Leica DS2000 Manuel utilisateur

Leica DS2000

User Manual

Version 1.0

English

Leica DM2000, Introduction 2

Introduction

Purchase Congratulations on the purchase of the Leica DS2000.

This manual contains important safety directions as well as instructions for setting up

the product and operating it. Refer to "1 Safety Directions" for further information.

Read carefully through the User Manual before you switch on the product.

Product Identifica-

tion

The model and serial number of your product are indicated on the type plate.

Always refer to this information when you need to contact your agency or Leica

Geosystems authorised service centre.

Validity of this

manual

This manual applies to both versions of the DS2000 (two-wheeled or four-wheeled).

Differences between the versions are marked and described.

Trademarks • Windows is a registered trademark of Microsoft Corporation in the United States

and other countries

• Google is a registered trademark of Google Inc.

All other trademarks are the property of their respective owners.

Available

documentation

Refer to the following resources for all DS2000 documentation/software:

• the Leica USB stick

• https://myworld.leica-geosystems.com

Leica Geosystems

Address Book

On the last page of this manual, you can find the address of Leica Geosystems head-

quarters. For a list of regional contacts, please visit

http://leica-geosystems.com/contact-us/sales_support.

Name Description/Format

DS2000 User

Manual

All instructions required in order to operate the product

to a basic level are contained in the User Manual.

Provides an overview of the product together with tech-

nical data and safety directions.

-

Leica DM2000, Introduction 3

myWorld@Leica Geosystems (https://myworld.leica-geosystems.com) offers a

wide range of services, information and training material.

With direct access to myWorld, you are able to access all relevant services whenever

it is convenient for you, 24 hours a day, 7 days per week. This increases your efficiency

and keeps you and your equipment instantly updated with the latest information from

Leica Geosystems.

Service Description

myProducts Add all products that you and your company own and explore

your world of Leica Geosystems: View detailed information on

your products and update your products with the latest soft-

ware and keep up-to-date with the latest documentation.

myService View the current service status and full service history of your

products in Leica Geosystems service centres. Access detailed

information on the services performed and download your latest

calibration certificates and service reports.

mySupport View the current service status and full service history of your

products in Leica Geosystems service centres. Access detailed

information on the services performed and download your latest

calibration certificates and service reports.

myTraining Enhance your product knowledge with Leica Geosystems

Campus - Information, Knowledge, Training. Study the latest

online training material on your products and register for semi-

nars or courses in your country.

myTrustedServices Add your subscriptions and manage users for Leica Geosystems

Trusted Services, the secure software services, that assist you

to optimise your workflow and increase your efficiency.

Leica DM2000, Table of Contents 4

Table of Contents

In this manual Chapter Page

1 Safety Directions 6

1.1 General 6

1.2 Definition of Use 7

1.3 Limits of Use 7

1.4 Responsibilities 7

1.5 Hazards of Use 8

1.6 Electromagnetic Compatibility EMC 10

1.7 FCC Statement, Applicable in U.S. 11

1.8 ICES-003 Statement, Applicable in Canada 12

2 Description of the System 14

2.1 General 14

2.2 System Components 14

2.3 Delivery Contents 14

2.4 DS2000 Components 15

2.5 Accessories 16

2.6 General Battery Handling 17

2.7 Requirements for Using a GPS antenna with the DS2000 17

3 Setup 18

3.1 Unfolding and Adjusting the Handle 18

3.2 Preparing the Antenna 19

3.3 Attaching and Connecting the Laptop or Tablet 19

3.4 Inserting the Battery 20

3.5 Mounting the Spray Support 20

3.6 Mounting the GPS Support 21

3.7 Calibrating the Encoders 22

4 Software 23

4.1 Software Installation 23

4.2 Main Menu 23

4.3 Acquisition of Scan Data 24

4.3.1 The Acquisition Screen 24

4.3.2 The Assisted Project Setup Screen 28

4.3.3 Data Acquisition with the New Project Function 28

4.3.4 Data Acquisition with the New Assisted Project Func-

tion 29

4.3.5 Placing a Target 31

4.3.6 Generating a Survey Report 32

4.4 Review of Scan Data 33

4.4.1 The Review Acquisition Screen 33

4.4.2 Review of Scan Data with the Open Project Function 34

4.5 Export of Scan Data 34

4.6 Settings 35

4.6.1 Survey Settings 35

4.6.2 Hardware Settings 37

4.6.3 Graphics Settings 38

4.6.4 International Settings 39

Leica DM2000, Table of Contents 5

5 Planning a Survey 40

6 Procedures for Working with the DS2000 41

6.1 Preparing an Acquisition 41

6.2 Marking Out Targets on Site 41

6.3 Mapping Utilities without Using GPS 42

6.4 Mapping Utilities Using GPS 43

7 Care and Transport 44

7.1 Transport 44

7.2 Storage 44

7.3 Cleaning and Drying 44

8 Technical Data 45

8.1 General 45

8.2 Conformity to National Regulations 46

9 Software Licence Agreement 47

Leica DM2000, Safety Directions 6

1 Safety Directions

1.1 General

Description The following directions enable the person responsible for the product, and the

person who actually uses the equipment, to anticipate and avoid operational hazards.

The person responsible for the product must ensure that all users understand these

directions and adhere to them.

About Warning

Messages

Warning messages are an essential part of the safety concept of the instrument. They

appear wherever hazards or hazardous situations can occur.

Warning messages...

• make the user alert about direct and indirect hazards concerning the use of the

product.

• contain general rules of behaviour.

For the users‘ safety, all safety instructions and safety messages shall be strictly

observed and followed! Therefore, the manual must always be available to all persons

performing any tasks described here.

DANGER, WARNING, CAUTION and NOTICE are standardised signal words for iden-

tifying levels of hazards and risks related to personal injury and property damage. For

your safety, it is important to read and fully understand the following table with the

different signal words and their definitions! Supplementary safety information

symbols may be placed within a warning message as well as supplementary text.

Type Description

DANGER Indicates an imminently hazardous situation which, if not

avoided, will result in death or serious injury.

WARNING Indicates a potentially hazardous situation or an unintended

use which, if not avoided, could result in death or serious injury.

CAUTION Indicates a potentially hazardous situation or an unintended

use which, if not avoided, may result in minor or moderate

injury.

NOTICE Indicates a potentially hazardous situation or an unintended

use which, if not avoided, may result in appreciable material,

financial and environmental damage.

Important paragraphs which must be adhered to in practice as

they enable the product to be used in a technically correct and

efficient manner.

Leica DM2000, Safety Directions 7

1.2 Definition of Use

Intended use • Detecting and localising underground utilities, such as cables or pipes.

• Measuring the depth of underground utilities.

• Mapping underground utilities.

• Surveying (underground utilities).

• Recording raw data and computing coordinates using code signal from GNSS satel-

lites (GNSS Systems).

• Data communication with external appliances.

Reasonably fore-

seeable misuse

• Use of the product without instruction.

• Use outside of the intended use and limits.

• Disabling safety systems.

• Removal of hazard notices.

• Opening the product using tools, for example screwdriver, unless this is permitted

for certain functions.

• Modification or conversion of the product.

• Use after misappropriation.

• Use of products with obvious damages or defects.

• Use with accessories from other manufacturers without the prior explicit approval

of Leica Geosystems.

• Inadequate safeguards at the working site.

1.3 Limits of Use

Environment Suitable for use in an atmosphere appropriate for permanent human habitation: not

suitable for use in aggressive or explosive environments.

DANGER Local safety authorities and safety experts must be contacted before working in

hazardous areas, or close to electrical installations or similar situations by the person

in charge of the product.

1.4 Responsibilities

Manufacturer of

the product

Leica Geosystems AG, CH-9435 Heerbrugg, hereinafter referred to as Leica Geosys-

tems, is responsible for supplying the product, including the user manual and original

accessories, in a safe condition.

Person responsible

for the product

The person responsible for the product has the following duties:

• To understand the safety instructions on the product and the instructions in the

user manual.

• To ensure that it is used in accordance with the instructions.

• To be familiar with local regulations relating to safety and accident prevention.

• To inform Leica Geosystems immediately if the product and the application

becomes unsafe.

• To ensure that the national laws, regulations and conditions for the operation of

e.g. radio transmitters or lasers are respected.

Leica DM2000, Safety Directions 8

1.5 Hazards of Use

Exposure to Radio

Frequency (RF)

Signals

The product is normally operated at least 1 m away from the user. At a distance of at

least 1 m or greater, the typical power density level is below 1 W/cm2(0.01 W/m2).

This value is far below the level specified by the current regulations.

When operated in the normal manner of intended use, this product does not

pose health or safety risks regarding radio frequency signals.

CAUTION Watch out for erroneous measurement results if the product has been dropped or has

been misused, modified, stored for long periods or transported.

Precautions:

Periodically carry out test measurements and perform the field adjustments indicated

in the user manual, particularly after the product has been subjected to abnormal use

as well as before and after important measurements.

DANGER Because of the risk of electrocution, it is dangerous to use poles, levelling staffs and

extensions in the vicinity of electrical installations such as power cables or electrical

railways.

Precautions:

Keep at a safe distance from electrical installations. If it is essential to work in this

environment, first contact the safety authorities responsible for the electrical instal-

lations and follow their instructions.

WARNING If the product is used with accessories, for example masts, staffs, poles, you may

increase the risk of being struck by lightning.

Precautions:

Do not use the product in a thunderstorm.

CAUTION If the accessories used with the product are not properly secured and the product is

subjected to mechanical shock, for example blows or falling, the product may be

damaged or people can sustain injury.

Precautions:

When setting up the product, make sure that the accessories are correctly adapted,

fitted, secured, and locked in position.

Avoid subjecting the product to mechanical stress.

WARNING Inadequate securing of the working site can lead to dangerous situations, for example

in traffic, on building sites and at industrial installations.

Precautions:

Always ensure that the working site is adequately secured. Adhere to the regulations

governing safety, accident prevention and road traffic.

WARNING During dynamic applications, for example stakeout procedures there is a danger of

accidents occurring if the user does not pay attention to the environmental conditions

around, for example obstacles, excavations or traffic.

Precautions:

The person responsible for the product must make all users fully aware of the existing

dangers.

Leica DM2000, Safety Directions 9

WARNING If you open the product, either of the following actions may cause you to receive an

electric shock.

• Touching live components

• Using the product after incorrect attempts were made to carry out repairs

Precautions:

Do not open the product. Only Leica Geosystems authorised service centres are enti-

tled to repair these products.

CAUTION During the transport, shipping or disposal of batteries it is possible for inappropriate

mechanical influences to constitute a fire hazard.

Precautions:

Before shipping the product or disposing of it, discharge the batteries by running the

product until they are flat.

When transporting or shipping batteries, the person in charge of the product must

ensure that the applicable national and international rules and regulations are

observed. Before transportation or shipping contact your local passenger or freight

transport company.

WARNING High mechanical stress, high ambient temperatures or immersion into fluids can cause

leakage, fire or explosions of the batteries.

Precautions:

Protect the batteries from mechanical influences and high ambient temperatures. Do

not drop or immerse batteries into fluids.

WARNING If battery terminals are short-circuited e.g. by coming in contact with jewellery, keys,

metallised paper or other metals, the battery can overheat and cause injury or fire, for

example by storing or transporting in pockets.

Precautions:

Make sure that the battery terminals do not come into contact with metallic objects.

WARNING If the product is improperly disposed of, the following can happen:

• If polymer parts are burnt, poisonous gases are produced which may impair health.

• If batteries are damaged or are heated strongly, they can explode and cause

poisoning, burning, corrosion or environmental contamination.

• By disposing of the product irresponsibly you may enable unauthorised persons to

use it in contravention of the regulations, exposing themselves and third parties to

the risk of severe injury and rendering the environment liable to contamination.

Precautions:

Product-specific treatment and waste management information can be downloaded

from the Leica Geosystems home page at http://www.leica-

geosystems.com/treatment or received from your Leica Geosystems distributor.

WARNING Only Leica Geosystems authorised service centres are entitled to repair these prod-

ucts.

The product must not be disposed with household waste.

Dispose of the product appropriately in accordance with the national

regulations in force in your country.

Always prevent access to the product by unauthorised personnel.

Leica DM2000, Safety Directions 10

1.6 Electromagnetic Compatibility EMC

Description The term Electromagnetic Compatibility is taken to mean the capability of the product

to function smoothly in an environment where electromagnetic radiation and electro-

static discharges are present, and without causing electromagnetic disturbances to

other equipment.

WARNING Electromagnetic radiation can cause disturbances in other equipment.

Although the product meets the strict regulations and standards which are in force in

this respect, Leica Geosystems cannot completely exclude the possibility that other

equipment may be disturbed.

CAUTION There is a risk that disturbances may be caused in other equipment if the product is

used with accessories from other manufacturers, for example field computers,

personal computers or other electronic equipment, non-standard cables or external

batteries.

Precautions:

Use only the equipment and accessories recommended by Leica Geosystems. When

combined with the product, they meet the strict requirements stipulated by the guide-

lines and standards. When using computers or other electronic equipment, pay atten-

tion to the information about electromagnetic compatibility provided by the manufac-

turer.

CAUTION Disturbances caused by electromagnetic radiation can result in erroneous measure-

ments.

Although the product meets the strict regulations and standards which are in force in

this respect, Leica Geosystems cannot completely exclude the possibility that the

product may be disturbed by intense electromagnetic radiation, for example, near

radio transmitters, two-way radios or diesel generators.

Precautions:

Check the plausibility of results obtained under these conditions.

CAUTION If the product is operated with connecting cables attached at only one of their two

ends, for example external supply cables, interface cables, the permitted level of elec-

tromagnetic radiation may be exceeded and the correct functioning of other products

may be impaired.

Precautions:

While the product is in use, connecting cables, for example product to external battery,

product to computer, must be connected at both ends.

Table des matières

Autres manuels Leica Instrument de mesure

Leica

Leica Lino P5 Manuel utilisateur

Leica

Leica Racer 100 Manuel utilisateur

Leica

Leica LINO L6R Manuel utilisateur

Leica

Leica Viva Manuel utilisateur

Leica

Leica TPS1200 series Manuel utilisateur

Leica

Leica ScanStation P50 Manuel utilisateur

Leica

Leica Disto E7100i Manuel utilisateur

Leica

Leica DISTO D410 Manuel utilisateur

Leica

Leica TPS1200 series Manuel de la liste des pièces

Leica

Leica TPS1200 series Manuel du produit

Leica

Leica iCB50 Manuel utilisateur

Leica

Leica DNA03 Manuel utilisateur

Leica

Leica PIPER 100 Manuel utilisateur

Leica

Leica Lino L2P5 Manuel utilisateur

Leica

Leica Viva TS16 Manuel utilisateur

Leica

Leica Disto X310 Manuel utilisateur

Leica

Leica iCON PA10 Manuel utilisateur

Leica

Leica tps1100 Manuel utilisateur

Leica

Leica TM30 Series Manuel utilisateur

Leica

Leica PIPER 100 Manuel utilisateur

Leica

Leica Lino L2P5 Guide de dépannage

Leica

Leica Captivate Manuel du produit

Leica

Leica DNA03 Manuel utilisateur

Leica

Leica SR530 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur