-MI LM-DT200 Manuel utilisateur
LINK-MI
LINK-MI LM-CX100IR Manuel utilisateur
LINK-MI
LINK-MI LM-EX50 Manuel utilisateur
LINK-MI
LINK-MI EX33 Manuel utilisateur
LINK-MI
LINK-MI LM-THF123HKM Manuel utilisateur
LINK-MI
LINK-MI LM-HT201D Manuel utilisateur
LINK-MI
LINK-MI LM-WH100 Manuel utilisateur
