LG 43UH7N-E Manuel utilisateur
2
ENGLISH
TABLE OF CONTENTS
BASIC .............................................3
- Checking the Accessories ............................................3
- Learning the Buttons......................................................4
GETTING READY ...........................5
- Connecting the IR Sensors..........................................5
- Kensington Lock Device ................................................6
CHECKING BEFORE
INSTALLATION ..............................7
- Installation Orientation .................................................7
- Installation Location........................................................8
- Wall Mount Holder ..........................................................9
PRECAUTIONS FOR USE............ 10
- Dust.......................................................................................10
- Afterimage ........................................................................10
PRODUCT SPECIFICATIONS...... 12
LICENCE...................................... 18
3
ENGLISH
WARNING - This product is not intended for household use.
BASIC
NOTE
•The accessories provided with your product may vary depending on the model or region.
•Product specifications or contents in this manual may be changed without prior notice due to upgrade of product
functions.
•SuperSign Software & Manual
- Visit https://partner.lge.com to download the latest SuperSign software and manual.
Checking the Accessories
CABLE
MANAGEMENT
CABLE
MANAGEMENT
X 2
43/49/55/65UH7N-E
Depending on country
4
ENGLISH
Learning the Buttons
The illustrations may differ depending on the model.
Power On (Press)
Quick Menu (Press 1)
Menu Selection (Press 2)
Power Off 3 (Press and Hold)
Volume Control
Menu Control 2Menu Control 2
1 When the monitor is turned on, press the button one time.
2 You can use the function when you control menu.
3 All running apps will close.
Quick Menu
Turns the power off. Accesses the main menu.
Changes the input source. Close the quick menu.
5
ENGLISH
GETTING READY
Connecting the IR Sensors
Connecting the cable to the product allows it to receive signals from the remote control.
Rotate the IR sensor according to horizontal or vertical use.
- The illustrations may differ depending on the model.
- Remove the protective cable film before use.
Back
Front
Front
Back
Horizontal Use (Default Mount) Vertical Use
You can hide the IR sensor.
6
ENGLISH
Kensington Lock Device
(This feature applies only to some models.)
The Kensington lock device connector is located on the back of the monitor. For more information on installation and
use, refer to the user manual provided with the locking device.
Connect the Kensington security system cable between the monitor and a table.
NOTE
•The Kensington lock device is an optional specification.
•This is a general illustration of installation and may look different from the product held by the customer.
7
ENGLISH
CHECKING BEFORE INSTALLATION
We are not responsible for product damage caused by failure to follow the guide.
Installation Orientation
Using Vertically
When installing vertically, rotate the monitor 90 degrees anti-clockwise while facing the front of the screen.
Tilt Angle
30°
Ceiling, Floor Orientation
8
ENGLISH
Installation Location
We are not responsible for product damage caused by failure to follow the guide.
Indoor
Installing on a Wall
13 mm (0.5inches) (Slim Wall Mount, optional)
26 mm (1.0inches) (Normal Wall Mount, optional)
A
A
A : 13mm (0.5inches) or more
•The warranty will not cover any damage
caused by using the product in direct sunlight
on the front panel.
•Leave sufficient space around the product so
that the ventilation vents of the product are
not blocked.
Installing on a Recessed Wall
A
A
A : 13mm (0.5inches) or more
B : 50mm (1.9inches) or more
C : 70mm (2.7inches) or more
•The warranty will not cover any damage
caused by using the product in direct sunlight
on the front panel.
Outdoor
Outdoor Enclosed
9
ENGLISH
Wall Mount Holder
To install the monitor on a wall, attach a wall mount holder (optional) to the back of the monitor.
Take caution, and ensure that the wall mount holder (optional) is securely fixed to the monitor and to the wall.
The VESA dimensions of the wall mount by model are as follows.
C
A
D
E
B
A B C
D
(mm (inches))
EE
Length (Maximum)
(mm (inches))
43UH5N-E
43UH7N-E LSW240* 200 x 200
(7.8 x 7.8) M6 14
(0.5)
49UH5N-E
49UH7N-E
OLW480* 300 x 300
(11.8 x 11.8) M6 14
(0.5)
55UH5N-E
55UH7N-E
65UH5N-E
65UH7N-E
C
A
D
B
A B C
(mm (inches))
DD
Length (Maximum)
(mm (inches))
43UH5N-E
43UH7N-E WB21LM* 200
(7.8) M6 14
(0.5)
49UH5N-E
49UH7N-E
WB21LM* 300
(11.8) M6 14
(0.5)
55UH5N-E
55UH7N-E
65UH5N-E
65UH7N-E
CAUTION
•Disconnect the power cord first, and then move or install the monitor. Otherwise, it may result in electric shock.
•If the monitor is installed on a ceiling or inclined wall, it may fall and result in injury.
•Damage to the monitor by tightening the screws too tightly may void your warranty.
•Use screws and wall mount plates conforming to VESA standards. Breakage or personal injury due to use or misuse
of inappropriate components is not covered by the warranty of this product.
NOTE
•Using screws longer than the indicated depth may damage the inside of the product. Be sure to use the proper length.
•For more information on installation, please refer to the user manual for the wall mount.
10
ENGLISH
PRECAUTIONS FOR USE
Dust
The warranty will not cover any damage caused by using the product in an excessively dusty environment.
Afterimage
•After-image appears when the product is turned off.
- Pixels may be damaged rapidly if a still image is displayed on the screen for a long period of time. Use the screen-
saver function.
- Switching from a screen with high differences in luminance (black and white or grey) to a darker screen may cause
an afterimage. This is normal due to the display characteristics of this product.
•When the LCD screen is in a still pattern for extended periods of use, a slight voltage difference may occur between
the electrodes that operate the liquid crystal (LC). The voltage difference between the electrodes increases over time
and tends to keep the liquid crystal aligned in one direction. At this time, the previous image remains, which is called
an afterimage.
•Afterimages do not occur when continuously changing images are used but take place when a certain screen is fixed
for a long time. The following are operational recommendations for reducing the occurrence of afterimages when
using a fixed screen. The maximum recommended time for switching the screen is 12 hours. Shorter cycles are better
for preventing afterimages.
Ce manuel convient aux modèles suivants
7
Table des matières
Autres manuels LG Affichage numérique
LG
LG 86UH5E Manuel utilisateur
LG
LG 55LV77D Manuel utilisateur
LG
LG 49VM5C Manuel utilisateur
LG
LG 8LG55UH5CBAEK Manuel utilisateur
LG
LG 49SH7E Manuel utilisateur
LG
LG 49UH5B Manuel utilisateur
LG
LG 86XF3SK-B.AEU Manuel utilisateur
LG
LG 43SE3KB Guide de démarrage rapide
LG
LG LSAB012-M1 Manuel utilisateur
LG
LG 32SM5D Guide de démarrage rapide
LG
LG 49XF2B-B Manuel utilisateur
LG
LG 98UH5J Manuel utilisateur
LG
LG 75UH5C Manuel utilisateur
LG
LG 86UH5F-H Manuel utilisateur
LG
LG 65SE3D Manuel utilisateur
LG
LG 75UM3DG Manuel utilisateur
LG
LG 43UL3G Manuel utilisateur
LG
LG 49VH7C Guide de démarrage rapide
LG
LG 55EF5E-L Manuel utilisateur
LG
LG 65UH5PC Manuel utilisateur
Manuels Affichage numérique populaires d'autres marques
SMART-AVI
SMART-AVI SIGNAGEPRO Manuel utilisateur
KeyWest Technology
KeyWest Technology BREEZE Manuel utilisateur
XtendLan
XtendLan XL-DSP-183C Manuel utilisateur
Dynascan
Dynascan DS861LR4 Manuel utilisateur
Classic Exhibits
Classic Exhibits SEGUE DESIGNS MOD-1363 Manuel utilisateur
protech
protech KT-7290 Manuel utilisateur
