Leica FlexLine Manuel utilisateur
/
Leica FlexLine/
FlexLine plus
Mining Application
Version 3.0
English
FlexLine/FlexLine plus, 2
Introduction
Introduction
To use equipment in the permitted manner, please refer to the detailed safety
instructions in the FlexLine/FlexLine plus User Manual.
Symbols The symbols used in this manual have the following meanings:
Type Description
)Important paragraphs which must be adhered to in practice
as they enable the product to be used in a technically
correct and efficient manner.
- Press the function button F1 to F4.
Navigation keys.
F1
F4
Table of Contents FlexLine/FlexLine plus, 3
Table of Contents
In this manual Chapter Page
1 Tolerances 5
1.1 Defining Tolerances 5
1.2 Selecting Tolerance Profiles 7
1.3 Mining PIN (Personal Identification Number) 8
2 Peg Survey 9
2.1 Overview 9
2.2 Starting Peg Survey 11
2.3 Measuring Peg Survey 15
2.4 Peg Survey Results 19
3LinePeg 22
4 Grades 23
4.1 Overview 23
4.2 Starting Grades 25
4.3 Gradeline Marking 27
4.4 Grade Results 30
5 Offset 32
5.1 Overview 32
Tolerances FlexLine/FlexLine plus, 5
1 Tolerances
1.1 Defining Tolerances
Description Before use of the mining applications, tolerance profiles have to be defined and
selected. The definition of tolerances can be done either via the Mining Data Manager
software or manually on the instrument. This chapter describes defining and
selecting tolerances manually. Refer to "6 Mining Data Manager" for details on using
the Mining Data Manager software.
Access 1. Select Programs from the Main Menu.
2. Select Tolerances from the Programs menu.
3. Enter the current PIN.
4. Press Cont to proceed to the tolerance profile screen.
)If a wrong PIN has been typed in 5 times, a Personal Unblocking code (PUK) is
required, which can be found on the instrument delivery papers. If the entered PUK
code is correct, then the PIN code is reset to default value "123456".
FlexLine/FlexLine plus, 6
Tolerances
Define tolerances
step-by-step Step Description
1. Select the tolerance profile. Primary, Secondary or Tertiary.
2. Enter the limits for horizontal direction, horizontal distance and height.
3. Select the preferred sequence B’F’F’’B’’, B’F’B’’F’’, or B’B’’F’F’’, and
number of sets.
)B = Backsight point. F = Foresight point.
4. Repeat steps 1 to 3 for each of the three tolerance profiles.
5. Set the defined tolerances by pressing Cont.
Tolerances FlexLine/FlexLine plus, 7
1.2 Selecting Tolerance Profiles
Select tolerances
step-by-step
)• Tolerances themselves can be changed by using the PIN-protected Define
Tolerance application. Refer to "1.1 Defining Tolerances".
• If a tolerance was uploaded by the Mining Data Manager software, this tolerance
will appear as "Uploaded" and cannot be changed on the instrument.
Step Description
1. Start a mining application.
2. Select Tolerances.
3. Select Select Tolerances.
4. Select either a Primary, Secondary or Tertiary tolerance profile to be
applied.
5. Press Cont to set the selected profile.
6. Press:
Accept to accept the profile in the tolerances summary screen.
OR
Reject to reject the profile and return to the define tolerance profile
screen.
FlexLine/FlexLine plus, 8
Tolerances
1.3 Mining PIN (Personal Identification Number)
Description The definition of tolerances, EDM and communication settings, is PIN protected to
prevent unauthorised changes. The Mining PIN is definable by the user. If a wrong PIN
has been typed in 5 times, a Personal Unblocking code (PUK) is required, which can
be found on the instrument delivery papers. If the entered PUK code is correct, then
the Mining PIN code is reset to default value "123456".
Set PIN code step-
by-step
)The default Mining PIN is "123456".
Step Description
1. Select Tools from the Main Menu.
2. Change to page 4/4 for Black&White display or to page Mining for
Color&Touch display.
3. Select MiningPIN.
4. Enter the current Mining PIN in PIN-Code:.
5. Press Cont.
6. Enter a personal Mining PIN Code (max. 6 characters numeric) in New PIN-
Code:.
7. Accept with Cont.
Peg Survey FlexLine/FlexLine plus, 9
2 Peg Survey
2.1 Overview
Description The application Peg Survey is used:
• to establish a forward peg (point).
• to control the intermediate horizontal angle between backsight and foresight
points.
• to check the horizontal distances and heights of the backsight and foresight
points.
• to compute the coordinates of the foresight point.
Users can measure several sets in different sequences. The quality of measurement
is controlled by the tolerances which are set before starting Peg Survey.
P0 Station
P1 Backsight point
P2 Foresight point
h1 Height of the reflector
h2 Height of the instrument
d1 Distance to backsight point
d2 Distance to foresight point
HZ1 Horizontal direction to backsight
point
HZ2 Horizontal direction to foresight point
P0
P1
P2
d1
h1- h2+
h1-
Hz1
TSOX_Mining_001
Hz2 d2
FlexLine/FlexLine plus, 10
Peg Survey
Known
• Coordinates of station
• Coordinates of backsight point
Unknown
• Coordinates of foresight point
Autres manuels pour FlexLine
1
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Leica Instrument de mesure
Leica
Leica Lino L2 Manuel utilisateur
Leica
Leica Viva TS16 Manuel utilisateur
Leica
Leica Rugby 55 Manuel utilisateur
Leica
Leica iCON iCR70 Manuel utilisateur
Leica
Leica CS20 Manuel utilisateur
Leica
Leica Jogger 20 Manuel utilisateur
Leica
Leica GS50 Manuel utilisateur
Leica
Leica DISTO D410 Manuel utilisateur
Leica
Leica Lino P5 Manuel utilisateur
Leica
Leica iCB50 Manuel utilisateur
Leica
Leica Disto E7100i Manuel utilisateur
Leica
Leica Lino L2P5 Manuel utilisateur
Leica
Leica GPS System 500 Manuel utilisateur
Leica
Leica 3D Disto Manuel utilisateur
Leica
Leica LS10 Manuel utilisateur
Leica
Leica PIPER 100 Manuel utilisateur
Leica
Leica RANGEMASTER CRF 1600-B Manuel utilisateur
Leica
Leica Roteo 20HV Manuel utilisateur
Leica
Leica NA520 Manuel utilisateur
Leica
Leica MOJO RTK Guide de l'administrateur
Manuels Instrument de mesure populaires d'autres marques
Endress+Hauser
Endress+Hauser Proline Promag 50 Caractéristiques techniques
Siemens
Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces
KLINGER
KLINGER CMF V Series Manuel utilisateur
EXFO
EXFO FTB-2 Manuel d'exploitation et d'entretien
Keysight
Keysight M8290A Manuel utilisateur
ADTEK
ADTEK MW-5 Manuel utilisateur