9
5 - RADIO PROGRAMMING
This procedure lets you programme compatible multifunctional or generic transmitters.
WHICH REMOTE CONTROL DO YOU WANT TO ASSOCIATE WITH THE CONTROL UNIT?
MULTIFUNCTIONAL TRANSMITTERS
CODES:
HB70-SLCT, HB70-SPCT,
HB80-1C, HB80-1DIM, HB80-2L, HB80-30D, HB80-30RGBW, HB80-4C, HB80-4DIM, HB80-4L,
HB90-6LT,
ROUND-1SP,
SENSA-M, SENSA-P, SENSA-R35M, SENSA-R35P, SENSA-R35T, SENSA-T,
TOUCH-1, TOUCH-1CCT, TOUCH-1DIM, TOUCH-1SP, TOUCH-1L , TOUCH-1RGBW, TOUCH-3C, TOUCH-4DIM, TOUCH-CFU
With multifunctional transmitters the transmitter control modes depend on the model used.
Refer to the transmitter manual, to the paragraph entitled "commands sent by the transmitter",
bearing in mind that it is a "up/down/stop" device.
GENERIC TRANSMITTERS (WIRELESS BUS)
CODES:
HB80-6G,
MCU-TX4,
TOUCH-1G, TOUCH-2G, TOUCH-4G, TOUCH-LOCK4, TOUCH-TX2,
ROUND-1G
With generic transmitters, the transmitter's control modes depend on the function associated with the key
during the association procedure.
The available function for the key are:
TABLE 5.1 - KEY FUNCTIONS OF THE GENERIC TRANSMITTER
UP / STOP / DOWN / STOP
DIP :
ON ON OFF
UPDIP :
OFF ON ON
DOWNDIP :
ON OFF ON
POSITION OF DIP
IN "STEP 1b" OF
THE PROCEDURE
KEY
FUNCTION
STOPDIP :
OFF OFF ON
