Lexus Navigation System SC430 Manuel utilisateur

SECTION 1

BASIC FUNCTIONS

Basic information before operation

DDisplay operation 20. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

DTouch switch operation 21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

DInputting letters and numbers 21. . . . . . . . . . . . . . . . . . . . . . . . . . . .

DCurrent position display 23. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

DScreen scroll operation (one−touch scroll) 24. . . . . . . . . . . . . . . . .

DMap scale 27. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

DOrientation of the map 28. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

DLimitations of the navigation system 28. . . . . . . . . . . . . . . . . . . . . .

DMap database information and updates 31. . . . . . . . . . . . . . . . . . .

BASIC FUNCTIONS

Display operation

Push the “OPEN” or “CLOSE” button to

open or close the screen cover and turn

the system on or off. Pushing the

“MAP/VOICE”, “DESTINATION”,

“MENU” or “INFO” button can also

open the cover and turn the system on.

While you are using the navigation system,

turning the engine switch to the “LOCK”

position will turn off the system and close

the cover automatically. After this, if you

turn the engine switch back to the “ACC” or

“ON” position, the cover will be automati-

cally opened and the system will turn on

the previous mode you used.

If the screen cover is stopped in the middle

of the door opening (closing) operation,

push the “CLOSE (OPEN)” button once

and then push the “OPEN (CLOSE)” but-

ton again.

Your navigation system works when the

engine switch is in the “ACC” or “ON” posi-

tion.

CAUTION

Take care not to jam your hand while

opening/closing the screen cover.

Otherwise you could be injured.

NOTICE

Do not obstruct the screen cover

while it is opening/closing. It could

damage your navigation system.

When the display is hard to be read due

to the lights from your surroundings,

the display can be tilted. It is recom-

mended to tilt the display in position

3 when the retractable hardtop is

opened. If the display is in position 1 ,

each push of the “TILT” button will tilt

the display to position 2 , 3 and

then back to 1 in this order.

The display will automatically resume

the previous position you used when

the engine switch is turned to “ACC” or

“ON” position.

CAUTION

Take care not to jam your hand while

tilting the display. Otherwise, you

could be injured.

NOTICE

Do not obstruct the display while it is

tilting. It could damage your naviga-

tion system.

BASIC FUNCTIONS

Touch switch operation

This system is operated mainly by the

switches on the screen. To prevent

damage to the screen, lightly touch

switches on the screen with your finger.

When you touch a switch on the screen,

a beep sounds.

Do not use objects other than your fin-

ger to touch the screen.

INFORMATION

DIf the system does not respond to

a touch of a switch, move your fin-

ger away from the screen and then

touch it again.

DYou cannot operate dimmed

switches.

DWipe off fingerprints on the sur-

face of the display using a glass

cleaning cloth. Do not use chemi-

cal cleaners to clean the touch

screen.

DThe displayed image may become

darker and moving images may be

slightly distorted when the display

is cold.

DUnder extremely cold conditions,

the map may not be displayed and

the data input by a user may be de-

leted. Also, the touch−screen but-

tons may be harder than usual to

depress.

DWhen you look at the screen

through polarised material such as

polarised sunglasses, the screen

may be dark and hard to see. If so,

change the angle of the screen,

look at the screen from different

angles, adjust the screen settings

on the “Display” screen, or take off

your sunglasses.

When searching for an address or a name,

or entering a memo, you can input letters

and numbers via the touch screen.

DTo input letters

To display the alphabet keys, touch the

“A−Z” switch or the “À−Ý”switch.

Enter letters by touching the alphabet keys

directly.

:Touching this switch erases one

letter. Holding this switch will

continue to erase letters.

Inputting letters and

numbers

BASIC FUNCTIONS

DTo input numerals and symbols

To display the number keys and symbol

keys, touch the “0−9” switch.

Enter numerals and symbols by touching

the number keys and symbol keys directly.

:Touching this switch erases one

letter. Holding this switch will

continue to erase letters.

:Touching this switch displays

other symbols.

DTo display the list

To search for an address or a name, touch

the “List” switch. Matching items from

the database are listed even if the entered

address or name is incomplete.

If the number of matches is four or less, the

list is displayed without touching the

“List” switch.

INFORMATION

The number of matching items is

shown to the right side of the screen.

If the number of matching items is

more than 9,999, the system displays

“∗∗∗∗” on the screen.

BASIC FUNCTIONS

DList screen operation

When a list is displayed, you can scroll or

page through the list by using the appropri-

ate switch.

To shift to the next or previous

page.

To scroll up or down one item at a

time.

This expresses a displayed

screen position.

If appears to the right of the

item name, the complete name is

too long for the display. Touch

to scroll to the end of the name.

Touch to scroll to the

beginning of the name.

Current position display

When starting the navigation system, the

current position is displayed first.

This screen displays the current vehicle

position and a map of the surrounding local

area.

The current vehicle position mark appears

in the center or bottom center of the map

screen. You can return to this map screen

showing your current position at any time

from any screen by touching the “MAP/

VOICE” button.

During driving, the current vehicle position

mark is fixed in the screen and the map

moves.

The current position is automatically set as

your vehicle receives signals from the

GPS (Global Positioning System). If your

current position is not correct, it is automat-

ically corrected after your vehicle receives

signals from the GPS.

INFORMATION

DAfter the battery disconnection, or

on a new vehicle, the current posi-

tion may not be correct. As soon

as the system receives signals

from the GPS, the correct current

position is displayed.

DTo correct the current position

manually, see page 119.

BASIC FUNCTIONS

Touch any point on the map and that

point moves to the center of the screen

and is shown by the cursor mark.

If you wish to look at a point on the map

which is different to your current vehicle

position, you can bring the desired point to

the center of the screen by using the scroll

feature.

If you continue to hold your finger on the

screen, the map will continue scrolling in

that direction until you lift your finger.

After you scroll the screen, the map re-

mains centered at the selected location

until you activate another function. The

current vehicle position mark will continue

to move along your actual route and may

move off the screen. When you touch the

“MAP/VOICE” button, the current ve-

hicle position mark returns to the center of

the screen and the map moves as you pro-

ceed along the designated route.

INFORMATION

When you use the one−touch scroll

feature, the current vehicle position

mark may disappear from the screen.

Move the map with a one−touch scroll

again or push the “MAP/VOICE”

button to return to the current vehicle

position map location display.

DTo set the cursor position as a des-

tination

You can set a specific point on the map as

a destination using the one−touch scroll

function.

Touch the “Enter ”switch.

The screen changes and displays the

map location of the selected destina-

tion and the route preference. (See “ —

Entering destination” on page 71.)

If there is already a preset destination,

touch the “Add to ”switch or the

“Replace ”switch.

When there is already a preset destination,

using the “Add to ”switch to set an

additional destination, will set the new one

as the first point of arrival.

Screen scroll operation

(one−touch scroll)

BASIC FUNCTIONS

DTo register the cursor position as a

memory point

Memory point registration enables easy

access to a specific point.

Touch the “Mark” switch.

When you touch the “Mark” switch, the

following screen appears for a few sec-

onds, and then the map screen returns.

The registered point is shown by on the

map.

To change the icon or name, etc., see page

108.

You can register up to 106 memory points.

If you attempt to register more than 106, a

message appears for confirmation.

BASIC FUNCTIONS

DTo see information about the icon

where the cursor is set

To display information about an icon, set

the cursor on it.

POI INFORMATION

When the cursor is set on a POI icon, the

name and “Info.” switch are displayed

on the top of the screen.

Touch the “Info.” switch.

1U017a

Information such as the name, address,

and phone number are displayed.

If you touch the “Enter ”switch, the

position of cursor is set as a destination.

If there is already a preset destination, the

“Add to ”switch and the “Replace

”switch are displayed.

When there is already a preset destination,

using the “Add to ”switch to set an

additional destination, will set the new one

as the first point of arrival.

To register this POI as a memory point,

touch the “Mark” switch. (For details,

see page 106.)

INFORMATION

The desired Point of Interest can be

displayed on the map screen. (For

details, see page 85.)

BASIC FUNCTIONS

MEMORY POINT INFORMATION

When the cursor is set on a memory point

icon, the name and “Info.” switch are

displayed on the top of screen.

Touch the “Info.” switch.

1U018a

Information such as the name, location,

and phone number are displayed.

If you touch the “Enter ”switch, the

position of cursor is set as a destination.

If there is already a set destination, the

“Add to ”switch and the “Replace

”switch are displayed.

When there is already a preset destination,

using the “Add to ”switch to set an

additional destination, will set the new one

as the first point of arrival.

To edit a memory point, touch the “Edit”

switch. (For details, see page 108.)

Touch the or switch to change

the scale of the map display. The scale bar

and indicator at the bottom of the screen

indicates the map scale menu. The scale

ranges 150 feet (50 m) to 250 miles (400

km).

Touch the or switch until the

scale bar changes normally. If you contin-

ue to touch on the switch, the scale bar

changes smoothly.

You can change the scale of the map dis-

play by touching the scale bar directly. It is

not available during driving.

The map scale is displayed under the

north−up symbol or heading−up symbol at

the top left of the screen.

INFORMATION

When the map scale is at the maxi-

mum range of 250 miles (400 km),

is not shown. When the map

scale is at the minimum range of 150

feet (50 m), is not shown. How-

ever, in the area where the foot print

map is contained, when the map

scale is changed to 150 feet (50 m),

the switch changes to the

switch.

Map scale

BASIC FUNCTIONS

Orientation of the map

You can change the orientation of the

map from North−up to Heading−up by

touching the orientation symbol at the

top left of the screen.

Touch or .

North−up screen

Heading−up screen

North−up symbol

Regardless of the direction of vehicle trav-

el, North is always up.

Heading−up symbol

The direction of vehicle travel is always up.

A red arrow indicates North.

This navigation system calculates the

current vehicle position using satellite

signals, various vehicle signals, map

data, etc. However, the accurate posi-

tion may not be shown depending on

the satellite condition, road configura-

tion, vehicle condition or other circum-

stances.

The Global Positioning System (GPS) de-

veloped and operated by the U.S. Depart-

ment of Defense provides an accurate cur-

rent vehicle position, normally using 4 or

more satellites, and in some cases 3 satel-

lites. The GPS system has a certain level

of inaccuracy. While the navigation sys-

tem will compensate for this most of the

time, occasional positioning errors of up to

300 feet (100 m) can and should be expec-

ted. Generally, position errors will be cor-

rected within a few seconds.

Limitations of the navigation

system

Autres manuels pour Navigation System SC430

Table des matières

Autres manuels Lexus Automobile

Lexus

Lexus RX450h Manuel utilisateur

Lexus

Lexus 2014 RX 350 Manuel utilisateur

Lexus

Lexus GS 450h 2006 Manuel utilisateur

Lexus

Lexus GS300 1998 Manuel utilisateur

Lexus

Lexus LS600hl Manuel utilisateur

Lexus

Lexus 2015 NX 200t Manuel utilisateur

Lexus

Lexus 2015 LX 570 Manuel utilisateur

Lexus

Lexus RX350/270 Manuel utilisateur

Lexus

Lexus GS 350 Manuel utilisateur

Lexus

Lexus RX 400h MHU33 Series Manuel utilisateur

Lexus

Lexus GS 350 Instructions d'utilisation et d'installation

Lexus

Lexus RX 350 2010 Manuel utilisateur

Lexus

Lexus RX 350 Manuel utilisateur

Lexus

Lexus ES350 Manuel utilisateur

Lexus

Lexus RX450h Manuel utilisateur

Lexus

Lexus GX 460 2021 Manuel utilisateur

Lexus

Lexus LS 460 Manuel utilisateur

Lexus

Lexus HS250h Hybrid 2010 Manuel utilisateur

Lexus

Lexus NX 300h Manuel utilisateur

Lexus

Lexus RC350 Manuel utilisateur

Lexus

Lexus 2015 ES 300h Manuel utilisateur

Lexus

Lexus UX 250h 2020 Manuel utilisateur

Lexus

Lexus 2015 IS 250C Manuel utilisateur

Lexus

Lexus LFA Manuel utilisateur

Manuels Automobile populaires d'autres marques

Toyota

Toyota 2000 Tundra Manuel utilisateur

CITROËN

CITROËN DS4 DSign Manuel utilisateur

Cadillac

Cadillac CTS 2008 Manuel utilisateur

Mercedes-Benz

Mercedes-Benz M-class ML 55 AMG Manuel utilisateur

Porsche

Porsche Boxster S Manuel utilisateur

GMC

GMC 2010 Savana 1500 Cargo Manuel utilisateur

KIAM

KIAM SPORTAGE 2014 Manuel de la liste des pièces

GMC

GMC 2013 Terrain Instructions de montage

GMC

GMC T-Series 1999 Manuel utilisateur

Mercury

Mercury 1998 Mystique Manuel utilisateur

Mercury

Mercury 2007 Mariner Manuel utilisateur

Mazda

Mazda 2007 Mazdaspeed 3 Mode d’emploi

Mazda

Mazda 2014 CX-5 Manuel utilisateur

GMC

GMC Chevrolet Express 2022 Manuel utilisateur

GMC

GMC 1997 Jimmy Manuel utilisateur

Chevrolet

Chevrolet 2012 Malibu Manuel utilisateur

Cadillac

Cadillac 2010 Escalade Manuel utilisateur

Skoda

Skoda FABIA RS - ANNEXE 118 Manuel utilisateur