Larson Electronics RL-85-3W1 Manuel utilisateur

Table des matières

Autres manuels Larson Electronics Mettre en lumière

Larson Electronics

Larson Electronics HUL-P10WR-DM-ILS-1227 Manuel utilisateur

Larson Electronics

Larson Electronics LEDWL 1227 Series Manuel

Larson Electronics

Larson Electronics Golight Radioray 2000 Manuel

Larson Electronics

Larson Electronics LEDWL 1227 Series Manuel

Larson Electronics

Larson Electronics WALTP-Q500 Manuel utilisateur

Larson Electronics

Larson Electronics GL-9950 Manuel

Larson Electronics

Larson Electronics 2000-M Manuel

Larson Electronics

Larson Electronics RL-20 Manuel utilisateur

Larson Electronics

Larson Electronics HL.RL-85-LED-36W-CPR-1227 Manuel utilisateur

Larson Electronics

Larson Electronics HML-5M-RC Manuel utilisateur

Larson Electronics

Larson Electronics GL-2000-S-E Manuel

Larson Electronics

Larson Electronics PTB-1-M Manuel utilisateur

Larson Electronics

Larson Electronics HUL-18 Manuel utilisateur

Larson Electronics

Larson Electronics GL-9901 Manuel

Larson Electronics

Larson Electronics Golight GL-3000-24-M Manuel utilisateur

Larson Electronics

Larson Electronics LE-224-LED Manuel utilisateur

Larson Electronics

Larson Electronics HID-A1830-WA Manuel utilisateur

Larson Electronics

Larson Electronics HID-X970-SA Manuel utilisateur

Larson Electronics

Larson Electronics GL-2100-E-F Manuel

Larson Electronics

Larson Electronics GL-8130-M Manuel utilisateur

Larson Electronics

Larson Electronics HUL-18-TRP Manuel utilisateur

Larson Electronics

Larson Electronics Golight Stryker GL-30064ST Manuel utilisateur

Larson Electronics

Larson Electronics GL5150-12IR Manuel

Larson Electronics

Larson Electronics HUL-LED25WRE-CPR Manuel utilisateur

Manuels Mettre en lumière populaires d'autres marques

Guangzhou Yinhe Lighting&Sound Equipment Factory

Guangzhou Yinhe Lighting&Sound Equipment Factory NE-204 Manuel utilisateur

LIVARNO home

LIVARNO home 375304 2101 Instructions originales

Cameo

Cameo CLQS40WW Manuel utilisateur

Leviton

Leviton Ellipsoid 5/50 Manuel utilisateur

Monacor

Monacor img Stage Line PARL-56PDX/CR Manuel utilisateur

Vector

Vector SL3AKV Manuel utilisateur

Quantum

Quantum Q262 Manuel d'exploitation

Philips

Philips Vari-lite VL3015LT Manuel utilisateur

EUROSPOT

EUROSPOT C51 Manuel utilisateur

DTS

DTS MINI BRICK ARC Manuel utilisateur

Federal Signal Corporation

Federal Signal Corporation VISIBEAM II Manuel

ACME

ACME LED-MS350B Manuel utilisateur

EuroLite

EuroLite Akku flat light 1 Manuel utilisateur

Commercial Electric

Commercial Electric SPTM-1401 Manuel utilisateur

Vision & Control

Vision & Control SLB-500-W5K7-P-SL Manuel utilisateur

Teknik

Teknik FLEXI Manuel utilisateur

Craftsman

Craftsman CMXLSB10 Manuel utilisateur

EuroLite

EuroLite LED SLS-144 UV Floor Spot Manuel utilisateur

Larson Electronics LLC www.LarsonElectronics.com sales@larsonelectronics.com

9419 E US HWY 175, Kemp, TX 75143 - P: (800) 369-6671 - F: (903) 498-3364

RL‐85-3W1

INFRARED LIGHT

These handheld spotlights are offered in 850 nanometer and 940 nanometer configurations. A

night vision system (i.e. night vision goggles or an infrared camera) is required to be able to use

the infrared light output of this handheld spotlight.

850NM can be seen by GEN 2 night vision systems. Typical night vision goggles are GEN 2.

940NM can be seen by GEN 3 night vision systems. Most 940NM systems are government use

equipment.

POWER

1. This rechargeable spotlight can be plugged into a standard household wall charger. The charger

connects to the light at the base of the handle.

2. The charger will have a solid red indicator light when the battery is charging.

3. Charge time will vary based on remaining battery charge and battery condition. Maximum

charge time is 4 hours.

4. The spotlight can be turned on while the charger is plugged in. However, the spotlight will not

charge while the light is being operated.

5. This LED spotlight has a lithium ion battery. The battery can be charged as little or as much as

desired without “memory” issues. Lithium ion batteries do not need to be fully drained before

charging nor fully charged before continuing usage.

6. The LED indicator will turn green when the battery is fully charged.

WARNING: While the charger is intelligent enough to back off the charger when the battery is

fully charged, it is not recommended that you leave the light on the charger indefinitely.

Ultimately, the heat created by the charger and the battery will degrade the components.

Leaving the battery to charge for a day will not cause damage. However, leaving the battery to

charge for multiple days or weeks continuously will degrade the life of the charger and the

battery.

7. Lithium ion batteries generally will discharge very slowly while not being used. You can expect a

fully charged lithium ion battery to last 9-12 months on the shelf if the light was fully charged

when stored.

CHANGING THE BATTERY

The battery is not designed to be “swapped out” in the field. It can be done, but it is not designed to

operate like a cordless drill, allowing the operator to snap a replacement battery into place.

Larson Electronics LLC www.LarsonElectronics.com sales@larsonelectronics.com

9419 E US HWY 175, Kemp, TX 75143 - P: (800) 369-6671 - F: (903) 498-3364

1. Remove the 4 screws holding the top cover in place on the rear of the main housing. This is the

squared section. The 4 screws can be seen when you turn the light upside down. Once the top

cover is removed, you will see the battery pack.

2. The battery pack consists of 6 cells welded together. A single Molex style connector brings

power from the battery to the LED bulb. Disconnect this connector and remove the battery pack

as a whole. Double sided tape secures the battery pack. Be sure that if the tape has lost its

adhesion qualities that you replace it when replacing the battery pack.

3. Replace the battery pack (part number RL-85-BATT), replace tape if required, reconnect the

power connector from the battery to the light, and replace the top cover. Secure the 4 top cover

screws.

4. Lithium ion batteries have a very long life. Users should not have to replace the battery pack

often.

MOUNTING

1. These units are handheld via the pistol grip handle, but can be mounted via the 3/8-16” brass

nut fastener embedded into the base of the handle.

2. We offer a 100lb magnetic base (MM-2) for magnetic mounting, and a permanent mounting

plate with swiveling and tilting bracket (PMB-4X4) for permanent mounting.