LG 55EH5C Guide de démarrage rapide

55EH5C

www.lg.com

*MFL69588404*

Please read this manual carefully before operating your set and retain it

for future reference.

EASY SETUP GUIDE

LG Digital

Signage

(MONITOR SIGNAGE)

https://youtu.be/6t5lcuROngM

(1906-REV02)

ENGENGLISH

AAA

FRONT

(M4 x L8)

(M3 x L4.5)

(Φ3 x L6) (Φ3 x L10) (M4 x L10)

ENGENGLISH

You can download the web manuals for this product at the following websites.

(Keyword: EH5C)

•www.lg.com/id-manual

SuperSign: http://partner.lge.com

ENGENGLISH

Network

ENGENGLISH

Network

ENGENGLISH

1 Open the product box, then remove the packaging materials and the T-con box in the order they appear.

T-con box

2 Connect the cables to the Signage box. Here, the HDMI cable with the FRONT label is attached to the top, and the

HDMI cable without the FRONT label is attached to the bottom.

In the case of 16/22 pin cables, connect the cable with the red mark to the upper part. Connect the 16/22 pin

cable with the longer neck to the display set.

FRONT

ENGENGLISH

3 Attach the 16/22 pin cables using the 2 screws (M3 x L4.5).

4 If installing onto a ceiling or wall, attach the mounting brackets to the Signage box using four screws (M4 x L8).

5 Position the jack cover to fit the cables to the cut spaces and then attach it using the 2 screws (M3 x L4.5).

ENGENGLISH

6 Fold the connectors on the opposite side of the 16/22 pin cables to make them parallel to the cable.

7 Insert the connectors of the 16/22 pin cables into the tubes.

8 Pass the cables through the hole in the middle of the SET.

FRONT

ENGENGLISH

9 Connect the HDMI cable with the label marked ‘FRONT’ to the FRONT side. Insert the 16/22 pin cable with the red

mark to the cable holder and connect it using a screw (M3 x L4.5).

FRONT

Connect the HDMI cable (without the label marked ‘FRONT’) to the REAR side. Insert the 16/22 pin cable (without

the red mark) to the cable holder and connect it using a screw (M3 x L4.5).

When installing the product to a stand (excluding a ceiling mount or a wall mount), remove the 2 screws, change

the direction of the LG logo, and then reassemble it.

ENGENGLISH

Cover the FRONT side with the T-con box cover (with the IR receiver) and attach it using 4 screws (Φ3 x L6) on

the opposite side.

Cover the REAR side with the other T-con box cover and attach it using 2 screws (Φ3 x L10).

Autres manuels pour 55EH5C

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Manuels Affichage numérique populaires d'autres marques

SMART-AVI

SMART-AVI SIGNAGEPRO Manuel utilisateur

KeyWest Technology

KeyWest Technology BREEZE Manuel utilisateur

XtendLan

XtendLan XL-DSP-183C Manuel utilisateur

Dynascan

Dynascan DS861LR4 Manuel utilisateur

Classic Exhibits

Classic Exhibits SEGUE DESIGNS MOD-1363 Manuel utilisateur

protech

protech KT-7290 Manuel utilisateur

WebDT

WebDT 515A Instructions de montage

Samsung

Samsung IWJ Series Manuel utilisateur

EVERI

EVERI Enrollment Kiosk Manuel utilisateur

NCR

NCR SelfServ 90 Manuel

ViewSonic

ViewSonic EP4602 Manuel utilisateur

ViewSonic

ViewSonic EP3202r Manuel utilisateur

Samsung

Samsung OM46N Manuel utilisateur

Viessmann

Viessmann 6336 Manuel utilisateur

Osram

Osram Traxon Manuel d'instructions d'installation

Philips

Philips Signage Solutions Series BDL4990VL Manuel utilisateur

ViewSonic

ViewSonic EP5012-L Manuel utilisateur

Philips

Philips CRD01/00 Manuel utilisateur