La Crosse Technology Wireless Weather Station Manuel utilisateur

WIRELESS 868 MHz WEATHER STATION

Instruction Manual

INTRODUCTION:

Congratulations on purchasing this Weather Station with wireless 868MHz transmission of outdoor

temperature and humidity and display of indoor temperature and humidity. It is further featuring a DCF-77

radio controlled clock with date display. With four easy to use function keys, this innovative product is ideal

for use in the home or office.

Instant Transmission+» is the up and coming state

the

art new wireless

transmission technology, exclusively designed and developed by LA CROSSE

TECHNOLOGY.

“IT +” offers you an immediate update of all your outdoor data measured from the

transmitters: follow your climatic variations in real-time!

FEATURES:

The Weather Station

• DCF-77 Radio controlled time with manual setting options

• Time reception ON/OFF

• 12/24 hour display

• Hour and minute display, seconds indicated by flashing dot

• Time zone option ±12hours

• Date and month / weekday and date calendar display selectable

• Weather forecasting with 3 weather icons and weather tendency indicator

• Weather forecasting icon sensitivity setting

• Temperature display in degrees Celsius (°C) or Fahr enheit (°F) selectable

• Indoor and outdoor temperature display with MIN/MAX recording

Hanging Hole

LCD Display

Battery cover

Function Keys

Detachable stand

• Indoor and outdoor humidity reading displayed as RH% with MIN/MAX recordings

• All MIN/MAX temperature recordings show date and time received

• All MIN/MAX recordings can be reset

• Indoor comfort level indicator - happy or sad face icons

• Can take up to three outdoor transmitters

• LCD contrast setting

• Low battery indicator

•

Wireless transmission at 868 MHz

•

Signal reception intervals at 4 seconds

• Wall mounting or table standing

The Thermo-Hygro Outdoor Transmitter

• Remote transmission of outdoor temperature and humidity to Weather Station by 868

MHz

• Display alternately the outdoor temperature and humidity readings on LCD

• Shower proof casing

• Wall mounting case (Mounting at a sheltered place. Avoid direct rain and sunshine)

HOW TO INSTALL AND REPLACE BATTERIES IN THE WEATHER STATION

The Weather station uses 3 x AA, IEC LR6, 1.5V batteries. When batteries will need to

be replaced, the low battery icon will appear on the LCD. To install and replace the

batteries, please follow the steps below:

1. Insert finger or other solid object in the space at the bottom center of the battery

compartment and lift up to remove the cover.

2. Insert batteries observing the correct polarity (see marking).

3. Replace compartment cover.

HOW TO INSTALL AND REPLACE BATTERIES IN THE THERMO-HYGRO OUTDOOR

TRANSMITTER

The Thermo-hygro transmitter uses 2 x AA, IEC LR6, 1.5V battery. To install and replace

the batteries, please follow the steps below:

1. Remove the battery compartment cover.

2. Insert the batteries, observing the correct polarity (see marking).

3. Replace the battery compartment cover on the unit.

Note:

In the event of changing batteries in any of the units, all units need to be reset by following

the setting up procedures. This is because a random security code is assigned by the

transmitter at start-up and this code must be received and stored by the Weather station in

the first 3 minutes of power being supplied to it

BATTERY CHANGE:

It is recommended to replace the batteries in all units on an annual basis to ensure optimum accuracy of these

units.

Please participate in the preservation of the environment. Return used batteries to an

authorised depot.

SETTING UP:

WHEN ONE TRANSMITTER IS USED

1. First, insert the batteries in the transmitter (see “How to install and replace batteries in the Termo-hygro

outdoor transmitter”above).

2. Within 2 minutes of powering up the transmitter, insert the batteries in the Temperature Station (see “How to

install and replace batteries in the Weather Station”above). Once the batteries are in place, all

segments of the LCD will light up briefly and a short signal tone will sound. Following the indoor

temperature/humidity and the time as 0:00 will be displayed. If these information are not displayed on the

LCD after 60 seconds, remove the batteries and wait for at least 60 seconds before reinserting them. Once

the indoor data is displayed user may proceed to the next step.

3. After the batteries are inserted, the Weather station will start receiving data signal from the transmitter. The

outdoor temperature and humidity data should then be displayed on the Weather station. If this does not

happen after 2 minutes, the batteries will need to be removed from both units and reset from step 1.

4. In order to ensure sufficient 868 MHz transmission however, the distance between the Weather Station and

the transmitter should not be more than 100 meters (see notes on “Positioning” and “868 MHz

Reception”).

Note: In the event of changing batteries of the units, ensure the batteries do not spring free from the contacts.

