Leviton 73A00-3ZB Instructions de montage

WIRELESS 30A LOAD CONTROL MODULE

Cat. No. 73A00-3ZB

Installation Instructions and User’s Guide

INSTALLATION ENGLISH

DI-021-ZI733-00AAR2253

DESCRIPTION

The Model 73A00-3ZB Wireless 30A Load Control Module (LCM) can be used to

control water heaters, pool pumps, outdoor fountains, lighting, and much more.

ENROLLING THE 73A00-3ZB LCM TO ZIGBEE NETWORK

Conﬁrm that the LCM is currently not enrolled in the network (i.e. blinking 1/Second at

50% On). If the LCM is enrolled in the network, disband LCM.

1) Place the supplied magnet on LCM near the magnetic sensor until the LED

changes to blinking 7 times per second. This will require that the magnet be held at

this location for 5+ seconds.

2) Enroll the device using the ZigBee Interface Module (ZIM).

3) Verify device was enrolled properly by checking to see if the LED is blinking 1 time

a second at 10% On (Normal operation).

DISBANDING THE 73A00-3ZB LCM FROM ZIGBEE NETWORK

1) Conﬁrm LCM is currently in network (i.e. any LED state except blinking 1/Second

at 50% On).

2) Place magnet on LCM near magnetic sensor and hold at this location for 6-8

seconds.

3) Remove magnetic from magnetic sensor for 6-8 seconds.

4) Place magnetic on LCM near magnetic sensor and hold at this location for 6-8

seconds, until the LED changes to blinking 1/Second at 50% On.

5) Device is disbanded.

As per SIPCO LLC, this product may be used in a system and employs certain elements from one or

more of the following U.S. Patents: IP CO, LLC: 7,089,125; 7,054,271; 6,249,516; 6,044,062. SIPCO LLC:

7,103,511; 6,914,893; 6,891,838; 5,714,931; 6,233,327; 7,397,907; 6,618,578; 7,079,810; 7,295,128;

7,263,073; 7,480,501; 6,437,692; 7,468,661; 7,053,767; 7,650,425; 7,739,378

This device is intended for installation in accordance with the National Electrical

Code and local regulations. It is recommended that a qualiﬁed electrician perform

this installation. Retain these instructions for future reference.

This product is suitable for indoor or outdoor use.

BLACK / WHITE

100-250VAC, 50/60 Hz

POWER SUPPLY:

CONNECT TO "ALWAYS ON" CIRCUIT

POWER .35W STANDBY; .95W ACTIVE

ORANGE

SWITCHED CONTROL CIRCUIT

30A @ 240VAC GEN PURPOSE

2HP @ 240VAC

1HP @ 120VAC

THIS SIDE UP

LED INDICATOR

BLACK

WHITE

30A @ 28VDC GEN PURPOSE

USE APPROPRIATE SCREWS (NOT PROVIDED)

TO MOUNT UNIT, DO NOT OVER-TIGHTEN

FOR BEST RF PERFORMANCE, MOUNT TO NON-METALLIC

SURFACE, OR MOUNT WITH TOP OF UNIT 1.5 INCHES OR

MORE ABOVE METALLIC SURFACE

1.5" MIN

EXAMPLE

WARNINGS AND CAUTIONS

• TO AVOID FIRE, SHOCK, OR DEATH; TURN OFF POWER at circuit breaker or

fuse and test that power is off before wiring!

• If you are unsure about any part of these instructions, consult an electrician.

• SAVE THESE INSTRUCTIONS.

WARNINGS AND CAUTIONS

• To be installed and/or used in accordance with appropriate electrical codes and

regulations.

• Use this device with copper or copper-clad wire only.

• For indoor use only.

(73I00-3ZB)

WEB VERSION

www. .com information@itm.com1.800.561.8187

DI-021-ZI733-00AAR2253

STATUS RATE DESCRIPTION

OFF 0% On Device is malfunctioning or connected improperly, device has no power.

ON 100% On Device is currently in override mode, the load is turned off.

SHORT BLINK 1/Second 10% On Device is currently in network and not in override (operating normally).

LONG BLINK 1/Second 50% On Device is currently not in a Network.

QUICK BLINK 7/Second 50% On Device is currently trying to join network (sending beacons).

FAULT 2/Second 20% On Device is experiencing fault conditions.

