Leica Nova MS60 Manuel utilisateur

Leica MS60/TS60

User Manual

Version 2.0

English

MS60/TS60, Introduction 2

Introduction

Purchase Congratulations on the purchase of a MS60/TS60 series instrument.

This manual contains important safety directions as well as instructions for setting up

the product and operating it. Refer to "1 Safety Directions" for further information.

Read carefully through the User Manual before you switch on the product.

Product

Identification

The model and serial number of your product are indicated on the type plate.

Always refer to this information when you need to contact your agency or Leica

Geosystems authorised service workshop.

Trademarks • Windows is a registered trademark of Microsoft Corporation in the United States

and other countries

•

Bluetooth

®is a registered trademark of Bluetooth SIG, Inc.

• SD Logo is a trademark of SD-3C, LLC.

All other trademarks are the property of their respective owners.

Validity of this

Manual

This manual applies to all MS60/TS60 instruments. Where there are differences

between the various models they are clearly described.

Available

Documentation

Refer to the following resources for all MS60/TS60 documentation/software:

• the Leica USB documentation card

• https://myworld.leica-geosystems.com

Video tutorials are available on:

http://www.leica-geosystems.com/captivate-howto

Name Description/Format

MS60/TS60

Quick Guide

Provides an overview of the product together with tech-

nical data and safety directions. Intended as a quick

reference guide.



MS60/TS60

User Manual

All instructions required in order to operate the product

to a basic level are contained in this User Manual.

Provides an overview of the system together with tech-

nical data and safety directions.

-

Name Description/Format

Captivate

Technical

Reference

Manual

Overall comprehensive guide to the product and applica-

tion functions. Included are detailed descriptions of

special software/hardware settings and software/hard-

ware functions intended for technical specialists.

-

MS60/TS60, Introduction 3

myWorld@Leica Geosystems (https://myworld.leica-geosystems.com) offers a

wide range of services, information and training material.

With direct access to myWorld, you are able to access all relevant services whenever

it is convenient for you, 24 hours a day, 7 days per week. This increases your efficiency

and keeps you and your equipment instantly updated with the latest information from

Leica Geosystems.

Service Description

myProducts Add all products that you and your company own and explore your

world of Leica Geosystems: View detailed information on your prod-

ucts and update your products with the latest software and keep up-

to-date with the latest documentation.

myService View the current service status and full service history of your prod-

ucts in Leica Geosystems service centres. Access detailed informa-

tion on the services performed and download your latest calibration

certificates and service reports.

mySupport View the current service status and full service history of your prod-

ucts in Leica Geosystems service centres. Access detailed informa-

tion on the services performed and download your latest calibration

certificates and service reports.

myTraining Enhance your product knowledge with Leica Geosystems Campus -

Information, Knowledge, Training. Study the latest online training

material on your products and register for seminars or courses in

your country.

myTrusted

Services

Add your subscriptions and manage users for Leica Geosystems

Trusted Services, the secure software services, that assist you to

optimise your workflow and increase your efficiency.

MS60/TS60, Table of Contents 4

Table of Contents

In this manual Chapter Page

1SafetyDirections 6

1.1 General Introduction 6

1.2 Definition of Use 7

1.3 Limits of Use 7

1.4 Responsibilities 7

1.5 Hazards of Use 8

1.6 Laser Classification 10

1.6.1 General 10

1.6.2 Distancer, Measurements with Reflectors 10

1.6.3 Distancer, Measurements without Reflectors 11

1.6.4 Red Laser Pointer 13

1.6.5 Autofocus Capability of Telescope Camera 15

1.6.6 Automatic Target Aiming (ATRplus) 16

1.6.7 PowerSearch PS 17

1.6.8 Electronic Guide Light EGL 18

1.6.9 Laser Plummet 19

1.7 Electromagnetic Compatibility EMC 20

1.8 FCC Statement, Applicable in U.S. 21

2 Description of the System 23

2.1 System Components 23

2.2 System Concept 26

2.2.1 Software Concept 26

2.2.2 Power Concept 27

2.2.3 Data Storage Concept 27

2.3 Container Contents 28

2.4 Instrument Components 32

3UserInterface 35

3.1 Keyboard 35

3.2 Operating Principles 37

3.3 Autofocus Capability of Telescope Camera 37

4Operation 38

4.1 Setting Up the TS Instrument 38

4.2 Setting Up SmartStation 39

4.3 Setting Up SmartPole 40

4.4 Setting up for Remote Control (with the RadioHandle) 40

4.5 Setting up for Remote Control (with the TCPS29/30) 41

4.6 Fixing the Field Controller to a Holder and Pole 42

4.7 Fixing the CS35 Tablet to a Holder and Pole 43

4.8 Connecting to a Personal Computer 45

4.9 Power Functions 48

4.10 Batteries 49

4.10.1 Operating Principles 49

4.10.2 Battery for the TS Instrument 49

4.11 Working with the Memory Device 50

4.12 LED Indicators 51

4.13 Guidelines for Correct Results 52

MS60/TS60, Table of Contents 5

5Check&Adjust 54

5.1 Overview 54

5.2 Preparation 55

5.3 Combined Adjustment

(l, t, i, c, ATRplus and Telescope Camera) 56

5.4 Tilting Axis Adjustment (a) 58

5.5 Adjusting the Circular Level of the Instrument and Tribrach 60

5.6 Adjusting the Circular Level of the Prism Pole 61

5.7 Inspecting the Laser Plummet of the Instrument 61

5.8 Servicing the Tripod 62

6 Care and Transport 63

6.1 Transport 63

6.2 Storage 63

6.3 Cleaning and Drying 64

6.4 Maintenance 64

7TechnicalData 65

7.1 Angle Measurement 65

7.2 Distance Measurement with Reflectors 65

7.3 Distance Measurement without Reflectors 67

7.4 Distance Measurement - Long Range (LO mode) 68

7.5 Automatic Target Aiming (ATRplus) 69

7.6 Scanning 71

7.7 PowerSearch PS 72

7.8 Overview Camera 72

7.9 Telescope Camera 73

7.10 SmartStation 74

7.10.1 SmartStation Accuracy 74

7.10.2 SmartStation Dimensions 75

7.11 Conformity to National Regulations 76

7.11.1 MS60/TS60 76

7.11.2 RadioHandle 77

7.11.3 Dangerous Goods Regulations 77

7.12 General Technical Data of the Instrument 78

7.13 Scale Correction 83

7.14 Reduction Formulas 86

8 Software Licence Agreement 88

MS60/TS60, Safety Directions 6

1SafetyDirections

1.1 General Introduction

Description The following directions enable the person responsible for the product, and the

person who actually uses the equipment, to anticipate and avoid operational hazards.

The person responsible for the product must ensure that all users understand these

directions and adhere to them.

About Warning

Messages

Warning messages are an essential part of the safety concept of the instrument. They

appear wherever hazards or hazardous situations can occur.

Warning messages...

• make the user alert about direct and indirect hazards concerning the use of the

product.

• contain general rules of behaviour.

For the users‘ safety, all safety instructions and safety messages shall be strictly

observed and followed! Therefore, the manual must always be available to all persons

performing any tasks described here.

DANGER, WARNING, CAUTION and NOTICE are standardised signal words for iden-

tifying levels of hazards and risks related to personal injury and property damage. For

your safety, it is important to read and fully understand the following table with the

different signal words and their definitions! Supplementary safety information

symbols may be placed within a warning message as well as supplementary text.

Type Description

DANGER Indicates an imminently hazardous situation which, if not

avoided, will result in death or serious injury.

WARNING Indicates a potentially hazardous situation or an unintended

use which, if not avoided, could result in death or serious injury.

CAUTION Indicates a potentially hazardous situation or an unintended

use which, if not avoided, may result in minor or moderate

injury.

NOTICE Indicates a potentially hazardous situation or an unintended

use which, if not avoided, may result in appreciable material,

financial and environmental damage.

Important paragraphs which must be adhered to in practice as

they enable the product to be used in a technically correct and

efficient manner.

MS60/TS60, Safety Directions 7

1.2 Definition of Use

Intended Use • Measuring horizontal and vertical angles.

• Measuring distances.

• Recording measurements.

• Capturing and recording images.

• Automatic target search, recognition and following.

•Visualisingtheaimingdirection and vertical axis.

• Remote control of product.

• Data communication with external appliances.

• Measuring raw data and computing coordinates using carrier phase and code signal

from GNSS satellites.

• Recording GNSS and point related data.

• Computing with software.

Reasonably

Foreseeable Misuse

• Use of the product without instruction.

• Use outside of the intended use and limits.

• Disabling safety systems.

• Removal of hazard notices.

• Opening the product using tools, for example screwdriver, unless this is permitted

for certain functions.

• Modification or conversion of the product.

• Use after misappropriation.

• Use of products with obvious damages or defects.

• Use with accessories from other manufacturers without the prior explicit approval

of Leica Geosystems.

• Inadequate safeguards at the working site.

• Aiming directly into the sun.

1.3 Limits of Use

Environment Suitable for use in an atmosphere appropriate for permanent human habitation: not

suitable for use in aggressive or explosive environments.

DANGER Local safety authorities and safety experts must be contacted before working in

hazardous areas, or close to electrical installations or similar situations by the person

in charge of the product.

1.4 Responsibilities

Manufacturer of

the product

Leica Geosystems AG, CH-9435 Heerbrugg, hereinafter referred to as Leica Geosys-

tems, is responsible for supplying the product, including the user manual and original

accessories, in a safe condition.

Person responsible

for the product

The person responsible for the product has the following duties:

• To understand the safety instructions on the product and the instructions in the

user manual.

• To ensure that it is used in accordance with the instructions.

• To be familiar with local regulations relating to safety and accident prevention.

• To inform Leica Geosystems immediately if the product and the application

becomes unsafe.

• To ensure that the national laws, regulations and conditions for the operation of

e.g. radio transmitters or lasers are respected.

MS60/TS60, Safety Directions 8

1.5 Hazards of Use

CAUTION Watch out for erroneous measurement results if the product has been dropped or has

been misused, modified, stored for long periods or transported.

Precautions:

Periodically carry out test measurements and perform the field adjustments indicated

in the user manual, particularly after the product has been subjected to abnormal use

as well as before and after important measurements.

DANGER Because of the risk of electrocution, it is dangerous to use poles, levelling staffs and

extensions in the vicinity of electrical installations such as power cables or electrical

railways.

Precautions:

Keep at a safe distance from electrical installations. If it is essential to work in this

environment, first contact the safety authorities responsible for the electrical instal-

lations and follow their instructions.

NOTICE With the remote control of products, it is possible that extraneous targets will be

picked out and measured.

Precautions:

When measuring in remote control mode, always check your results for plausibility.

CAUTION Be careful when pointing the product towards the sun, because the telescope func-

tions as a magnifying glass and can injure your eyes and/or cause damage inside the

product.

Precautions:

Do not point the product directly at the sun.

WARNING During dynamic applications, for example stakeout procedures there is a danger of

accidents occurring if the user does not pay attention to the environmental conditions

around, for example obstacles, excavations or traffic.

Precautions:

The person responsible for the product must make all users fully aware of the existing

dangers.

WARNING Inadequate securing of the working site can lead to dangerous situations, for example

in traffic, on building sites and at industrial installations.

Precautions:

Always ensure that the working site is adequately secured. Adhere to the regulations

governing safety, accident prevention and road traffic.

CAUTION If the accessories used with the product are not properly secured and the product is

subjected to mechanical shock, for example blows or falling, the product may be

damaged or people can sustain injury.

Precautions:

When setting-up the product, make sure that the accessories are correctly adapted,

fitted, secured, and locked in position.

Avoid subjecting the product to mechanical stress.

MS60/TS60, Safety Directions 9

WARNING If the product is used with accessories, for example masts, staffs, poles, you may

increase the risk of being struck by lightning.

Precautions:

Do not use the product in a thunderstorm.

CAUTION During the transport, shipping or disposal of batteries it is possible for inappropriate

mechanical influences to constitute a fire hazard.

Precautions:

Before shipping the product or disposing of it, discharge the batteries by running the

product until they are flat.

When transporting or shipping batteries, the person in charge of the product must

ensure that the applicable national and international rules and regulations are

observed. Before transportation or shipping contact your local passenger or freight

transport company.

WARNING High mechanical stress, high ambient temperatures or immersion into fluids can cause

leakage, fire or explosions of the batteries.

Precautions:

Protect the batteries from mechanical influences and high ambient temperatures. Do

not drop or immerse batteries into fluids.

