LevelOne IEC-4000 Manuel utilisateur
IEC-4000
Industrial Fast Ethernet mini Media Converter
10/100Mbps RJ-45 Copper to 100Mbps SFP Fibre
Quick Installation Guide
v1.00 - 1402
IEC-4000 Page 1
Overview
LevelOne IEC-4000 is an industrial Fast Ethernet media
converter with a rugged aluminium case which providing superb
heat dissipation. This converter is designed to be mounted on
an industrial standard DIN-rail, plus the clearly visible status
LEDs provide simple monitoring of port link activity. It also
features Link Fault Pass Through in order to alert remote
location when link status changes.
High Reliability
All components are built to withstand harsh environment
applications without compromise where humidity, temperature
variation and even shock vibration are concerns, including
Electric & Utility, Critical Infrastructure, Transportation and
Surveillance Security. This device operates under -40 to 75
Celsius (-40 to 167 Fahrenheit) temperature.
Ultra-Compact
The ultra-compact converter has the smallest form-factor of any
such device in the world, but still offers industrial levels of
toughness. Housed in a rugged IP31 aluminium case with in-
built surge and ESD protection, the device measures just
59mm by 49mm, with a height of 36mm.
IEC-4000 Page 2
Features
10/100BaseT to 100Base-FX
Rugged aluminium case design in a ultra-compact form
factor
18V-36VAC & 12V-60VDC with polarity protection
Link Fault Pass through (LFP) function
Supports switch and pure converter mode
Surge & ESD protection
Maximum noise & interference immunity
-40°C to 75°C (-40°F to 167°F) operating temperature range
DIN-Rail or panel mount installation
Package Contents
Industrial mini Media Converter
Quick Installation Guide
DIN-rail & Panel mount kits
IEC-4000 Page 3
LED Status
LED
Status
Description
PWR
Steady
Power On
Off
Power Off
LK/Act
Steady
Fibre link established
Flashing
Transmitting or Receiving data
10/100Base-TX
Green
Steady
Network connection established
Flashing
Transmitting or Receiving data
Amber
Steady
100M speed is established
Off
10M speed is established
IEC-4000 Page 4
Power Input
Terminal Block
V+
18 –36VAC
12 –60VDC
V–
Neutral Ground
Earth Ground
Note:
This unit provides 3 pin terminal-block. And it can be operated
using either VAC or VDC power source. The VDC power range
is from 12VDC to 60VDC, and the VAC power range is from
18VAC to 36VAC. Always Make sure your input voltage is
within this supported voltage range.
WARNING –any exceeded input voltage will not make this unit
function and may damage this unit.
To make power connection –Follow the printed polarity for V+,
V- and Ground. Connect positive wire to V+, connect negative
wire to V-, and also connect neutral wire to ground.
IEC-4000 Page 5
DIP Switch
DIP2
DIP1
ON
LFP enabled
Converter Mode
OFF
LFP disabled
(default)
Switch Mode
(default)
Note:
This unit is equipped with dip switches, located on the front
panel marked as SW1. Adjusting the dip switches will change
the default function of this unit. This unit has set to
manufacturer default as: switch mode and LFP function off.
The table shown as you may change the dip switch setting to
your desired environment.
IEC-4000 Page 6
DIN Rail Mount
Assembly: Place the switch on the DIN rail from above using
the slot. Push the front of the switch toward the mounting
surface until it audibly snaps into place
Start-up: Connect the supply voltage to start up the switch
via the terminal block (or DC JACK)
Dismantling: Pull out the lower edge and then remove the
switch from the DIN rail
IEC-4000 Page 7
SFP Transceiver (Optional)
The IEC-4000 SFP slot supports pluggable modules (100Base-
X only) that enabling you to choose from a variety of
transceivers
Model No.
Description
Industrial
SFP-2100
125M MMF SFP Transceiver (2km, 850nm, -20 to 85C)
SFP-2200
125M MMF SFP Transceiver (2km, 1310nm, -40 to 85C)
SFP-2230
125M SMF SFP Transceiver (30km, 1310nm, -40 to 85C)
SFP-2260
125M SMF SFP Transceiver (60km, 1310nm, -40 to 85C)
SFP-2280
125M SMF SFP Transceiver (80km, 1310nm, -40 to 85C)
SFP-2300
125M SMF SFP Transceiver (20km, 1550nm, -40 to 85C)
SFP-2310
125M SMF SFP Transceiver (100km, 1550nm, -40 to
85C)
SFP-2320
125M SMF SFP Transceiver (120km, 1550nm, -40 to
85C)
Comm
ercial
SFP-1101
155M MMF SFP Transceiver (2km, 1310nm, 0 to 70C)
SFP-1311
155M SMF SFP Transceiver (20km, 1310nm, 0 to 70C)
IEC-4000 Page 8
SFP-1411
155M SMF SFP Transceiver (40km, 1310nm, 0 to 70C)
Table des matières
Autres manuels LevelOne Convertisseur de média
LevelOne
LevelOne DSS-1000 Manuel utilisateur
LevelOne
LevelOne FVT-0103TXFC Manuel utilisateur
LevelOne
LevelOne GVT-2010 Manuel utilisateur
LevelOne
LevelOne VDS-0200 Manuel
LevelOne
LevelOne FVT-2001 Manuel utilisateur
LevelOne
LevelOne IEC-1420 Manuel utilisateur
LevelOne
LevelOne POS-4000 Manuel utilisateur
LevelOne
LevelOne FVT-2000 Manuel utilisateur
LevelOne
LevelOne Infinity IEC-2000 Manuel utilisateur
LevelOne
LevelOne FVT-2202 Manuel utilisateur
LevelOne
LevelOne IEC-1220 Manuel utilisateur
LevelOne
LevelOne GVT-2000 Manuel utilisateur
LevelOne
LevelOne FVT-2001 Manuel utilisateur
LevelOne
LevelOne FVT-2002 Manuel utilisateur
LevelOne
LevelOne POI-2001 Manuel utilisateur
LevelOne
LevelOne IEC-1300 Manuel utilisateur
LevelOne
LevelOne FVM-1101 Manuel utilisateur
LevelOne
LevelOne Infinity IEC-1020 Manuel utilisateur
LevelOne
LevelOne FVT-5001 Manuel utilisateur
LevelOne
LevelOne Infinity IEC-1400 Manuel utilisateur
