Larson Electronics Golight Manuel utilisateur

TPM-GL20004-16CC

Larson Electronics, LLC Phone: (800) 369-6671 Fax: (903) 498-3364 www.larsonelectronics.com

1of 2

Golight LED Spotlight on Telescoping Pole Mount & Mounting Bracket

Wireless Remote - 16' Coil Cord

Instruction Manual

Do not attempt operation until you are familiar with all warnings, precautions, and procedures outlined within this

instruction sheet. Read carefully before operating. Retain these instructions for future reference.

WARNING:

INSTALL AWAY FROM ANY ELECTRICAL WIRES OR OVERHEAD POWER LINES.

KEEP PLUGS AND RECEPTACLES DRY.

DO NOT TOUCH HOT LENS OR ENCLOSURE.

DO NOT REMAIN IN LIGHT IF SKIN FEELS WARM.

DO NOT LOOK DIRECTLY AT LIGHTED LAMP.

KEEP LAMP AWAY FROM MATERIALS THAT MAY BURN.

The TPM-GL20004-16CC Golight LED Spotlight Light on Telescoping Pole Mount with Mounting Bracket from Larson

Electronics produces a 2,520 lumen light beam capable of reaching over 900 feet in distance. This 36 watt LED Golight

offers wireless remote pan and tilt control, a single handheld remote control, and a housing finished in a durable white

finish. This Golight is weatherproof with a weatherproof remote control and operates with 12 volt DC current.

LIGHT POLE OPERATION

1. Utilize the predrilled holes and mount the flat bracket in a location that can

support the load.

2. Place telescoping pole in base mount and tighten base mount hand screw

until snug.

3. Place Golight lamp head over the top pole and tighten hand screw.

4. Loosen the black adjustment knob for each adjustment sleeve to extend the

tripod. Start with the top section when lifting.

5. Tighten adjustment knob once desired height is achieved.

WIRING

This unit is shipped with the selected cord

option. Connect the light to the appropriate

power source matching 12V DC.

Wire battery clamps, or ring terminals

according to diagram.

This pole features a pneumatic braking system that prevents unexpected or sudden

collapse of the pole. If the pole is loaded with a pair of heavy fixtures for instance and

the operator inadvertently releases the locking tabs, the pole will simply ease down

gently rather than suddenly collapse. This is a great feature when mounting expensive

electronic devices and you’d like the added security of knowing there is no chance of

serious damage should the pole be released.

POWER SUPPLY

Connect the deutsch connectors for power. Be sure this is securely fastened. Then

plug the cord into a compatible outlet providing 12V DC. The light is now powered and will

operate with the remote control.

OPERATION OF SPOTLIGHT

1. Using the remote control, turn on the light by depressing the on/ off button.

2. With the arrows on the wireless control, rotate your light to the desired location.

3. The speed of the light rotation can be controlled by depressing the fast/slow button one time and by depressing

it again to restore the original speed.

ADJUSTMENT

POINTS

HAND

SCREW

Golight LED

Spotlight

DEUTSCH CONNECTOR /

QUICK DISCONNECT

TPM-GL20004-16CC

Larson Electronics, LLC Phone: (800) 369-6671 Fax: (903) 498-3364 www.larsonelectronics.com

2of 2

BATTERY INSTALLATION AND REMOVAL FOR TRANSMITTER

Remove battery cover: for wireless hand-held transmitter, remove phillips head screw to remove cover. With battery

compartment now exposed, insert GP 23A 12V batteries according to the correct polarity or gently remove batteries by

grabbing the positive end and lifting up.

PROGRAMMABLE REMOTE INSTRUCTIONS

The Light is controlled with a programmable remote with 2187 different channels. This feature allows you the freedom to

change the channel selection, and the receiver re-learns the new selection. This light has been pre-programmed at the

factory, and it is not necessary to re-program the transmitter, unless you experience outside interference.

To program transmitter:

1. IMPORTANT Disconnect power.

2. Remove battery cover from remote control.

3. Set the 7 dip switches to a selection of your choice. There are 3 positions on each; positive, negative and

neutral. Use a small screwdriver and select a position for each dip switch. *Please note that the orientation of

the +/- switch positions may vary among different models of wireless remote controls.

4. Insert both GP 23A 12V batteries. Be sure batteries have adequate charge.

5. Replace battery cover.

a. Depress the on/off button and hold it down. Red LED will light.

b. While holding the on/off button down, reinstall the power (replace fuse or connect vehicle battery).

c. Keep on/off button depressed for 5-6 seconds, and then release. The light should now be programmed.

USAGE:

This light is intended for off-road and utility use only

This light is intended to be mounted outside the vehicle while in use

This light may only be disassembled and repaired by an authorized representative

MISUSE:

This light is not approved for road or highway use

This light is not approved for underwater use

This light is not approved for inverted mounting

This light is not approved for use inside a vehicle or enclosure and power should be disconnected prior to

placing the light in such circumstance

This light may be damaged if operated in icing conditions

This light may only be dismantled by an authorized representative

Any violation of the above referenced misuses will be considered grounds for warranty refusal

IMPORTANT SAFETY INFORMATION

This symbol is to alert you to important operating or servicing instructions that appear in your instructions. Always follow

basic safety precautions when using this product to reduce the risk of injury, fire or electric shock.

