LG PQRCUCS0C Guide de démarrage rapide

ENGLISH ITALIANO ESPAÑOL FRANÇAIS DEUTSCH

êìëëäàâ

Simple Wired Remote Controller

IMPORTANT

• Please read this installation manual completely

before installing the product.

• Installation work must be performed in

accordance with the national wiring standards

by authorized personnel only.

• Please retain this installation manual for future

reference after reading it thoroughly.

Owner's & Installation Manual

Visit us at : http://www.lgservice.com

Models: PQRCUCS0C

2Simple Wired Remote Controller

Simple Wired Remote Controller Owner’s & Installation Manual

TABLE OF CONTENTS

■Safety Precautions..............................................................3~4

■Part Description ..................................................................5~6

■Wired remote controller switch information .........................7

■Installation Method .................................................................8

■Necessary functions before using .................................9~11

• Trial Operation..........................................................................................9

• Celsius/Fahrenheit Switching ...............................................................10

• Setting the Central Control Address ....................................................11

• ESP Function ..........................................................................................12

■How to use the Mode Selection Button.........................13~19

• Cooling Operation ..................................................................................13

• Heating Operation ..................................................................................14

• Auto-Operation .......................................................................................15

• Dry(Dehumidification) Operation ..........................................................16

• Fan Operation .........................................................................................16

• Fan Speed Selection ..............................................................................17

• Indoor Temperature Display..................................................................18

• Auto Swing..............................................................................................18

• Child Lock ...............................................................................................19

• Different Mode Operation .....................................................................20

Note) Please, refer to indoor's manual for product's detail information of subfunction

Safety Precautions

Owner’s & Installation Manual 3

ENGLISH

■Installation

Safety Precautions

• The installation requires expert skills, and it should be installed by the service center or other shops specialized

in the installation and recognized by our company.

• For all the problems arising after installation by someone who has no relevant qualifications, LG will not provide

free service.

• The following safety cautions are provided to prevent unexpected dangers or losses.

: If the user does not follow the mandatory items, it may result in serious injury or death.

: If the user does not follow the mandatory items, it may cause personal injury or property

damage.

: Warning and Caution are to call the user’s attention to the possible danger. Read and follow

them carefully in order to prevent a safety accident.

: Warning and Caution are indicated in this guide and the product itself to help protect the users

from danger.

WARNING

CAUTION

WARNING

Entrust installation of the

product to the service center

because improper installation

may cause fire, an electric

shock, explosion, and physical

injury.

Use the original parts in

order to prevent fire, an

electric shock, explosion,

and product breakdown.

Keep combustible and/or

inflammable materials away

from the product in order to

prevent fire or product

breakdown.

Do not disassemble, repair, or

modify the product at your

discretion in order to prevent fire

or an electric shock.

Do not install the product in wet

and humid areas in order to

prevent product breakdown.

Do not expose the product to the

sun in order to prevent product

breakdown.

Do not modify or lengthen the

power cable at your discretion.

It may cause fire or an electric

shock.

Do not place a heating device

near the product. It may cause

fire.

Do not drop water on to the

product. It may cause an electric

shock or product breakdown.

Do not place something heavy on

the power cable. It may cause fire

or an electric shock.

Do not place a heavy thing on the

product. It may cause product

breakdown.

If the product was submerged

under water, ask the service

center for instruction. It may

cause fire or an electric shock

unless you do that.

■In-use

Safety Precautions

4Simple Wired Remote Controller

■In-use

Make sure children or senor

citizens use the product under

proper observation in order to

prevent safety accident.

Do not subject the product to

shock. It will cause product

breakdown.

Do not pick the product with a

sharp tool. It may cause

product breakdown with the

damage to its parts.

Do not clean the product with strong cleanser such

as solvent. Use soft clothes in order to prevent fire

or product deformation.

Do not touch the product with a wet hand. Do not

pull the lead cable. It may cause product breakdown

or an electric shock.

CAUTION

Part Description

Owner’s & Installation Manual 5

ENGLISH

Part Description

PQRCUCS0C

FAN

SPEED

MODE

TEMP

Cooling Heating Auto Dry Fan

Defrost Preheat Out door

Slo

Med

Room Temp

Total on

Central Run

Accessory

Connecting Cable

(1EA)

Fixing Screw (2EA) Owner / Installation

Manual

Installation Paper

1. Operation Display Panel

2. On/Off Button

3. Fan Speed Button

4. Temperature Control Button

5. Mode Selection Button

Simple Wired Remote Controller

Each function will be shown on the display panel for three seconds or so when the power is applied at first.

Wired remote controller switch information

6Simple Wired Remote Controller

Wired remote controller switch information

S/W 1

SW±GR

SW±HI

Room Temp. Sensing

Ceiling Height/Default E.S.P

Group Control

SW±PD

SW±TH

Select Product

321

Group control switch

1. For individual control/Master use

2. For group control/Slave use

Ceiling height selection switch

1. Low ceiling

2. Standard ceiling

3. High ceiling

Product selection switch

1. Cooling Only product

2. Heat Pump product

Indoor temperature sensor

selection switch

1. Use the temperature sensor on the remote

controller.

2. Use the temperature sensor on the product.

3. Use the sensors on the product and remote

controller.

• When changing the product selection switch and group control switch, the power must be reconnected to reflect

the changes.

• The central control could operate inappropriately depends on indoor unit type, when the remote controller is set

as slave.

Installation Method

Owner’s & Installation Manual 7

ENGLISH

CN-REMO

LO2K

J15

LO1K

LO1D C07D

C01K

J14

CN-DISP

CN-M CN-ZONEC

IC01A

The position of the fixing screws

Side of

remote Controller

Side of

Indoor Unit

Main

indoor unit

Red Yellow Brown

Main frame

Fixing the

remote controller

2cm

Put the installation paper on the place and determine the

position and height of the fixing screws of the wired remote

controller.

• Refer to the printed side of the installation paper.

Plug the connecting cable into the indoor unit.

• The product is being shipped with the cable

connected only to the remote controller.

Fix the connecting cable with the cable rack.

Remove the installation paper before installing

the remote controller so that it can fit at the right

place.

* Do not embed the remote controller into the wall. (It may cause the breakdown of the temperature

sensor.)

* If you want to install a number of remote controller at the same place in a vertical line, install them at

regular intervals of 2cm. (It may cause the breakdown of the temperature sensor.)

* Do not install the cable with a distance of 50 m or longer. (This can cause communication error.)

* When installing the cable, check whether the connector between the remote controller and the product is

installed properly. The connector will not be connected when installed in opposite sides.

❏Supply the power after connecting wired remote controller.

When you need to change wired remote controller, switch off the main power and change it.

If the wired remote controller is changed before switching off the main power, the option function of the indoor

unit can't be used. (option function like "slo" fan speed selection)

Installation Method

8Simple Wired Remote Controller

Installation Method

GND

12V

B Y R B Y R

MASTER SLAVE

Signal wire GND

12V

Signal wire

PQRCUCS0C

FAN

SPEED

MODE

TEMP

Cooling Heating Auto Dry Fan

Defrost Preheat Out door

Slo

Med

RoomTemp

Totalon

CentralRun

PQRCUCS0C

FAN

SPEED

MODE

TEMP

Cooling Heating Auto Dry Fan

Defrost Preheat Out door

Slo

Med

RoomTemp

Totalon

CentralRun

Group control

1. When installing more than 2 units of air conditioner to one wired remote

controller, please connect as the below picture.

2. When installing more than 2 wired remote controllers to one air conditioner,

please connect as the below picture.

• When installing more than 2 units of wired

remote controller to one air conditioner, set

one wired remote controller as master and

the others all as slaves, as shown in the right

picture.

• Refer to Switch information section on how to

set master/slave.

❈In case of this, you should set the slide

switch of two remote controller as same

value.

Ex) 1. Master Remote controller

- SW_TH : 3

- SW_HI : 2

2. Slave Remote controller

- SW_TH : 3

- SW_HI : 2

❈In case of using the event

communication indoor units please set

the remote controller as Master.

❈In case of using the non-event

communication indoor units please set

the remote controller as Slave.

<When simultaneously connecting

2 sets of wired remote controller>

❈In this case, please use below cable.

- Model Name : PZCWRCG3

❊

Some products can not connect 2 wired remote controllers to one air conditioner.

It depends on the product type. For more detail, refer to the product manual.

GND

12V

Signal wire

MASTER SLAVE

Signal wire

GND

12V

Signal wire

PQRCUCS0C

FAN

SPEED

MODE

TEMP

Cooling Heating Auto Dry Fan

Defrost Preheat Out door

Slo

Med

RoomTemp

Totalon

CentralRun

PQRCUCS0C

FAN

SPEED

MODE

TEMP

Cooling Heating Auto Dry Fan

Defrost Preheat Out door

Slo

Med

RoomTemp

Totalon

CentralRun

Indoor units applied event communication Indoor units unapplied event communication

Owner’s & Installation Manual 9

ENGLISH

Necessary functions before using

Out door

Room Temp

Total on

Central Run

Defrost Preheat

PQRCUCA0

FAN

SPEED

MODE

The trial operation is to check the installation status of the product. The temperature will not be controlled during

trial operation. Instead the product will operate in several modes such as cooling, strong wind, comp-on.

* This function might not be available for Multi Product like Multi V system.

If you want to set the trial operation mode, press the

mode button and the Fan speed button same time for

three seconds.

Then the product will begin the trial operation and the

display will be like as shown on left side picture.

If you want to cancel the trial operation mode, just

press the On/Off button.

The trail operation will be shut down automatically

after 18 minutes and system will go to the standby

mode.

Trial Operation

Necessary function before using

10 Simple Wired Remote Controller

PQRCUCS0C

FAN

SPEED

MODE

Room Temp

Total on

Central Run

Defrost Preheat Out door

Out door

Room Temp

Total on

Central Run

Defrost Preheat

Room Temp

Total on

Central Run

Defrost Preheat Out door

Out door

Room Temp

Total on

Central Run

Defrost Preheat

TEMP

If you want to change the temperature unit as the

Celsius or Fahrenheit, press the Temperature control

button( ) and the Fan speed button same time for

three seconds to enter the setting Mode.

Press the temperature control button to change the

unit.

Ex) Setting unit as Fahrenheit.

After setting, press the Temperature control button( )

and the Fan speed button same time for three seconds

to exit the setting Mode.

The system will automatically release without input

after 30 seconds.

Celsius/Fahrenheit Switching

Table des matières

Autres manuels LG Télécommande

LG AKB732955 Manuel utilisateur

LG AN-MR3005 Manuel d'utilisation

LG AN-MR300Q Manuel d'utilisation

LG Magic Remote AN-MR19BA Manuel utilisateur

LG MR20GA Manuel utilisateur

LG Magic Remote Manuel utilisateur

LG AN-SP700 Manuel d'utilisation

LG AN-PM19BA Manuel d'utilisation

LG Magic Remote Manuel d'utilisation

LG WCR-800 Manuel utilisateur

LG PQRCHCA0Q Guide de démarrage rapide

LG PREMTB001 Manuel de service

LG Magic Remote AN-MR400P Manuel d'utilisation

LG PQRCUCA0 Guide de démarrage rapide

LG Magic Motion Remote M4-Media Manuel d'utilisation

LG PQWRHSF0 Guide de démarrage rapide

LG AN-MR650A Manuel utilisateur

LG PQWRCDF0 Guide de démarrage rapide

LG MR22GN Manuel utilisateur

LG Magic Remote AN-MR19BA Manuel utilisateur

LG AKB732955 Manuel d'utilisation

LG Smart AC Manuel utilisateur

LG Magic Remote AN-MR19BA Manuel utilisateur

LG V-NET ACS PREMTA000A Manuel utilisateur

Manuels Télécommande populaires d'autres marques

Panasonic

Panasonic EUR7622KB0 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen Beo4 Manuel utilisateur

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manuel utilisateur

Multiplex

Multiplex PROFI TX 9 Manuel utilisateur

One Remote

One Remote RMB4 Manuel utilisateur

FUTABA

FUTABA 9ZAP - PART2 Manuel utilisateur

HR Matic

HR Matic HR MULTI 3 Manuel utilisateur

Yamaha

Yamaha ACC-GNRST-30-20 Manuel utilisateur

EisSound

EisSound KBSOUND Manuel utilisateur

Marantz

Marantz RC101 Manuel utilisateur

Conrad

Conrad FS20 TC6 Manuel utilisateur

Anritsu

Anritsu MP1777A Manuel utilisateur

Niles

Niles WVC100 Guide de dépannage

RCA

RCA RCU1300 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen BEO6 Manuel utilisateur

GE 94901 Manuel utilisateur

Onbon

Onbon YQ1-75 Manuel utilisateur

FUTABA

FUTABA R7108SB Instructions d'installation