Letscom ST-BE30 Manuel utilisateur
Wireless Earbuds
ST-BE30
User Manual
Thank you for purchasing our products. This manual addresses the
safety guidelines, warranty and operating instructions. Please review
this manual thoroughly before operating your device.
SM-LC-EJ-ST-BE30-V2
Rotate the jet black cover of the
charging case to open/close.
- 1 -
●Wireless earbuds × 1 pair (left and right)
●Charging case × 1
●Eartips × 3 pairs (large, medium, small)
●USB-C charging cable × 1
●User manual × 1
At a Glance
Charging Case
MFB button
(multi-function button)
LED indicator
Microphone
USB-C charging port
Package Contents
Left Earbud
(Main Earbud)
Right Earbud
Replaceable eartips
Charging contacts
L
R
LED indicator
● Power on: LED indicators flash blue 5 times
● Power off: LED indicators stay red for 2 seconds and go off
● Pairing mode (using both earbuds): LED indicator on the left earbud
flashes red and blue alternately
● Pairing mode (using only one earbud): LED indicator on the earbud
flashes red and blue alternately
● Connected to a Bluetooth device: LED indicators flash blue once
every 6 seconds
● Disconnected: LED indicator on the left earbud flashes red and blue
alternately
● Earbuds are being charged: LED indicators stay red
● Earbuds are fully charged: LED indicators turn blue and are off in 1
minute
● Low battery: LED indicators flash red twice and blue once every 4
seconds and a voice reminder prompts
Charging case is being charged
● 1-25% battery: the 4 indicators flash alternatively
● 25%-50% battery: the leftmost indicator stays on, and the rest 3
indicators flash alternatively
● 50%-75% battery: the left 2 indicators stay on, and the right 2
indicators flash alternatively
● 75%-100% battery: the left 3 indicators stay on, and the rightmost
indicator flashes
● Fully charged: the 4 indicators stay on
- 2 -
Earbud LED Indicator Guide
Charging Case LED Indicator Guide
(with earbuds in the case)
Charging case is not being charged
● 1-25% battery: the leftmost indicator stays on
● 25%-50% battery: the left 2 indicators stay on
● 50%-75% battery: the left 3 indicators stay on
● 75%-100% battery: the 4 indicators stay on
● Low battery: the leftmost indicator flashes
Note：
Indicators will be off in 1 minute.
- 3 -
Insert the earbud into your ear and rotate to fit comfortably. Ensure the
microphone is pointing towards your mouth.
Wearing the Earbuds
When you use the earbuds for the first time, remove the insulating
films on the charging contacts of the earbuds.
● Charge the earbuds
1) Align the charging contacts on the right earbud with the charging
pins on the right side of the case.
2) Repeat step 1 and to charge the left earbud.
3) When the earbuds LED indicators stay red, close the case.
- 4 -
Using the Earbuds
● Charge the charging case
1) Plug the small end of the USB-C cable into the USB-C port of the
charging case.
2) Plug the other end into a USB wall charger or computer (DC 5V)
that is powered on.
Notes:
● It takes approx. 1 hour to fully recharge the earbuds.
● The earbuds and the charging case charge simultaneously. The
charging case can be used as a standalone charger.
● When the charging case is out of power, you put the earbuds back
into the case and close the case, the earbuds will not turn off
automatically. Turn off the earbuds manually.
● When the charging case is out of power, the earbuds will not turn on
automatically the time you take them out. Turn on the earbuds
manually.
● Power on/off
Power on
● The earbuds are automatically on when you take them out of the
charging case.
● Press and hold the MFB buttons on both earbuds for 4 seconds
to turn on.
- 5 -
Note：
When you use the earbuds for the first time, remove the
insulating films on the charging contacts of the earbuds, and turn
on the earbuds by pressing and holding the MFB buttons on both
earbuds for 4 seconds.
Power off
● The earbuds are automatically off when you put them back into
the charging case.
● Press and hold the MFB buttons for 6 seconds to turn them off
(when both earbuds are paired with your phone, press and hold
the MFB button on either left or right earbud, the other earbud
will be off at the same time).
Note：
When the earbuds are being charged in the charging case and
the charging case is out of power, the earbuds will turn on
automatically. If the Bluetooth of your Bluetooth device
connected to the earbuds before is on and device is within
pairable range, earbuds will connected to your device
automatically; if the Bluetooth of your Bluetooth device
connected to the earbuds before is off or device is not within
pairable range, earbuds will be off in 5 minutes.
● Pair
Pair both earbuds (Pair use)
1) Make sure the earbuds and your phone or other Bluetooth devices
are next to each other (within 3 feet, no obstacles between).
2) Turn on the Bluetooth of your phone or other Bluetooth devices.
3) Turn on the earbuds (when they are in shutdown state) and the
earbuds enter pairing mode (LED indicator on the left earbud
flashes red and blue alternately).
4) In the list of found Bluetooth devices in your phone or other
Bluetooth devices, choose "ST-BE30-L" to pair.
- 6 -
- 7-
5) Enter "0000" if your phone or Bluetooth device asks you to enter a
code to pair.
ST-BE30-L
100%9:41 AM
ST-BE30-L
Notes:
● The earbuds will directly enter pairing mode the first time you turn
them on.
● The earbuds will connect to the last paired Bluetooth device
automatically when they are turned on. Please turn on the Bluetooth
of your Bluetooth device before turning on the earbuds.
● If pairing failed, turn off the earbuds first and then press and hold the
MFB button of the left earbud until the indicator on the left earbud
flashes red and blue alternately and earbud enters pairing mode.
Choose "ST-BE30-L" in your phone to pair and turn on the right
earbud.
● When both earbuds are connected to your phone, if you put the right
earbud back to the charging case, you can use the left earbud alone
without interruption; but if you put the left earbud back to the
charging case, the right earbud is also disconnected to your phone
and you have to pair the right earbud with your phone again to use
the right earbud alone.
● When the earbuds are on but not paired with your phone or other
Bluetooth devices, they will exit the pairing mode and be
automatically off in 5 minutes.
Pair ONE earbud (Mono Use)
You can use both earbuds simultaneously or use either of the two
earbuds alone.
1) Make sure the earbud and your phone or other Bluetooth devices
are next to each other (within 3 feet, no obstacles between).
2) Turn on the Bluetooth of your phone or other Bluetooth devices.
3) Take the earbud out of the charging case.
4) Turn off the earbud by pressing and holding the MFB button for 6
seconds.
5) Press and hold the MFB button on the earbud until the indicator
flashes red and blue alternately and earbud enters pairing mode.
6) In the list of found Bluetooth devices in your phone or other
Bluetooth devices, choose "ST-BE30-L" if you use the left earbud or
"ST-BE30-R" if you use the right earbud to pair.
Note:
When the left/right earbud is connected to your phone and you take
the other earbud out of the charging case, earbuds will pair with each
other and then link back to your phone automatically (in the condition
that you have paired both earbuds with your phone before) .
● Play/pause playing songs
Press the MFB button to pause and press the MFB button again to
resume playing songs.
● Last/Next song
Press and hold the MFB button on the left/right earbud for 3
seconds until you hear a "Do" sound to skip to the last/next song.
- 8 -
● Volume
Press the MFB button on the left/right earbud twice to
decrease/increase the volume.
● Answer/hang up/reject calls
● Press the MFB button or operate on your phone to answer an
incoming call.
● Press the MFB button or operate on your phone to hang up an
ongoing call.
● Press and hold the MFB button for 3 seconds to reject an
incoming call.
Note:
To make/answer calls using ST-BE30 erabuds, choose "ST-BE30-L"
as "Audio" route on your phone when you are making/answering
calls.
● Reset the earbuds/clear all pairing information on the
earbuds
Turn off the earbuds and press and hold the MFB buttons for 14
seconds until the indicators on earbuds flash red and blue
alternatively and then go off.
- 9 -
Table des matières
Autres manuels Letscom Casque audio