Always wait at least 1 minute after removing the batteries before reinserting, otherwise start up and transmission

problems may occur.

WHEN MORE THAN ONE TRANSMITTER IS USED

1. User shall remove all the batteries from the Weather Station and transmitters, and wait 60 seconds.

2. Insert the batteries in the first transmitter.

3. Within 2 minutes of powering up the first transmitter, insert the batteries in the Weather Station. Once the

batteries are in place, all segments of the LCD will light up briefly and a short signal tone will sound.

Following the indoor temperature/humidity and the time as 0:00 will be displayed. If this information is not

displayed on the LCD after 60 seconds, remove the batteries from both units and wait for at least 60

seconds before reinserting them.

4. The outdoor temperature and humidity data from the first transmitter (channel 1) should then be displayed

on the Weather Station. Also, the signal reception icon will be displayed. If this does not happen after 2

minutes, the batteries will need to be removed from both units and reset from step 1.

5. Insert the batteries in the second transmitter as soon as the outdoor temperature and humidity readings from

the first transmitter are displayed on the Weather Station.

Note : User shall insert the batteries into the second transmitter within 45 seconds after the Weather

Station displays the information of the first transmitter.

6. The outdoor temperature and humidity from the second transmitter and the "channel 2" icon should then be

displayed on the Weather Station. If this does not happen after 2 minutes, the batteries will need to be

removed from all the units and reset from step 1.

7. Insert the batteries in the third transmitter as soon as the "channel 2" icon and outdoor data are displayed on

the Weather Station. Then within 2 minutes, the channel 3 outdoor data from the third transmitter will be

displayed and the channel icon will shift back to "1" once the third transmitter is successfully received. If this

does not happen, user shall restart the setting up from step 1.

Note : User shall insert the batteries into the third transmitter within 45 seconds after the Weather Station

displays the information of the first transmitter. Or immediately after reception of the second transmitter is

finished.

8. In order to ensure sufficient 868 MHz transmission however, the distance between the Weather Station and

the transmitter should not be more than 100 meters (see notes on “Positioning” and “868 MHz

Reception”).

IMPORTANT!

Transmission problems will arise if the setting for additional sensors is not followed as described above. Should

transmission problems occur, it is necessary to remove the batteries from all units and start again the set-up from

step 1.

FUNCTION KEYS:

Weather station:

The weather station has four easy to use function keys:

SET key (Setting):

• To enter the set mode for the following functions: LCD contrast, Time zone, Time Reception ON/OFF, 12/24

hour display, Manual time, Year, Date, °C/°F, and W eather forecasting icon sensitivity settings.

Note: The year can be displayed in the set mode (not displayed in normal mode)

IN key (Indoor)

• To toggle between the current/ minimum / maximum indoor temperature and humidity

• To press for over 3 seconds to reset the indoor maximum and minimum temperature and humidity records

(will reset all records to current level)

Note: The Time/date information is only available for MIN/MAX temperature data, and will be changed to default

time after the reset operation

• To change LCD contrast, time zone, Time Reception ON/OFF, 12/24 hour display, hour, year, month, day,

°C/°F and weather forecasting icon sensitivity in s etting modes

Note: in 24hr time display mode, the day is set by using the IN key. In 12hr time display mode, the month is set by

using the IN key

OUT key (Outdoor)

• To toggle between the current/ minimum/ maximum outdoor temperature and humidity

• Press for around 3 seconds to reset the outdoor maximumand minimumtemperature and humidity records

(will reset all records to current level of the relative transmitter being reset- each transmitter’s data must be

reset separately)

Note: The time/date information of MIN/MAX temperature will be reset to default time as well.

• To change minute, day, month units in setting modes

Note: in 24hr time display mode, the month is set by using the OUT key. In 12hr time display mode, the day is set

by using the OUT key

CH key (Channel)

• To toggle between the Thermo-Hygro outdoor transmitters 1, 2 and 3 (if more than 1 transmitter is used)

• To exit manual setting mode

LCD SCREEN:

* When the signal is successfully received by the Weather Station, the outdoor transmission icon will be switched

on. (If not successful, the icon will not be shown on LCD). The user can then easily see whether the last reception

Number showing Transmitter unit*

DCF Tower Icon

(for time reception)

Time

Calendar

Weather

Tendency Icon

Weather Forecast icon

Comfort Indicator Icon

Indoor Temperature in °C Indoor Relative Humidity %

Outdoor

Temperature in °C

Outdoor Relative Humidity %

Outdoor reception signal

Low battery indicator

(weather station)

Low battery indicator (transmitter)

was successful (icon on) or not (icon off). On the other hand, the short blinking of the icon shows that a reception is

currently taking place.

For better distinctness the LCD screen is split into 5 sections displaying the information for time, date, weather

forecast, indoors and outdoors.

LCD1 RADIO CONTROLLED TIME

• In normal mode display of radio controlled time.

•A reception tower symbol in the upper left hand corner of LCD 1 of the display indicates that the

DCF-77 time signal is scanned for (flashing) or received (steady).

•In setting mode display of manual setting values.

LCD 2 - CALENDAR

•Display date and month.

• In setting mode display of a variety of references and setting values

LCD 3 - WEATHER FORECAST AND WEATHER ICONS

•Display of the weather to be expected in form of three weather symbols and two weather tendency

indicators in form of an arrow, which change their appearance depending on the air pressure development.

LCD 4 - INDOOR TEMPERATURE AND HUMIDITY

•In normal mode, on the left, display of the current indoor temperature.

•In normal mode, on the right, display of the current indoor relative humidity.

•By pressing the “IN” key, display of the stored MIN/MAX indoor temperature and humidity with simultaneous

display of a MIN or MAX symbol in the upper center.

•In normal mode, display of comfort indicator.

Autres manuels pour Wireless Weather Station

Table des matières

Autres manuels La Crosse Technology Station météorologique

La Crosse Technology

La Crosse Technology WS-2812-IT Fiche technique

La Crosse Technology

La Crosse Technology Wireless Weather Station Manuel utilisateur

La Crosse Technology

La Crosse Technology 308-1415V3 Manuel utilisateur

La Crosse Technology

La Crosse Technology WS-7136U Manuel utilisateur

La Crosse Technology

La Crosse Technology C84343 Manuel d'utilisation et d'entretien

La Crosse Technology

La Crosse Technology WS-9611U-IT Manuel

La Crosse Technology

La Crosse Technology WS-2510 Manuel utilisateur

La Crosse Technology

La Crosse Technology LTV-D1 Manuel utilisateur

La Crosse Technology

La Crosse Technology TX141TH-BCH Manuel utilisateur

La Crosse Technology

La Crosse Technology WS-9009U Manuel utilisateur

La Crosse Technology

La Crosse Technology S88907V2 Manuel utilisateur

La Crosse Technology

La Crosse Technology 9245 Manuel utilisateur

La Crosse Technology

La Crosse Technology C86234 Dimensions

La Crosse Technology

La Crosse Technology WS-9016TWC Manuel utilisateur

La Crosse Technology

La Crosse Technology WS 550 US Manuel utilisateur

La Crosse Technology

La Crosse Technology T83653v2 Manuel utilisateur

La Crosse Technology

La Crosse Technology WS2307 Manuel utilisateur

La Crosse Technology

La Crosse Technology WS-9055TWC Manuel utilisateur

La Crosse Technology

La Crosse Technology WS1506 Manuel utilisateur

La Crosse Technology

La Crosse Technology WS-9013U Manuel utilisateur

La Crosse Technology

La Crosse Technology WW85784 Manuel d'utilisation et d'entretien

La Crosse Technology

La Crosse Technology WW85777v2 Manuel d'utilisation et d'entretien

La Crosse Technology

La Crosse Technology V30V2 Dimensions

La Crosse Technology

La Crosse Technology C87030 Manuel utilisateur

Manuels Station météorologique populaires d'autres marques

Auriol

Auriol AHFL 433 A1 Manuel utilisateur

NexSens

NexSens G2-HYDROMET Manuel utilisateur

Hyundai

Hyundai WS 2202 Manuel utilisateur

IROX

IROX HBVR761 UV-X Manuel utilisateur

ADE

ADE WS 1711 Manuel utilisateur

Auriol

Auriol z29592 Manuel utilisateur

Auriol

Auriol 296289 Manuel utilisateur

Hyundai

Hyundai WS 2266 Manuel utilisateur

Ventus

Ventus W177 Manuel utilisateur

National Geographic

National Geographic VA Colour RC Manuel utilisateur

Renkforce

Renkforce 1208067 Manuel utilisateur

Levenhuk

Levenhuk Discovery Report WA40 Manuel utilisateur

Instant Transmission

Instant Transmission MA 10410 Manuel utilisateur

Lutron Electronics

Lutron Electronics PHB-318 Manuel utilisateur

WAREMA

WAREMA EWFS Weather station eco Manuel utilisateur

TFA

TFA 30.3013.IT Manuel utilisateur

Alecto

Alecto WS-1200 Manuel utilisateur

Oregon Scientific

Oregon Scientific RMR966PA Manuel utilisateur