Lexmark Z52 Manuel utilisateur
Lexmark Z52
Color Jetprinter
User’s Guide for Windows 95 and Windows 98
Edition: December 1999
The following paragraph does not apply to any country where such provisions are inconsistent with local law:
LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF
ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not
allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply to you.
This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the
information herein; these changes will be incorporated in later editions. Improvements or changes in the products or the
programs described may be made at any time.
References in this publication to products, programs, or services do not imply that the manufacturer intends to make
these available in all countries in which it operates. Any reference to a product, program, or service is not intended to
state or imply that only that product, program, or service may be used. Any functionally equivalent product, program, or
service that does not infringe any existing intellectual property right may be used instead. Evaluation and verification of
operation in conjunction with other products, programs, or services, except those expressly designated by the
manufacturer, are the user’s responsibility.
Lexmark, Lexmark with diamond design, and ColorFine are trademarks of Lexmark International, Inc., registered in the
United States and/or other countries. Color Jetprinter is a trademark of Lexmark International, Inc.
Other trademarks are the property of their respective owners.
© Copyright 1999 Lexmark International, Inc. All rights reserved.
UNITED STATES GOVERNMENT RESTRICTED RIGHTS
This software and documentation are provided with RESTRICTED RIGHTS. Use, duplication or disclosure by the
Government is subject to restrictions as set forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and
Computer Software clause at DFARS 252.227-7013 and in applicable FAR provisions: Lexmark International, Inc.,
Lexington, KY 40550.
Contents
Contents
iii
•
•
•
•
•
Contents
Steps to basic printing 1
Step One: Load the paper 2
Step Two: Customize the Printer Properties 5
Step Three: Print your document 8
Printing beyond the basics 9
Printing on both sides of a sheet of paper 9
Printing handouts 12
Printing booklets 15
Printing posters 18
Maintaining your printer 21
Using the Control Program 21
Installing or replacing print cartridges 22
Improving print quality 23
Troubleshooting 27
Printer prints slowly or doesn’t print 28
Paper misfeeds or jams 30
Document prints with mistakes or poor quality 31
Problems with transparencies, photos, envelopes... 33
Error messages and flashing lights 34
Appendix 35
Installing printer software 35
Uninstalling printer software 36
Printing from DOS 36
Steps to basic printing
Steps to basic printing
•
•
•
•
•
1
1
Steps to basic printing
This book describes how to use your printer on Windows 95
and Windows 98. For help using your printer with:
•
Windows NT 4.0 or Windows 2000, refer to the User’s
Guide button on the Printer Software CD for Windows.
•
Macintosh OS 8.6 or higher, refer to the User’s Guide icon
found in the desktop Lexmark Z52 folder.
Basic printing is as easy as:
1Load the paper (see the next section)
2Customize the Printer Properties (see page 5)
3Print your document (see page 8)
•
•
•
•
•
Chapter 1
2
Step One: Load the paper
You can load up to 100 sheets of paper (depending on thickness).
1Place the paper against the right side of the sheet feeder, with
the print side facing you.
2Squeeze the release tab and the paper guide together and
slide the paper guide to the edge of the paper.
Sheet feeder
Paper alignment marks
Release tab
Paper guide
Steps to basic printing
•
•
•
•
•
Steps to basic printing
3
Loading specialty papers
Follow these guidelines when loading specialty papers:
Load up to: Make sure:
10 envelopes • the print side is facing you.
• the envelopes are loaded vertically
against the right side of the sheet
feeder and the paper guide is
against the edge of the envelopes.
• The stamp location is in the upper
left corner.
10 greeting cards, index
cards, postcards, or photo
cards
• the print side is facing you.
• the cards are loaded vertically against the right side of the
sheet feeder and the paper guide is against the edge of the
cards.
25 sheets of photo paper • the print side is facing you.
• the paper guide is against the edge of the paper.
20 sheets of banner paper • you place the paper behind
the printer. Bring the
unattached edge of the first
page over the printer, and into
the sheet feeder.
• the paper guide is against the
edge of the paper.
Note
: Select Banner or Banner A4 paper size in the
Printer Properties.
10 transparencies • the rough side of the transparency is facing you (smooth
side down).
• the paper guide is against the edge of the transparencies.
•
•
•
•
•
Chapter 1
4
up to 100 sheets of custom-
sized paper
• the print side is facing you and the paper guide is against
the side of the paper.
• your paper size fits within these dimensions:
-Width dimensions:
76 mm to 216 mm
3.0” to 8.5”
-Length dimensions:
127 mm to 432 mm
5.0” to 17.0”
25 iron-on transfers • you load the iron-on transfers following the instructions on
the package.
• the paper guide is against the side of the iron-on transfers.
Load up to: Make sure:
Steps to basic printing
•
•
•
•
•
Steps to basic printing
5
Step Two: Customize the Printer Properties
Your printer software includes several applications that let
you easily perform printing tasks. One of these applications is
called Printer Properties.
The Printer Properties application include four tabs: Job
Finishing, Paper, Document/Quality, and Advanced. Each tab
contains settings relating to the operation of your printer and
its software.
Opening the Printer Properties
You can open the Printer Properties from almost every
application. This lets you change printer settings ONLY for the
document(s) you are currently creating in the application. To
open the Printer Properties from an application:
1Open the application’s File menu.
2Choose Print (or Printer) Setup.
3In the Printer Setup dialog box, click the Properties,
Option, or Setup button (depending on the application).
4Change settings as needed.
When you open the Printer Properties from Windows, the
settings apply to ALL documents, unless you change them
from the application. To open the Printer Properties from
Windows:
1From the Start menu, select Settings, and then select
Printers.
2From the Printers folder, right-click the printer icon for
your printer.
3Select Properties from the sidebar menu.
•
•
•
•
•
Chapter 1
6
Click the...
Job Finishing tab
to print:
• Handouts
•Posters
• Booklets
•Two-sided
documents
Paper tab to:
• Select a paper size and orientation
• Set the number of copies to print
• Reverse the printing order of your
document pages. The first page of
your document will be on top of the
stack in the paper exit tray.
• Collate your document
Advanced tab
to adjust:
• Halftone
settings
•Image
settings
Document/Quality tab to select:
• Color settings for the document type
you are printing
• The paper type you are using
• A print quality setting
• Web Smoothing when you are
printing from the internet
• Allow Pages to Dry
• The default settings
Autres manuels pour Z52
3
Table des matières
Autres manuels Lexmark Imprimante
Lexmark
Lexmark 15L0000 - Z 705 Photo Jetprinter Color Inkjet... Manuel utilisateur
Lexmark
Lexmark 34S0309 - E 260dtn B/W Laser Printer Manuel utilisateur
Lexmark
Lexmark 1500 Series Manuel utilisateur
Lexmark
Lexmark 44J0000 - J 110 Color Inkjet Printer Guide d'installation
Lexmark
Lexmark 20G0100 - T 640 B/W Laser Printer Manuel utilisateur
Lexmark
Lexmark 5400 Series Manuel utilisateur
Lexmark
Lexmark 522n - C Color Laser Printer Manuel utilisateur
Lexmark
Lexmark 810 Series Manuel utilisateur
Lexmark
Lexmark M1145 Manuel utilisateur
Lexmark
Lexmark M5100 Series Instructions d'installation
Lexmark
Lexmark MS810 Series Manuel
Lexmark
Lexmark XM7163 Manuel utilisateur
Lexmark
Lexmark C925de Manuel utilisateur
Lexmark
Lexmark MS81x Manuel utilisateur
Lexmark
Lexmark Z2420 Instructions d'installation et d'entretien
Lexmark
Lexmark MX6500e 6500e Manuel d'utilisation et d'entretien
Lexmark
Lexmark T420 Manuel utilisateur
Lexmark
Lexmark 1400 Series Manuel utilisateur
Lexmark
Lexmark SERIES E460DN Manuel utilisateur
Lexmark
Lexmark Optra S 1255 Manuel utilisateur
