LevelOne VDS-0110 Manuel utilisateur

LevelOne

User Manual

VDS-0110 / VDS-0111

Ethernet over VDSL2 Converter (Sender)

Ethernet over VDSL2 Converter (Receiver)

V1.0

FCC Certifications

This Equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in

which case the user will be required to correct the interference at his own expense.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) this device may not cause harmful interference, and (2) this device must

accept any interference received; including interference that may cause undesired

operation.

CE Mark Warning

This equipment complies with the requirements relating to electromagnetic compatibility,

EN 55022 Class A for ITE, the essential protection requirement of Council Directive

89/336/EEC on the approximation of the laws of the Member States relating to

electromagnetic compatibility.

Company has an on-going policy of upgrading its products and it may be possible that

information in this document is not up-to-date. Please check with your local distributors for

the latest information. No part of this document can be copied or reproduced in any form

without written consent from the company.

Table of Content

1. INTRODUCTIONS................................................................................... 4

2. APPLICATION NOTES ........................................................................... 4

3. FEATURES ............................................................................................. 5

4. PACKING CONTENTS............................................................................ 5

5. LED INDICATORS .................................................................................. 6

6. DIP SWITCHES SETTINGS.................................................................... 7

7. DATA RATES & DISTANCES.................................................................. 9

8. TECHNICAL SUPPORT........................................................................ 10

1. Introductions

The VDS-0110 and VDS-0111, a line power pair of VDSL2 (Very high-bit-rate Digital

Subscriber Line) converter, provides a broadband transmission up to 100/60Mbps of

downstream/upstream data rate over single pair copper line for point-to-point Ethernet

connectivity. With 100/60Mbps data rate, VDS-0110/VDS-0111 supports transmission

distance up to 350 meters for line power connection. The line power is supplied from the

VDS-0110 to VDS-0111 and conforms to the Safety-Extra-Low-Voltage (SELV) standards.

With plug and play features and minimum installation time, VDS-0110 is always

configured as master mode for central side, and VDS-0111 as slave mode for remote side.

The VDS-0110/VDS-0111 conforms to the ITU-T G.993.1 and G.993.2 to meet

VDSL/VDSL2 and SG15Q4 DMT for network requirements. A pair of VDS-0110/VDS-0111

offers a cost effective line power solution for bandwidth-hungry applications such as

LAN-to-LAN connectivity, Video Streaming, FTTB, and MDU/MTU over single twisted pair

telephone line.

2. Application Notes

Ethernet to Ethernet Bridge Extension

Central Office

VDS-0110

Remote Side

VDS-0111

100 / 60 Mbps up to 350 meters

VDSL Link

3. Features

ITU-T G.993.1, G.993.2 VDSL/VDSL2 and SG15Q4 DMT Compliance

100/60Mbps DownSream/UpStream for distance up to 350 meters

Supports Line Powered VDSL2 connection

Conforms Safety-Extra-Low-Voltage (SELV) standard

RJ11 for DSL interfaces + RJ45 for Ethernet LAN port

5 LED Indicators for VDS-0110(Master)

4 LED indicators for VDS-0111(Slave)

4 Dip Switches for Configuration Settings

Trellis Coding support up to 1024 Discrete Multi-Tone (DMT) bins

Auto MDIX for 10/100 BaseT Ethernet LAN Ports

Low-Latency for Video/Voice/Data applications

Line Surge Protection

Selectable Fast and Interleaved modes

Fast mode guarantees a minimum end to end latency less than 1 ms.

Interleaved mode provides impulse noises protection for any impulse noise with a

duration less than 250 us. Interleaved mode has a maximum end to end latency of

10 ms. Interleaved mode is the default mode.

Selectable fixed data rate and fixed SNR margin

User may select fixed SNR margin (9 dB) or fixed target data rate.

When fixed SNR margin is selected, the systems will maintain the SNR margin at

9 dB across all available loop length.

When fixed target data rate is selected, the system will lock the data rate at

50/20Mbps whenever the calculated SNR margin is higher than 9 dB. This will

result in the best system stability and is the default mode.

4. Packing Contents

Inside the package you should find:

VDSL2 Converter

Power Adaptor (DC12V/2.5A) for VDS-0110

User’s Manual CD

Telephone line

Please check if the packing is damaged or any component is missing. If so, please contact

your distributor.

5. LED Indicators

On the front panel of VDS-0110/VDS-0111, there are 5 LED indicators as the following

VDS-0110 Front Panel

VDS-0111 Front Panel

VDS-0110 Rear Panel/ VDS-0111 not Power Jack

POWER

Green On

Indicates power is on and normal

LAN1

Green On

Indicates Ethernet LAN1 port is in connection

Flashing

Indicates Ethernet LAN1 data activities

LAN2

Green On

Indicates Ethernet LAN1 port is in connection

Flashing

Indicates Ethernet LAN1 data activities

Master

Green On

Indicates VDS-0110 is always set as Master (VTU-C)

mode.

Slave

Green On

Indicates VDS-0111 is always set as Slave (VTU-R)

mode.

Green On

Indicates VDS-0110 is providing line power to

VDS-0111.

OFF

Indicates VDS-0110 line power is OFF.

6. Dip Switches Settings

Pin 1

Pin 2

Pin 3

Pin 4

VTU-C/R

Mode

Rate Limit

SNR

OFF

VTU-C

Interleaved

50/20 Mbps

9dB

VTU-R

Fast

Full Rate

6dB

Pin 1: VTU-C/R Switch

VTU-C: The VDS-0110 converter will act as at the Central Office (CO) side.

VTU-R: The VDS-0111 converter will act as at the Customer Premise Equipment (CPE) or

Remote side.

Pin 2: Mode for impulse noise protection

Interleave mode: Protection for up to 250ms impulse noises with latency less than 6 ms.

Fast mode: Direct data transmission with latency less than 1ms.

Pin 3: Rate limit control

50/20 Mbps: Line rate limited to 50/20 Mbps.

Full Rate: Provides up to 100Mbps/60Mbps line rate in short line.

Pin 4: Signal to Noise Ratio (SNR)

9dB: Higher SNR margin (9dB) will result in less error with more stable VDSL2 link.

6dB: Original and Normal channel noise protection with 6 dB SNR.

7. Data Rates & Distances

Performance in AWG 26 Line at 6dB with full rate

Down Stream Data Rate (Mbps)

Up Stream Data Rate (Mbps)

Distance (feet)

100

500

1000

1250

8. Technical Support

Thank you for selecting LevelOne products. LeveOne’s website contains the latest user

documentation and soft-ware updates for LevelOne products.

Please contact LevelOne Technical Support through our website.

World Wide Web

http://www.level1.com

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels LevelOne Convertisseur de média

LevelOne

LevelOne IEC-1800 Manuel utilisateur

LevelOne

LevelOne FVT-5001 Manuel utilisateur

LevelOne

LevelOne VDS-0130 PD Manuel utilisateur

LevelOne

LevelOne VDS-0120 PSE Manuel utilisateur

LevelOne

LevelOne FVT-0103TXFC Manuel utilisateur

LevelOne

LevelOne GVT-2000 Manuel utilisateur

LevelOne

LevelOne Infinity IEC-1020 Manuel utilisateur

LevelOne

LevelOne GVM-1101 Manuel utilisateur

LevelOne

LevelOne POI-2001 Manuel utilisateur

LevelOne

LevelOne Infinity IEC-1400 Manuel utilisateur

LevelOne

LevelOne FVT-6001 Manuel utilisateur

LevelOne

LevelOne VDS-1201 Manuel utilisateur

LevelOne

LevelOne POS-4000 Manuel utilisateur

LevelOne

LevelOne Infinity IEC-2001 Manuel utilisateur

LevelOne

LevelOne Infinity IEC-1240 Manuel utilisateur

LevelOne

LevelOne VDS-0202 BNC Manuel utilisateur

LevelOne

LevelOne FVT-1101 Manuel utilisateur

LevelOne

LevelOne FVT-2202 Manuel utilisateur

LevelOne

LevelOne FVT-2001 Manuel utilisateur

LevelOne

LevelOne POS-4001 Manuel utilisateur

LevelOne

LevelOne FVT-2002 Manuel utilisateur

LevelOne

LevelOne DSS-1000 Manuel utilisateur

LevelOne

LevelOne VDS-1201 Manuel de l'opérateur

LevelOne

LevelOne IEC-4000 Manuel utilisateur

Manuels Convertisseur de média populaires d'autres marques

SoundTraxx

SoundTraxx Blunami BLU-2200 Manuel utilisateur

SPROLINK

SPROLINK VA1 Manuel utilisateur

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manuel utilisateur

Nikon

Nikon AF-S TC-20E III Manuel utilisateur

Axis

Axis AXIS Q7406 Manuel utilisateur

Omega

Omega TAC80B-J Manuel utilisateur

Zoom

Zoom Thunderbolt TAC-2R Manuel utilisateur

OST

OST iConverter 10/100M Manuel utilisateur

Vertiv

Vertiv Netsure Manuel utilisateur

birddog

birddog MINI Manuel utilisateur

Roland

Roland GI-10 Manuel utilisateur

Wallenstein

Wallenstein WX310 Manuel utilisateur

Pace

Pace MSS 200-1 Manuel utilisateur

Solar Converters

Solar Converters EQ 12/24-50 Manuel utilisateur

CYP

CYP EL-7400V Manuel utilisateur

TIE

TIE MIDI 1i1o Manuel utilisateur

DCS

DCS Vivaldi Upsampler Manuel utilisateur

Westermo

Westermo MCW-211 SERIES Manuel utilisateur