LOCAL CONTROL

he 73A00-3ZB LCM can be controlled locally by placing the magnet near the magnetic

sensor momentarily to toggle the state (On/Off) of the controlled device.

LED STATUS INDICATOR

The LCM uses a status LED to indicate the current mode of operation. The states of

the LED are the following:

FOR CANADA ONLY

For warranty information and/or product returns, residents of Canada should contact Leviton in writing or by telephone.

This document and all its contents herein are subject to and protected by international copyright and other intellectual property rights and are the property of Leviton Manufacturing

Use herein of third party trademarks, service marks, trade names, brand names and/or product names are for informational purposes only, are/may be the trademarks of their

respective owners; such use is not meant to imply afﬁliation, sponsorship, or endorsement.

No part of this document may be reproduced, transmitted or transcribed without the express written permission of Leviton Manufacturing Co., Inc.

FCC COMPLIANCE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged

to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

LEVITON LIMITED WARRANTY

Leviton warrants to the original consumer purchaser and not for the beneﬁt of anyone else that products manufactured by Leviton under the Leviton brand name (“Product”) will be free

from defects in material and workmanship for the time periods indicated below, whichever is shorter: • OmniPro II and Lumina Pro: three (3) years from installation or 42 months from

manufacture date. • OmniLT, Omni IIe, and Lumina: two (2) years from installation or 30 months from manufacture date. • Thermostats, Accessories: two (2) years from installation or

30 months from manufacture date. • Batteries: Rechargeable batteries in products are warranted for ninety (90) days from date of purchase.Note: Primary (non-rechargeable) batteries

shipped in products are not warranted. Products with Windows®Operating Systems: During the warranty period, Leviton will restore corrupted operating systems to factory default

at no charge, provided that the product has been used as originally intended. Installation of non-Leviton software or modiﬁcation of the operating system voids this warranty. Leviton’s

obligation under this Limited Warranty is limited to the repair or replacement, at Leviton’s option, of Product that fails due to defect in material or workmanship. Leviton reserves the

right to replace product under this Limited Warranty with new or remanufactured product. Leviton will not be responsible for labor costs of removal or reinstallation of Product.

The repaired or replaced product is then warranted under the terms of this Limited Warranty for the remainder of the Limited Warranty time period or ninety (90) days, whichever

is longer. This Limited Warranty does not cover PC-based software products. Leviton is not responsible for conditions or applications beyond Leviton’s control. Leviton is

not responsible for issues related to improper installation, including failure to follow written Installation and operation instructions, normal wear and tear, catastrophe,

fault or negligence of the user or other problems external to the Product. To view complete warranty and instructions for returning product, please visit us at www.leviton.com.

WEB VERSION

www. .com information@itm.com1.800.561.8187

Autres manuels Leviton Unité de contrôle

Leviton

Leviton CP series Manuel d'utilisation

Leviton

Leviton SGAMP Manuel utilisateur

Leviton

Leviton 10A11-1 Instructions de montage

Leviton

Leviton 73A00-3ZB Instructions de montage

Leviton

Leviton 73A00-4ZB Instructions de montage

Leviton

Leviton DHO Intellisense HXP15 Manuel utilisateur

Leviton

Leviton Decora Smart DW15A Series Manuel utilisateur

Leviton

Leviton Quantran QTM00-050 Manuel utilisateur

Leviton

Leviton 72A00-1 Instructions de montage

Leviton

Leviton DOS02 Manuel utilisateur

Leviton

Leviton 95A03-1 Instructions de montage

Leviton

Leviton 73A00-3ZB Instructions de montage

Leviton

Leviton LV200 Manuel utilisateur

Leviton

Leviton Decora Illumatech RTF01-10 Manuel utilisateur

Leviton

Leviton Vizia RF+ VRP15-1LW Manuel utilisateur

Leviton

Leviton GreenMAX RPM00-100 Manuel utilisateur

Leviton

Leviton 110A00-1 Instructions de montage

Leviton

Leviton SureSlide 6637 Manuel utilisateur

Leviton

Leviton Decora Illumatech Manuel utilisateur

Leviton

Leviton 73A00-4ZB Instructions de montage

Leviton

Leviton 73A00-4ZB Instructions de montage

Leviton

Leviton Verifeye 8000 Series Manuel utilisateur

Leviton

Leviton Opt-X SDX Series Manuel utilisateur

Leviton

Leviton VRCS4-1L Vizia RF + Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur