Lightmybricks 75244 Manuel utilisateur

Table des matières

Autres manuels Lightmybricks Équipement d'éclairage

Lightmybricks

Lightmybricks LEGO EMPIRE STATE BUILDING Manuel utilisateur

Lightmybricks

Lightmybricks LEGO IMPERIAL LIGHT CRUISER 75315 LIGHT KIT Manuel utilisateur

Lightmybricks

Lightmybricks Fire Brigade Manuel utilisateur

Lightmybricks

Lightmybricks LEGO ELF CLUB HOUSE 10275 LIGHT KIT Manuel utilisateur

Lightmybricks

Lightmybricks 42125 Manuel utilisateur

Lightmybricks

Lightmybricks LEGO TALES OF THE SPACE AGE 21340 Manuel utilisateur

Lightmybricks

Lightmybricks 75252 Manuel utilisateur

Lightmybricks

Lightmybricks 71016 Manuel utilisateur

Lightmybricks

Lightmybricks 75325 Manuel utilisateur

Lightmybricks

Lightmybricks 42156 Manuel utilisateur

Lightmybricks

Lightmybricks SUPER MARIO THE MIGHTY BOWSER 71411 Manuel utilisateur

Lightmybricks

Lightmybricks LEGO HOCUS POCUS THE SANDERSON SISTERS' COTTAGE 21341 LIGHT... Manuel utilisateur

Lightmybricks

Lightmybricks LEGO OPTIMUS PRIME Manuel utilisateur

Lightmybricks

Lightmybricks LEGO THE OFFICE 21336 LIGHT KIT Manuel utilisateur

Lightmybricks

Lightmybricks LEGO ALPINE LODGE Manuel utilisateur

Lightmybricks

Lightmybricks LEGO Harley-Davidson Fatboy 10269 Lighting... Manuel utilisateur

Lightmybricks

Lightmybricks LEGO Hogwarts Castle 71043 Lighting Kit Manuel utilisateur

Lightmybricks

Lightmybricks 75954 Manuel utilisateur

Lightmybricks

Lightmybricks LEGO PAC-MAN ARCADE 10323 LIGHT KIT Manuel utilisateur

Lightmybricks

Lightmybricks LEGO PARISIAN RESTAURANT 10243 LIGHT KIT Manuel utilisateur

Lightmybricks

Lightmybricks LEGO NATURAL HISTORY MUSEUM Manuel utilisateur

Lightmybricks

Lightmybricks LEGO Kessel Run Millennium Falcon 75212 Manuel utilisateur

Lightmybricks

Lightmybricks Sydney Opera House Manuel utilisateur

Lightmybricks

Lightmybricks 76423 Manuel utilisateur

Manuels Équipement d'éclairage populaires d'autres marques

Brizo

Brizo 8SP-MU-4 Manuel utilisateur

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manuel utilisateur

IKEA

IKEA BJÖRKSPIREA Manuel utilisateur

Laserworld

Laserworld Evolution Series ES-400RGB Manuel utilisateur

Alien

Alien RG STAR Manuel utilisateur

EuroLite

EuroLite LED B-40 Manuel utilisateur

Qazqa

Qazqa Suplux SL 3 Black 103062 Manuel utilisateur

Commercial Electric

Commercial Electric 54568141 Manuel utilisateur

CREE LIGHTING

CREE LIGHTING 304 Series Manuel utilisateur

Goobay

Goobay 49867 Manuel utilisateur

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manuel utilisateur

Alkalite

Alkalite Krypton KT-81 Manuel utilisateur

Clas Ohlson

Clas Ohlson GU10 Manuel utilisateur

DTS

DTS DELTA 10 F Manuel utilisateur

ring

ring Solar Steplight Manuel utilisateur

One Stop Gardens

One Stop Gardens 57696 Instructions de montage

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manuel utilisateur

SIREM

SIREM Swimeo A2 Manuel utilisateur

The following page is the instructions for the Light My Bricks LEGO Star Wars

Tantive IV (75244) LED light kit.

If you run into any issues, please refer to the online troubleshooting guide.

To ensure a trouble-free installation of your light kit, please read and follow

each step carefully. These instructions can be downloaded in PDF format here

Please note: This page lists instructions for the LED light kit only. If you are

wishing to purchase the Light My Bricks LEGO Star Wars Tantive IV (75244) LED

light kit , please click here to view the product page

Light My Bricks: LEGO Star Wars Tantive IV

75244 Lighting Kit

Package Contents:

11x White 30cm Bit Lights

10x Cool White 30cm Bit Lights

4x Red 30cm Bit Lights

2x Flashing Red 30cm Bit Lights

4x 6-Port Expansion Boards

1x 8-Port Expansion Boards

1x 12-Port Expansion Boards

1x Multi Effects Board

1x Gun Effects Board

1x Set of Wireless Power Connectors (possitive and negative)

2x 5cm Connecting Cables

3x 15cm Connecting Cables

1x 30cm Connecting Cable

6x Adhesive Squares

1x USB Power Cable 30cm

LEGO Pieces:

4x Trans Clear Round Plate 1×1

1x Trans Clear Plate 1×2

Important things to note:

Laying cables in between and underneath bricks

Cables can ﬁt in between and underneath LEGO® bricks, plates, and tiles

providing they are laid correctly between the LEGO® studs. Do NOT forcefully

join LEGO® together around cables; instead ensure they are laying comfortably

in between each stud.

CAUTION: Forcing LEGO® to connect over a cable can result in damaging the

cable and light.

Connecting cable connectors to Expansion Boards

Take extra care when inserting connectors to ports of Expansion Boards.

Connectors can be inserted only one way. With the expansion board facing up,

look for the soldered “=” symbol on the left side of the port. The connector side

with the wires exposed should be facing toward the soldered “=” symbol as you

insert into the port. If a plug won’t ﬁt easily into a port connector, do not force it.

Incorrectly inserting the connector can can result in bent pins inside the port

or possible overheating of the expansion board when connected.

Connecting cable connectors to Strip Lights

Take extra care when inserting connectors to ports on the Strip Lights.

Connectors can be inserted only one way. With the Strip Light facing up, ensure

the side of the connector with the wires exposed is facing down. If a plug won’t

ﬁt easily into a port connector, don’t force it. Doing so will damage the plug and

the connector.

Installing Bit Lights under LEGO® bricks

and plates.

When installing Bit Lights under LEGO® pieces, ensure they are placed the

correct way up (Yellow LED component exposed). You can either place them

directly on top of LEGO® studs or in between.

OK, Let’s Begin!

1.) We will ﬁrst install lights to the cockpit. Start by disconnecting the roof

section on each side, then disconnect the following middle sections as shown

below:

Disassemble the middle section as shown below, then take the red and trans

dark clear pieces.

2.) Take 2x Cool White 30cm Bit Lights and with the cables facing the right

side, place both of them over the studs of the red plate. Secure them in place by

reconnecting the trans dark clear plates over the top. The 2 LEDs should ﬁt

nicely inside the studs of the trans dark clear plates.

Reconnect the following section on top, then ﬂip it over and push the cables

down into the corner before reconnecting it to the two white arch bricks. Lay

the two cables down the middle in between studs before reconnecting the

right section over the top of the cables.

Flip this section over and ensure both cables are tucked in between white

bricks, then ﬂip it back over and reconnect the middle section on top.

3.) Take a new Cool White 30cm Bit Light and using an Adhesive Square, stick

it underneath the middle section in the below position with cable facing the

back.