Laird BL654 Manuel utilisateur

Embedded Wireless Solutions Support Center:

http://ews-support.lairdtech.com

www.lairdtech.com/bluetooth

Americas: +1-800-492-2320

Europe: +44-1628-858-940

Hong Kong: +852 2923 0610

Quick Start Guide v1.0

This guide demonstrates how to install a Laird BL654 USB dongle (part# 451-00003) onto a Windows computer and how

to communicate with it.

The following equipment and utilities are required:

▪Laird BL654 USB BLE USB adapter, Part # 451-00003

▪FTDI USB-to-Serial drivers for the BL654 USB dongle (found at http://www.ftdichip.com/FTDrivers.htm)

▪UwTerminalX, provided by Laird at https://github.com/LairdCP/UwTerminalX

To install the BL654 dongle, follow these steps:

1. Connect the BL654 USB dongle (Figure 1) to a spare USB port on your computer or to a USB hub that can provide at

least 100 milliamps of power.

Figure 1: Laird BL654-US

Follow the on-screen prompts. Depending on your version of Windows, you may need to install the FTDI drivers.

When complete, the BL654 USB dongle appears in the Windows device manager as a USB serial port (Figure 2).

Make a note of the COM port number to use in step 6.

Figure 2: BL654 USB dongle as shown in Device Manager

2. Extract UwTerminalX to a selected folder and run the program (no installation is required).

3. From the Config tab in the Device drop-down menu, select BL65x to populate the baud, parity, stop bits, data bits,

and handshaking settings (Figure 3).

Embedded Wireless Solutions Support Center:

http://ews-support.lairdtech.com

www.lairdtech.com/bluetooth

Americas: +1-800-492-2320

Europe: +44-1628-858-940

Hong Kong: +852 2923 0610

Figure 3: UwTerminalX configuration

4. If BL65x is not a selectable device, set the following:

▪Baudrate: 115200

▪Parity: None

▪Stop Bits: 1

▪Data Bits: 8

▪Handshaking: CTS/RTS

5. In the Port dropdown, select the COM port associated with your BL654 USB dongle.

6. At the top of the screen, click OK.

7. Open UwTerminalX and type at i 2 and press Enter to confirm you can communicate with the dongle on the

correct COM port (Figure 4).

Figure 4: Checking communication with the BL654 USB dongle

Further information relating to the BL654 USB dongle is available from the Laird BL654 product page:

https://www.lairdtech.com/products/bl654-ble-thread-nfc-modules

Version

Date

Notes

Contributor(s)

Approver

1.0

13 June 2018

Initial Release

Mahendra Tailor

Jonathan Kaye

Autres manuels pour BL654

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Laird Matériel informatique

Laird

Laird SDC-WB40NBT Manuel utilisateur

Laird

Laird LSR STERLING-LWB STM Manuel utilisateur

Laird

Laird BL654 Manuel utilisateur

Laird

Laird BL654 Manuel utilisateur

Laird

Laird OL 4503 Instructions d'installation

Laird

Laird BL620-US Manuel utilisateur

Laird

Laird Bx600 Series Manuel utilisateur

Laird

Laird BL654 Instructions d'installation et d'utilisation

Laird

Laird LA 5000 Manuel utilisateur

Laird

Laird BT900-US Guide de configuration rapide

Laird

Laird BTM430 Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur