La Crosse Technology WS-9121U-IT Manuel utilisateur

Contents

Language Page

________________________________________________

English 1

French 35

Spanish 71

WIRELESS 915 MHz TEMPERATURE STATION

Instruction Manual

INTRODUCTION

Congratulations on purchasing this compact 915MHz Temperature

Station which displays time, indoor temperature and outdoor temperature

readings. With two easy to use keys, this product is ideal for use in the

home or office.

INSTANT TRANSMISSION is the state-

of-the-art new wireless transmission

technology, exclusively designed and

developed by LA CROSSE

TECHNOLOGY. INSTANT

TRANSMISSION offers you an

immediate update (every 16 seconds!)

of all your outdoor data measured

from the transmitters: follow your

climatic variations in real-time!

This product offers:

FEATURES

Removable

stand

LCD

Display

Function

Keys

Hanging

Hole

Battery

compartment

cover

The Temperature Station

•Quartz clock with 12 or 24-hour time display (hour and minute,

manually set)

•Indoor and outdoor temperature reading in Fahrenheit (°F) or

Celsius (°C)

•Can receive up to three outdoor transmitters

•Wireless transmission at 915 MHz

•Signal reception intervals at 16 seconds

•Minimum and Maximum records of indoor and outdoor

temperature

•Low battery indicator

•Wall mounting or table standing (removable table stand included)

The Outdoor Temperature Transmitter

•Remote transmission of outdoor temperature to Temperature

Station by 915 MHz transmission

•Water resistant casing

•Wall mounting and table-standing

SETTING UP:

When one transmitter is used

1. First, insert the batteries to the transmitter (see “How to install

and replace batteries in the Temperature transmitter”below).

2. Within 2 minutes of powering up the transmitter, insert the

batteries to the Temperature Station (see “How to install and

replace batteries in the Temperature station”below). Once the

batteries are in place, all segments of the LCD will light up briefly.

Following the indoor temperature and the time as 0:00 will be

displayed. If they are not shown in LCD after 60 seconds, remove

the batteries and wait for at least 60 seconds before reinserting

them. Once the indoor data is displayed user may proceed to the

next step.

3. After the batteries are inserted, the Temperature Station will start

receiving data signal from the transmitter. The outdoor

temperature should then be displayed on the Temperature

station. If this does not happen after 2 minutes, the batteries will

need to be removed from both units and reset from step 1.

4. In order to ensure sufficient 915 MHz transmission however, there

should be a distance of no more than 330 feet between the final

position of the Temperature Station and the transmitter (see notes

on “Positioning” and “915 MHz Reception”).

Using Multiple Sensors with One Temperature Station

1. User shall remove all the batteries from the temperature station and

transmitters and wait 60 seconds if setting has been done with one

transmitter before.

2. Insert the batteries to the first transmitter.

3. Within 2 minutes of powering up the first transmitter, insert the

batteries to the Temperature Station. Once the batteries are in

place, all segments of the LCD will light up briefly. Following the

indoor temperature and the time as 0:00 will be displayed. If they

are not shown in LCD after 60 seconds, remove the batteries and

wait for at least 60 seconds before reinserting them.

4. The outdoor temperature from the first transmitter (channel 1)

should then be displayed on the Temperature station. Also, the

signal reception icon will be displayed. If this does not happen after

2 minutes, the batteries will need to be removed from both units

and reset from step 1.

5. Insert the batteries to the second transmitter as soon as the

outdoor temperature readings from the first transmitter are

displayed on the temperature station.

Note: User shall insert the batteries into the second transmitter within 45

seconds of reception of the first transmitter.

6. The outdoor temperature from the second transmitter and the

"channel 2" icon should then be displayed on the Temperature

station. If this does not happen after 2 minute, the batteries will

need to be removed from all the units and reset from step 1.

Table des matières

Autres manuels La Crosse Technology Station météorologique

La Crosse Technology

La Crosse Technology WT-3131TWC Manuel utilisateur

La Crosse Technology

La Crosse Technology 308-1425CV2 Manuel utilisateur

La Crosse Technology

La Crosse Technology WS9029UITCA Manuel utilisateur

La Crosse Technology

La Crosse Technology C80758 Manuel utilisateur

La Crosse Technology

La Crosse Technology WS9123IT Manuel utilisateur

La Crosse Technology

La Crosse Technology WS-7047U Manuel utilisateur

La Crosse Technology

La Crosse Technology 9245 Manuel utilisateur

La Crosse Technology

La Crosse Technology WS-7034TWC Manuel utilisateur

La Crosse Technology

La Crosse Technology WS6210 Manuel utilisateur

La Crosse Technology

La Crosse Technology WS-2317 Manuel utilisateur

La Crosse Technology

La Crosse Technology 308-1412-3TXV2 Manuel utilisateur

La Crosse Technology

La Crosse Technology WS6826 Manuel utilisateur

La Crosse Technology

La Crosse Technology WD-3104U Manuel utilisateur

La Crosse Technology

La Crosse Technology WS6206 Manuel utilisateur

La Crosse Technology

La Crosse Technology WS-9625U-IT Manuel utilisateur

La Crosse Technology

La Crosse Technology 308-1425CA Manuel utilisateur

La Crosse Technology

La Crosse Technology S74177 Manuel utilisateur

La Crosse Technology

La Crosse Technology C84343 Manuel d'utilisation et d'entretien

La Crosse Technology

La Crosse Technology WS-2510 Manuel utilisateur

La Crosse Technology

La Crosse Technology V22-WRTHV2 Manuel utilisateur

La Crosse Technology

La Crosse Technology Wireless Weather Station Manuel utilisateur

La Crosse Technology

La Crosse Technology WS-9029U Manuel utilisateur

La Crosse Technology

La Crosse Technology C83100v3 Manuel utilisateur

La Crosse Technology

La Crosse Technology WS-8035U-IT Manuel utilisateur

Manuels Station météorologique populaires d'autres marques

Auriol

Auriol AHFL 433 A1 Manuel utilisateur

NexSens

NexSens G2-HYDROMET Manuel utilisateur

Hyundai

Hyundai WS 2202 Manuel utilisateur

IROX

IROX HBVR761 UV-X Manuel utilisateur

ADE

ADE WS 1711 Manuel utilisateur

Auriol

Auriol z29592 Manuel utilisateur

Auriol

Auriol 296289 Manuel utilisateur

Hyundai

Hyundai WS 2266 Manuel utilisateur

Ventus

Ventus W177 Manuel utilisateur

National Geographic

National Geographic VA Colour RC Manuel utilisateur

Renkforce

Renkforce 1208067 Manuel utilisateur

Levenhuk

Levenhuk Discovery Report WA40 Manuel utilisateur

Instant Transmission

Instant Transmission MA 10410 Manuel utilisateur

Lutron Electronics

Lutron Electronics PHB-318 Manuel utilisateur

WAREMA

WAREMA EWFS Weather station eco Manuel utilisateur

TFA

TFA 30.3013.IT Manuel utilisateur

Alecto

Alecto WS-1200 Manuel utilisateur

Oregon Scientific

Oregon Scientific RMR966PA Manuel utilisateur