Linear Technology 1446 Manuel utilisateur

DEMO CIRCUIT 1446 QUICK START GUIDE - LTC6909

3 TO 8 OUTPUT MULTIPHASE OSCILLATOR WITH SSFM

DESCRIPTION

DEMO CIRCUIT 144

QUICK START GUIDE

LTC690

3 TO 8 OUTPUT MULTIPHASE OSCILLATOR with SSFM

Demonstration circuit 1446 features the LTC6909 multi-

ple output oscillator with spread spectrum frequency

modulation (SSFM). The LTC®6909 is an easy to use

precision oscillator that can provide 1-, 2-, 3-, 4-, 5-, 6-,

7- or 8-phase synchronized outputs. The LTC6909

spread spectrum frequency modulation (SSFM), can be

enabled to improve electromagnetic compatibility (EMC)

performance. Eight separate outputs provide up to eight

rail-to-rail, 50% duty cycle clock signals. Using three

logic inputs, the outputs are configured for phase separa-

tion, ranging from 45° to 120° (three to eight phases).

The clock outputs can also be held low or configured for

Hi-Z. A single resistor (RSET) combined with the phase

configuration, sets the output frequency, based on the

following formula:

OUT

= (20MHz x 10k)/(RSET x PH)

where PH = 3, 4, 5, 6, 7 or 8

the f

OUT

range is 12.5kHz to 6.67MHz.

The PH0, PH1 and PH2 logic inputs define the LTC6909

multi-phase mode of operation and control its outputs as

follows:

PH2 PH1 PH0 MODE

0 0 0 All Outputs Are Floating (Hi-Z)

0 0 1 All Outputs Are Held Low

0 1 0 3-Phase Mode (PH = 3)

0 1 1 4-Phase Mode (PH = 4)

1 0 0 5-Phase Mode (PH = 5)

1 0 1 6-Phase Mode (PH = 6)

1 1 0 7-Phase Mode (PH = 7)

1 1 1 8-Phase Mode (PH = 8)

A DC1446 contains an LTC6909 and test terminals for

the eight outputs. On board jumpers are provided to set

the LTC6909 phase inputs (PH0, PH1 and PH2) and the

SSFM modulation. The on board frequency setting resis-

tor (RSET) is pre-loaded with a 100k surface mount re-

sistor (in addition, two pin receptacles are provided for

using a leaded RSET resistor).

Design files for this circuit board are available.

Call the LTC factory.

LTC, LT are registered trademarks of Linear Technology Corporation.

QUICK START PROCEDURE

Demonstration circuit 1446 is easy to set up and test.

Refer to Figure 1 for the quick test setup and follow the

procedure below:

1. Place jumpers in the following positions:

JP3 (PH0) to V+, JP4 (PH1) to V+, JP1 (PH2) to V+ and

JP1 (MOD) to SSFM OFF.

2. Set the power supply to 5V.

3. Turn on the power supply.

4. With a 10x probe connected to OUT1 the oscilloscope

should show a 5V, 250kHz, squarewave (±4.5%).

Downloaded from Arrow.com.

DEMO CIRCUIT 1446 QUICK START GUIDE - LTC6909

3 TO 8 OUTPUT MULTIPHASE OSCILLATOR WITH SSFM

QUICK START SET-UP

Figure 1.

Quick Test Setup

Single Power Supply

Oscilloscope

NOTE: The 6909 outputs (OUT1-OUT8) can drive 1k and 50pF loads. If a spectrum analyzer is used to measure the

spread spectrum bandwidth then use a high impedance probe to monitor the outputs (typically the input impedance

of a spectrum analyzer is 50 ohms).

Downloaded from Arrow.com.Downloaded from Arrow.com.

DEMO CIRCUIT 1446 QUICK START GUIDE - LTC6909

3 TO 8 OUTPUT MULTIPHASE OSCILLATOR WITH SSFM

Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

DEMO CIRCUIT 1446 QUICK START GUIDE - LTC6909

3 TO 8 OUTPUT MULTIPHASE OSCILLATOR WITH SSFM

DC1446 PARTS LIST

Item Qty Reference Part Description Manufacturer / Part #

1 1 C1 CAP., X7R, 10uF, 10V, 20% 1206 AVX, 1206ZC106MAT2A

2 2 C5,C2 CAP., X7R, 0.1uF, 16V, 10% 0402 TDK, C1005X7R1C104K

3 2 C3,C6 CAP., X5R, 1uF, 6.3V, 10% 0402 TDK, C1005X5R0J105K

4 1 C4 CAP., C0G, 1000pF, 25V, 5% 0402 TDK, C1005C0G1E102J

5 2 E1,E2 JACK, BANANA KEYSTONE, 575-4

6 10 E3-E12 TESTPOINT, TURRET, .094" pbf MILL-MAX, 2501-2-00-80-00-00-07-0

7 3 JP1,JP3,JP4 3 PIN 0.079 SINGLE ROW HEADER SAMTEC, TMM103-02-L-S

8 1 JP2 2X4, 0.079 DOUBLE ROW HEADER SAMTEC, TMM104-02-L-D

9 4 xJP1-xJP4 SHUNT, .079" CENTER SAMTEC, 2SN-BK-G

10 0 RSET(open) Res., 0805

11 2 E13,E14 Pin, 0.057 hole Mill-Max, 8427-0-15-15-30-84-04-0

12 1 U1 IC., LTC6909CMS, MSOP-16 Linear Tech., LTC6909CMS

13 4 (STAND-OFF) STAND-OFF, NYLON 0.375" KEYSTONE, 8832(SNAP ON)

Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

Ce manuel convient aux modèles suivants

Autres manuels Linear Technology Matériel informatique

Linear Technology

Linear Technology DC1304A-A Manuel utilisateur

Linear Technology

Linear Technology LTC6930 Series Manuel utilisateur

Linear Technology

Linear Technology 1464 Manuel utilisateur

Linear Technology

Linear Technology LTC3588-1 Guide de dépannage

Linear Technology

Linear Technology DC2159A Manuel utilisateur

Linear Technology

Linear Technology LTC6905 Series Manuel utilisateur

Linear Technology

Linear Technology 968A-D Manuel utilisateur

Linear Technology

Linear Technology DC2455A-C Guide de configuration rapide

Linear Technology

Linear Technology DC1007C Manuel utilisateur

Linear Technology

Linear Technology DC2041A Manuel utilisateur

Linear Technology

Linear Technology LTC2430 Manuel utilisateur

Linear Technology

Linear Technology LTC2923 Manuel utilisateur

Linear Technology

Linear Technology LTC3718 Manuel utilisateur

Linear Technology

Linear Technology LTC2933 Manuel utilisateur

Linear Technology

Linear Technology LTC2195 Manuel utilisateur

Linear Technology

Linear Technology LTC2172-12 Manuel utilisateur

Linear Technology

Linear Technology LTC6417 Manuel utilisateur

Linear Technology

Linear Technology LT8608 Manuel utilisateur

Linear Technology

Linear Technology DC2460A Guide de configuration rapide

Linear Technology

Linear Technology LT3740EDHC Manuel utilisateur

Linear Technology

Linear Technology DEMO CIRCUIT 1446 Manuel utilisateur

Linear Technology

Linear Technology LT6411 Manuel utilisateur

Linear Technology

Linear Technology Analog Devices DC2773A-B Manuel utilisateur

Linear Technology

Linear Technology LTC3220 Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur