Lightmybricks 103024 Manuel utilisateur

Light My Bricks : Ghostbusters Firehouse Headquarters LED

Lighting Kit

Here is the instructions document for the Lego Ghostbusters Firehouse Headquarters

LED lighting kit. Please read and follow the steps carefully to ensure this lighting kit is

installed properly.

Package contents:

 6x White Strip Lights

 13x White 30 cm Bit Lights

 3x Flashing Red 30cm Bit Lights

 1x Flashing White 30cm Bit Light

 1x 12-port Expansion Board

 2x 6-port Expansion Boards

 1x 4-port Traffic Light Effects Board

 1x Battery Pack (3x AA batteries not included)

 10x Adhesive squares

Connecting Cables

 4x 15cm cable

 5x 30cm cable

Extra Lego Pieces

 6x plate 1×6 (for mounting strip lights)

 2x trans red 1×1 round plate

 1x trans green 1×1 round plate

 1x trans orange 1×1 round plate

 2x trans red 1×1 round brick

 2x light grey 1×1 modified brick with stud on one side

 2x light grey “tap”

Important things to note:

Laying cables in between and underneath bricks

Cables can fit in between and underneath LEGO® bricks, plates, and tiles providing they

are laid correctly between the LEGO® studs. Do NOT forcefully join LEGO® together

around cables; instead ensure they are laying comfortably in between each stud.

CAUTION: Forcing LEGO® to connect over a cable can result in damaging the cable

and light.

Connecting cable connectors to Strip Lights

Take extra care when inserting connectors to ports on the Strip Lights. Connectors can be

inserted only one way. With the Strip Light facing up, ensure the side of the connector

with the wires exposed is facing down. If a plug won’t fit easily into a port connector, don’t

force it. Doing so will damage the plug and the connector.

Connecting cable connectors to Expansion Boards

Take extra care when inserting connectors to ports of Expansion Boards. Connectors can

be inserted only one way. With the expansion board facing up, look for the soldered “=”

symbol on the left side of the port. The connector side with the wires exposed should be

facing toward the soldered “=” symbol as you insert into the port. If a plug won’t fit easily

into a port connector, do not force it.

WARNING: Incorrectly inserting the connector can result in bent pins inside the port or

possible overheating of the expansion board when connected.

Installing Bit Lights under LEGO® bricks and plates.

When installing Bit Lights under LEGO® pieces, ensure they are placed the correct way

up (Yellow LED component exposed). You can either place them directly on top of

LEGO® studs or in between.

OK, Let’s Begin!

Instructions for installing this kit

1.) This lighting kit is installed from the bottom up. Start by opening the building and

removing the 2nd and top levels of the modular building.

We will be installing lights to the traffic light first. Remove the traffic light and pole, then

disassemble the traffic light starting from the left yellow plate.

Autres manuels Lightmybricks Équipement d'éclairage

Lightmybricks

Lightmybricks 21338 Manuel utilisateur

Lightmybricks

Lightmybricks LEGO SANCTUM SANCTORUM Manuel utilisateur

Lightmybricks

Lightmybricks LEGO HOGWARTS CASTLE AND GROUNDS LIGHT KIT Manuel utilisateur

Lightmybricks

Lightmybricks LEGO STAR WARS EXECUTOR SUPER STAR DESTROYER 75356 LIGHT... Manuel utilisateur

Lightmybricks

Lightmybricks 76403 Manuel utilisateur

Lightmybricks

Lightmybricks LEGO Hogwarts Castle 71043 Lighting Kit Manuel utilisateur

Lightmybricks

Lightmybricks LEGO BMW M 1000 RR 42130 Manuel utilisateur

Lightmybricks

Lightmybricks LEGO Porsche 911 RSR 42096 Lighting Kit Manuel utilisateur

Lightmybricks

Lightmybricks 103335 Manuel utilisateur

Lightmybricks

Lightmybricks 76989 Manuel utilisateur

Lightmybricks

Lightmybricks 71016 Manuel utilisateur

Lightmybricks

Lightmybricks LEGO PAC-MAN ARCADE 10323 LIGHT KIT Manuel utilisateur

Lightmybricks

Lightmybricks LEGO THE OFFICE 21336 LIGHT KIT Manuel utilisateur

Lightmybricks

Lightmybricks LEGO CORNER GARAGE Manuel utilisateur

Lightmybricks

Lightmybricks LEGO LOOP COASTER Manuel utilisateur

Lightmybricks

Lightmybricks 75306 Manuel utilisateur

Lightmybricks

Lightmybricks 40426 Manuel utilisateur

Lightmybricks

Lightmybricks LEGO STAR WARS ENDOR SPEEDER CHASE DIORAMA Manuel utilisateur

Lightmybricks

Lightmybricks LEGO NASA Apollo Saturn V 21309 Lighting Kit Manuel utilisateur

Lightmybricks

Lightmybricks LEGO HOGWARTS ICONS Manuel utilisateur

Lightmybricks

Lightmybricks LEGO BUGATTI CHIRON 2.0 Manuel utilisateur

Lightmybricks

Lightmybricks LEGO THE GLOBE Manuel utilisateur

Lightmybricks

Lightmybricks LEGO ORCHID Manuel utilisateur

Lightmybricks

Lightmybricks 75339 Manuel utilisateur

Manuels Équipement d'éclairage populaires d'autres marques

Brizo

Brizo 8SP-MU-4 Manuel utilisateur

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manuel utilisateur

IKEA

IKEA BJÖRKSPIREA Manuel utilisateur

Laserworld

Laserworld Evolution Series ES-400RGB Manuel utilisateur

Alien

Alien RG STAR Manuel utilisateur

EuroLite

EuroLite LED B-40 Manuel utilisateur

Qazqa

Qazqa Suplux SL 3 Black 103062 Manuel utilisateur

Commercial Electric

Commercial Electric 54568141 Manuel utilisateur

CREE LIGHTING

CREE LIGHTING 304 Series Manuel utilisateur

Goobay

Goobay 49867 Manuel utilisateur

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manuel utilisateur

Alkalite

Alkalite Krypton KT-81 Manuel utilisateur

Clas Ohlson

Clas Ohlson GU10 Manuel utilisateur

DTS

DTS DELTA 10 F Manuel utilisateur

ring

ring Solar Steplight Manuel utilisateur

One Stop Gardens

One Stop Gardens 57696 Instructions de montage

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manuel utilisateur

SIREM

SIREM Swimeo A2 Manuel utilisateur