Lacanche Spark Manuel utilisateur
17721 - 132nd Ave NE Woodinville, WA 98072 USA 1.888.222.2930
www.frenchranges.com
Spark Module Replacement (Front Access)
1. Shut off breaker to range.
2. Lift/Remove range top. Please refer to the lifting the rangetop video/worksheet.
3. Detach electrical knob D-shaft from electrical box. (above right)
4. Remove electrical box top with attached safety switch and drape over back panel.
5. Remove both 7mm screws at each side. These screws are installed from the rear. These will be difficult to
remove considering the back panel will be close to the wall. If a 7mm nutdriver is too long, consider using
a 7mm open end wrench or socket to loosen the screws.
17721 - 132nd Ave NE Woodinville, WA 98072 USA 1.888.222.2930
www.frenchranges.com
6. Remove both 7mm screws at box front base.
7. Electrical box front is free to move, angle it forward while shifting it to the side.
8. Loosen the screws holding the spark module in place and remove the module.
9. Replace each wire, one at a time, onto the new module.
10. Install in reverse order.
Table des matières
Autres manuels Lacanche Unité de contrôle
Manuels Unité de contrôle populaires d'autres marques
Festo
Festo Compact Performance CP-FB6-E Manuel de la liste des pièces
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur
JS Automation
JS Automation MPC3034A Manuel utilisateur
JAUDT
JAUDT SW GII 6406 Series Guide rapide
Spektrum
Spektrum Air Module System Manuel utilisateur
BOC Edwards
BOC Edwards Q Series Manuel utilisateur