This light is for off road and utility use only. It is not designed for road use as a driving light.

The Golight complies with Part. 15.105 of the FCC Rules. This equipment has been tested and found to comply with the limits for a

Class B digital device. These limits are designed to provide reasonable protection against harmful interference in a residential

installation.

FCC RULE Part. 15.21 - Changes or modifications made by the user not expressly approved by Larson Electronics, LLC for

compliance could void the user’s authority to operate the equipment.

THESE INSTRUCTIONS MAY NOT COVER ALL DETAILS OR VARIATIONS OF THIS PRODUCT FOR YOUR EQUIPMENT OR INSTALLATION REQUIREMENTS. SHOULD FURTHER

INFORMATION NOT COVERED BY THESE INSTRUCTIONS BE REQUIRED, PLEASE CONTACT LARSON ELECTRONICS BY EMAIL AT [email protected] OR BY PHONE

AT 1-800-369-6671 FOR FURTHER ASSISTANCE.

PLEASE VISIT LARSONELECTRONICS.COM FOR WARRANTY AND RETURN INFORMATION.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Larson Electronics Luminaire

Larson Electronics

Larson Electronics EPLC-48-432 Manuel utilisateur

Larson Electronics

Larson Electronics EPLC2-AMB-70LED-50 Manuel

Larson Electronics

Larson Electronics EXP-EMG-EXT-LE6-4L Manuel utilisateur

Larson Electronics

Larson Electronics EPL-HB-50LED-RT-SP0122 Manuel utilisateur

Larson Electronics

Larson Electronics EPL-LP-12-LED-SFC.LP Manuel utilisateur

Larson Electronics

Larson Electronics IND-AHF-BX-UVC-R2-120V-15C Manuel utilisateur

Larson Electronics

Larson Electronics WAL-C-4XM Manuel utilisateur

Larson Electronics

Larson Electronics EPL-WPLED-100W-RT-DIMM Manuel utilisateur

Larson Electronics

Larson Electronics EPLC2-LED-400W Manuel utilisateur

Larson Electronics

Larson Electronics EPL-HB-5K-LED Manuel utilisateur

Larson Electronics

Larson Electronics LEDWP-600E-E2E-10C Manuel utilisateur

Larson Electronics

Larson Electronics GL-3 Series Manuel utilisateur

Larson Electronics

Larson Electronics EPL-16BS-1X150LED-X24I-C1D1-200 Manuel

Larson Electronics

Larson Electronics EPLC2-24-50LED Manuel utilisateur

Larson Electronics

Larson Electronics EPLC2-WPLED-100W-RT Manuel utilisateur

Larson Electronics

Larson Electronics IND-HR-UVC-EXS-R1-24-3L-120V-2X Manuel utilisateur

Larson Electronics

Larson Electronics ATEX-EPL-TL-3X10W-C Manuel utilisateur

Larson Electronics

Larson Electronics HAL-PT-LED-CPR-C-100 Manuel utilisateur

Larson Electronics

Larson Electronics LEDWL-STRB-RED-1227 Manuel utilisateur

Larson Electronics

Larson Electronics HALD-24-1X150LED-V3-DIMM Manuel utilisateur

Larson Electronics

Larson Electronics HAL-PRM-150W-LED-100 Manuel utilisateur

Larson Electronics

Larson Electronics RCL360-LED-40 Manuel utilisateur

Larson Electronics

Larson Electronics EPLC2-LB-50LED-RT-CM Manuel utilisateur

Larson Electronics

Larson Electronics EPL-PM-1X30LED-100 Manuel

Manuels Luminaire populaires d'autres marques

Emos

Emos CLASSIC ZY1431T Manuel utilisateur

Westinghouse

Westinghouse Outdoor Lighting Fixture Manuel utilisateur

Hedler

Hedler C 12 silent Manuel utilisateur

Blizzard Lighting

Blizzard Lighting Puck: CSI Manuel utilisateur

Energetic Lighting

Energetic Lighting ELYSL-5004 Series Manuel utilisateur

Lightmaxx

Lightmaxx Shaft 5R Manuel utilisateur

Triarch

Triarch 31083 Manuel utilisateur

Philips

Philips 32614 Series Manuel utilisateur

IKEA

IKEA TIVED Manuel utilisateur

Lightolier

Lightolier LP200 Manuel utilisateur

Chauvet Professional

Chauvet Professional ROGUE R1 BEAM WASH Manuel utilisateur

Martin

Martin MAC 250 Krypton Manuel utilisateur

Cooper Lighting

Cooper Lighting Halo L3232E Manuel utilisateur

Stageline

Stageline ODW-2410RGBW Manuel utilisateur

Light Sky

Light Sky Tornado Series Manuel utilisateur

Lightolier

Lightolier Paralyte 2424 PLA2G9LS26U Manuel utilisateur

Lightolier

Lightolier Lytespan 83ED17S Manuel utilisateur

Lightolier

Lightolier Calculite CS8226 Manuel utilisateur