WARNING If battery terminals are short circuited e.g. by coming in contact with jewellery, keys,

metalized paper or other metals, the battery can overheat and cause injury or fire, for

example by storing or transporting in pockets.

Precautions:

Make sure that the battery terminals do not come into contact with metallic objects.

WARNING If the product is improperly disposed of, the following can happen:

• If polymer parts are burnt, poisonous gases are produced which may impair health.

• If batteries are damaged or are heated strongly, they can explode and cause

poisoning, burning, corrosion or environmental contamination.

• By disposing of the product irresponsibly you may enable unauthorised persons to

use it in contravention of the regulations, exposing themselves and third parties to

the risk of severe injury and rendering the environment liable to contamination.

Precautions:

Product-specific treatment and waste management information can be downloaded

from the Leica Geosystems home page at http://www.leica-

geosystems.com/treatment or received from your Leica Geosystems distributor.

WARNING Only Leica Geosystems authorised service workshops are entitled to repair these prod-

ucts.

The product must not be disposed with household waste.

Dispose of the product appropriately in accordance with the national

regulations in force in your country.

Always prevent access to the product by unauthorised personnel.

MS60/TS60, Safety Directions 10

1.6 Laser Classification

1.6.1 General

General The following chapters provide instructions and training information about laser safety

according to international standard IEC 60825-1 (2014-05) and technical report IEC TR

60825-14 (2004-02). The information enables the person responsible for the product

and the person who actually uses the equipment, to anticipate and avoid operational

hazards.

1.6.2 Distancer, Measurements with Reflectors

General The EDM module built into the product produces a visible laser beam which emerges

from the telescope objective.

The product described in this section is classified as laser class 1 in accordance with:

• IEC 60825-1 (2014-05): "Safety of laser products"

These products are safe under reasonably foreseeable conditions of operation and are

not harmful to the eyes provided that the products are used and maintained in accord-

ance with this User Manual.

According to IEC TR 60825-14 (2004-02), products classified as laser class 1,

class 2 and class 3R do not require:

• laser safety officer involvement,

• protective clothes and eyewear,

• special warning signs in the laser working area

if used and operated as defined in this User Manual due to the low eye hazard

level.

National laws and local regulations could impose more stringent instructions

for the safe use of lasers than IEC 60825-1 (2014-05) and IEC TR 60825-14

(2004-02).

Description Value

TS60 MS60

Wavelength 658 nm 658 nm

Maximum average radiant power 0.33 mW 0.33 mW

Pulse duration 800 ps 700 ps

Pulse repetition frequency (PRF) 100 MHz 1.1 MHz

Beam divergance 1.5 mrad x 3 mrad 1.5 mrad x 3 mrad

a) Laser beam

008673_001

Autres manuels pour Nova MS60

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Leica Instrument de mesure

Leica

Leica Disto D510 Manuel utilisateur

Leica

Leica DISTO D3a BT Manuel utilisateur

Leica

Leica Viva Series Manuel utilisateur

Leica

Leica APO-SUMMICRON-SL Manuel utilisateur

Leica

Leica TS02 Manuel utilisateur

Leica

Leica Disto E7100i Manuel utilisateur

Leica

Leica Roteo 20HV Manuel utilisateur

Leica

Leica 3D Disto Manuel utilisateur

Leica

Leica iCON gps 60 Manuel utilisateur

Leica

Leica LASER ALIGNMENT DIGICAT 100 Manuel utilisateur

Leica

Leica Lino L2P5 Guide de dépannage

Leica

Leica FlexLine plus Manuel utilisateur

Leica

Leica DD Series Manuel utilisateur

Leica

Leica Disto E7100i Manuel utilisateur

Leica

Leica RANGEMASTER CRF 1200 Manuel d'instructions

Leica

Leica DISTO D2 Manuel utilisateur

Leica

Leica Rod Eye 160 Manuel utilisateur

Leica

Leica Rod Eye 180 Manuel utilisateur

Leica

Leica Rangemaster CRF 1600 Manuel utilisateur

Leica

Leica Jogger 20 Manuel utilisateur

Leica

Leica iCON iCR70 Manuel utilisateur

Leica

Leica GPS900 Series Manuel utilisateur

Leica

Leica NA520 Manuel utilisateur

Leica

Leica Rangemaster CRF 1000 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur