Lightmybricks 75252 Manuel utilisateur

Please note: This page lists instructions for the LED light kit only.

Package Contents:

34x Cool White 30cm Bit Lights

3x Flashing White 30cm Bit Light

4x Flashing Red 30cm Bit Light

5x Cool White 30cm Large Bit Lights

20x Green 15cm Micro Bit Lights

11x White 30cm Micro Bit Lights

Effects and Expansion Boards

1x Pulse Effects Board

1x Gun Effects Board

1x Multi Effects Board

1x Flicker Effects Board

7x Micro 4-Port Expansion Boards

1x Micro 8-Port Expansion Boards

1x 2-Port Expansion Board

6x 6-Port Expansion Boards

1x 8-Port Expansion Boards

3x 12-Port Expansion Boards

Connecting Cables:

9x 5cm Connecting Cables

6x 15cm Connecting Cables

5x 30cm Connecting Cables

2x 50cm Connecting Cable 1x USB

Power Cable

LEGO Pieces:

28x Trans Clear Round Plate 1×1

4x Trans Light Blue Round Plate 1×1

1x Trans Clear Tile 1×2

1x Trans Black Cone 1×1 with Top Groove

1x Trans Clear Slope 30 1x1x2/3

Important things to note:

Laying cables in between and underneath bricks

Cables can fit in between and underneath LEGO® bricks, plates, and tiles providing they are laid

correctly between the LEGO® studs. Do NOT forcefully join LEGO® together around cables;

instead ensure they are laying comfortably in between each stud.

CAUTION: Forcing LEGO® to connect over a cable can result in damaging the cable and light.

Connecting cable connectors to Expansion Boards

Take extra care when inserting connectors to ports of Expansion Boards. Connectors can be

inserted only one way. With the expansion board facing up, look for the soldered “=” symbol on

the left side of the port. The connector side with the wires exposed should be facing toward the

soldered “=” symbol as you insert into the port. If a plug won’t fit easily into a port connector, do

not force it.

Incorrectly inserting the connector can can result in bent pins inside the port or possible

overheating of the expansion board when connected.

Connecting cable connectors to Strip Lights

Take extra care when inserting connectors to ports on the Strip Lights.

Connectors can be inserted only one way. With the Strip Light facing up, ensure the side of the

connector with the wires exposed is facing down. If a plug won’t fit easily into a port connector,

don’t force it. Doing so will damage the plug and the connector.

Connecting Micro Cable connectors to Micro Expansion Board

Ports

Take extra care when inserting the micro connectors to micro ports of Micro Expansion Boards.

Connecting Micro Bit Lights to Micro Expansion Boards is similar to connecting lights and cables

to Strip Lights. With the expansion board facing up, ensure the side of the connector with the

wires exposed is facing down. If a plug won’t fit easily into a port connector, do not force it. Use

your fingernail to push the plastic part of the connector to the micro port.

Installing Bit Lights under LEGO® bricks and plates.

When installing Bit Lights under LEGO® pieces, ensure they are placed the correct way up (Yellow

LED component exposed). You can either place them directly on top of LEGO® studs or in

between.

OK, Let’s Begin!

1.) Start by disconnecting the following sections from the top of the ship.

Use your LEGO removal tool to disconnect the following pieces to allow us to remove the

two panels that make up the entire left section of the ship.

Table des matières

Autres manuels Lightmybricks Équipement d'éclairage

Lightmybricks

Lightmybricks LEGO Brick Bank 10251 Light Kit Manuel utilisateur

Lightmybricks

Lightmybricks LEGO Star Wars Slave 1 75060 Lighting Kit Manuel utilisateur

Lightmybricks

Lightmybricks 75339 Manuel utilisateur

Lightmybricks

Lightmybricks LEGO 75274 Manuel utilisateur

Lightmybricks

Lightmybricks 103375 Manuel utilisateur

Lightmybricks

Lightmybricks 75954 Manuel utilisateur

Lightmybricks

Lightmybricks 40426 Manuel utilisateur

Lightmybricks

Lightmybricks 42125 Manuel utilisateur

Lightmybricks

Lightmybricks 76209 Manuel utilisateur

Lightmybricks

Lightmybricks LEGO MEDIEVAL CASTLE Manuel utilisateur

Lightmybricks

Lightmybricks 75349 Manuel utilisateur

Lightmybricks

Lightmybricks LEGO HOCUS POCUS THE SANDERSON SISTERS' COTTAGE 21341 LIGHT... Manuel utilisateur

Lightmybricks

Lightmybricks LEGO JAZZ QUARTET 21344 Manuel utilisateur

Lightmybricks

Lightmybricks 76423 Manuel utilisateur

Lightmybricks

Lightmybricks LEGO DC BATCAVE SHADOW BOX 76252 LIGHT KIT Manuel utilisateur

Lightmybricks

Lightmybricks LEGO 75277 Manuel utilisateur

Lightmybricks

Lightmybricks 10278 Manuel utilisateur

Lightmybricks

Lightmybricks LEGO NATURAL HISTORY MUSEUM Manuel utilisateur

Lightmybricks

Lightmybricks 76403 Manuel utilisateur

Lightmybricks

Lightmybricks LEGO HOGWARTS EXPRESS COLLECTORS EDITION Manuel utilisateur

Lightmybricks

Lightmybricks LEGO 1989 Batwing Manuel utilisateur

Lightmybricks

Lightmybricks 21057 Manuel utilisateur

Lightmybricks

Lightmybricks LEGO THE OFFICE 21336 LIGHT KIT Manuel utilisateur

Lightmybricks

Lightmybricks LEGO ELF CLUB HOUSE 10275 LIGHT KIT Manuel utilisateur

Manuels Équipement d'éclairage populaires d'autres marques

Brizo

Brizo 8SP-MU-4 Manuel utilisateur

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manuel utilisateur

IKEA

IKEA BJÖRKSPIREA Manuel utilisateur

Laserworld

Laserworld Evolution Series ES-400RGB Manuel utilisateur

Alien

Alien RG STAR Manuel utilisateur

EuroLite

EuroLite LED B-40 Manuel utilisateur

Qazqa

Qazqa Suplux SL 3 Black 103062 Manuel utilisateur

Commercial Electric

Commercial Electric 54568141 Manuel utilisateur

CREE LIGHTING

CREE LIGHTING 304 Series Manuel utilisateur

Goobay

Goobay 49867 Manuel utilisateur

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manuel utilisateur

Alkalite

Alkalite Krypton KT-81 Manuel utilisateur

Clas Ohlson

Clas Ohlson GU10 Manuel utilisateur

DTS

DTS DELTA 10 F Manuel utilisateur

ring

ring Solar Steplight Manuel utilisateur

One Stop Gardens

One Stop Gardens 57696 Instructions de montage

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manuel utilisateur

SIREM

SIREM Swimeo A2 Manuel utilisateur