Lightmybricks 75954 Manuel utilisateur

The following page is the instructions for the Light My Bricks LEGO Hogwarts

Great Hall (75954) LED light kit.

If you run into any issues, please refer to the online troubleshooting guide.

To ensure a trouble-free installation of your light kit, please read and follow

each step carefully. These instructions can be downloaded in PDF format here

Please note: This page lists instructions for the LED light kit only. If you are

wishing to purchase the Light My Bricks LEGO Hogwarts Great Hall (75954) LED

Light My Bricks: LEGO Hogwarts Great Hall

75954 Lighting Kit

light kit , please click here to view the product page

Package Contents:

8x White 30cm Bit Lights

4x White 15cm Micro Bit Lights

3x Green Strip Lights

1x White Strip Light

1x Flicker Effects Boards

1x Micro 4-Port Expansion Board

2x 6-Port Expansion Boards

2x 5cm Connecting Cables

3x 15cm Connecting Cables

2x 30cm Connecting Cables

1x AA Battery Pack (Requires 3x AA Batteries)

6x Adhesive Squares

LEGO Pieces:

6x Black Plate 1×6

4x Black Tile 1×1 with Clip

4x Black 1×1 Modiﬁed Plate Rounded with Handle

1x Black Round Plate 1×1 with open stud

1x Black Plate 1×2 modiﬁed with stud jumper

3x Trans Clear Plate w Rounded Bottom 2×2

Important things to note:

Laying cables in between and underneath bricks

Cables can ﬁt in between and underneath LEGO® bricks, plates, and tiles

providing they are laid correctly between the LEGO® studs. Do NOT forcefully

join LEGO® together around cables; instead ensure they are laying comfortably

in between each stud.

CAUTION: Forcing LEGO® to connect over a cable can result in damaging the

cable and light.

Connecting cable connectors to Expansion Boards

Take extra care when inserting connectors to ports of Expansion Boards.

Connectors can be inserted only one way. With the expansion board facing up,

look for the soldered “=” symbol on the left side of the port. The connector side

with the wires exposed should be facing toward the soldered “=” symbol as you

insert into the port. If a plug won’t ﬁt easily into a port connector, do not force it.

Incorrectly inserting the connector can can result in bent pins inside the port

or possible overheating of the expansion board when connected.

Connecting cable connectors to Strip Lights

Take extra care when inserting connectors to ports on the Strip Lights.

Connectors can be inserted only one way. With the Strip Light facing up, ensure

the side of the connector with the wires exposed is facing down. If a plug won’t

ﬁt easily into a port connector, don’t force it. Doing so will damage the plug and

the connector.

Installing Bit Lights under LEGO® bricks

and plates.

When installing Bit Lights under LEGO® pieces, ensure they are placed the

correct way up (Yellow LED component exposed). You can either place them

directly on top of LEGO® studs or in between.

OK, Let’s Begin!

1.) We will begin with installing spot lights to the exterior of the Great Hall. First,

take out the following provided LEGO pieces to make up an angled spot light.

2x Black Plate 1×6

1x Black Tile 1×1 with Clip

1x Black 1×1 Modiﬁed Plate Rounded with Handle

Take a Green Strip Light and using it’s adhesive backing, stick it onto the base

of the black 1×6 plate for the spot light

2.) Repeat the previous step to build another 3 spot lights using provided

pieces and Green Strip Lights as per below:

4x Black Plate 1×6

2x Black Tile 1×1 with Clip

2x Black 1×1 Modiﬁed Plate Rounded with Handle

2x Green Strip Lights

3.) Take a 15cm Connecting Cable and connect it between two of the spot

lights, then take a 30cm Connecting Cable and connect one end to the right

strip light as shown below:

Connect the two spot lights to the front of the great hall in the below positions,

then tuck the 15cm connecting cable underneath the base of the hall.

4.) Take the other end of the 30cm Connecting Cable and connect it to the

third spot light (green strip light’s left port), then bring it around to the right

side of the hall. Disconnect and discard the following grey angled tile and

connect the spot light to this position.

Hide the 30cm cable in between the spot lights underneath the base of the hall

as shown below.

5.) Take the AA Battery Pack and insert 3x AA Batteries to it. Connect the

battery pack cable to the left port on the spot light on the left of the Hall. Turn

ON the battery pack to test the spot lights are working OK.

6.) Take a new 15cm Connecting Cable and connect it to the third green Strip

Light. Connect the other end of the cable to a 6-Port Expansion Board.

Table des matières

Autres manuels Lightmybricks Équipement d'éclairage

Lightmybricks

Lightmybricks 75336 Manuel utilisateur

Lightmybricks

Lightmybricks LEGO ORCHID Manuel utilisateur

Lightmybricks

Lightmybricks 42125 Manuel utilisateur

Lightmybricks

Lightmybricks LEGO MARVEL SPIDER-MAN CARNAGE Manuel utilisateur

Lightmybricks

Lightmybricks LEGO HOGWARTS EXPRESS COLLECTORS EDITION Manuel utilisateur

Lightmybricks

Lightmybricks 76423 Manuel utilisateur

Lightmybricks

Lightmybricks LEGO THE OFFICE 21336 LIGHT KIT Manuel utilisateur

Lightmybricks

Lightmybricks 21338 Manuel utilisateur

Lightmybricks

Lightmybricks LEGO STAR WARS VENATOR-CLASS REPUBLIC ATTACK... Manuel utilisateur

Lightmybricks

Lightmybricks LEGO AIRBUS H175 RESCUE HELICOPTER 42145 LIGHT... Manuel utilisateur

Lightmybricks

Lightmybricks LEGO SANTA'S VISIT 10293 Manuel utilisateur

Lightmybricks

Lightmybricks LEGO Harley-Davidson Fatboy 10269 Lighting... Manuel utilisateur

Lightmybricks

Lightmybricks 75574 Manuel utilisateur

Lightmybricks

Lightmybricks LEGO THE MANDALORIAN HELMET 75328 Manuel utilisateur

Lightmybricks

Lightmybricks LEGO UCS RAZOR CREST Manuel utilisateur

Lightmybricks

Lightmybricks 75322 Manuel utilisateur

Lightmybricks

Lightmybricks LEGO TALES OF THE SPACE AGE 21340 Manuel utilisateur

Lightmybricks

Lightmybricks LEGO VENETIAN HOUSES 910023 Manuel utilisateur

Lightmybricks

Lightmybricks 75252 Manuel utilisateur

Lightmybricks

Lightmybricks LEGO PALACE CINEMA 10232 LIGHT KIT Manuel utilisateur

Lightmybricks

Lightmybricks LEGO 1989 Batwing Manuel utilisateur

Lightmybricks

Lightmybricks LEGO Ship In A Bottle 21313 Lighting Kit Manuel utilisateur

Lightmybricks

Lightmybricks LEGO BOOKSHOP Manuel utilisateur

Lightmybricks

Lightmybricks LEGO 75277 Manuel utilisateur

Manuels Équipement d'éclairage populaires d'autres marques

Brizo

Brizo 8SP-MU-4 Manuel utilisateur

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manuel utilisateur

IKEA

IKEA BJÖRKSPIREA Manuel utilisateur

Laserworld

Laserworld Evolution Series ES-400RGB Manuel utilisateur

Alien

Alien RG STAR Manuel utilisateur

EuroLite

EuroLite LED B-40 Manuel utilisateur

Qazqa

Qazqa Suplux SL 3 Black 103062 Manuel utilisateur

Commercial Electric

Commercial Electric 54568141 Manuel utilisateur

CREE LIGHTING

CREE LIGHTING 304 Series Manuel utilisateur

Goobay

Goobay 49867 Manuel utilisateur

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manuel utilisateur

Alkalite

Alkalite Krypton KT-81 Manuel utilisateur

Clas Ohlson

Clas Ohlson GU10 Manuel utilisateur

DTS

DTS DELTA 10 F Manuel utilisateur

ring

ring Solar Steplight Manuel utilisateur

One Stop Gardens

One Stop Gardens 57696 Instructions de montage

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manuel utilisateur

SIREM

SIREM Swimeo A2 Manuel utilisateur