La Crosse Technology K84377 Dimensions
La Crosse Technology, Ltd. Page 1
K84377 FAQS
The links below will work in most PDF viewers and link to the topic area by clicking
the link. We recommend Adobe Reader version 10 or greater available at:
http://get.adobe.com/reader
TABLE OF CONTENTS
K84377 FAQS ....................................................................................................................... 1
Battery ..................................................................................................................................... 1
Initial Setup............................................................................................................................. 1
Thermometer Factory Restart.............................................................................................. 2
Window Thermometer ...................................................................................................... 2
Power requirements ........................................................................................................... 2
Set Time............................................................................................................................... 2
Can I view temperature in Celsius?................................................................................. 2
MIN/MAX Temperature ...................................................................................................... 2
Dashes, OF.L or stuck Temperature................................................................................ 2
Thermometer has a Distorted Display............................................................................ 4
Thermometer has missing segments.............................................................................. 4
Thermometer is Blank: No letters, numbers or dashed lines..................................... 4
Battery
Half of all warranty issues can be resolved with fresh battery of the appropriate
voltage.
We suggest name brand alkaline battery.
Initial Setup
1. Remove the mounting holder and transparent cover from the LCD.
2. Hold the white grips on the side of the LCD and carefully remove it from the white case.
Note: Do not touch the LCD directly.
3. Remove the plastic safety strip, preventing the battery from making contact. Insert the LR44
button cell battery with the +side facing up.
4. Remove the protective scratch guard from the LCD.
5. Set time and date (see program menu).
6. Slide the IN/OUT switch to select indoor or outdoor use.
7. Carefully put the LCD back into the white case (circuit board will face the back, buttons will
face the front).
8. Replace the transparent cover over the LCD. Press firmly to secure it to the white case.
La Crosse Technology, Ltd. Page 2
Thermometer Factory Restart
1. Remove the battery for 15 minutes.
2. Press one of the buttons at least 20 times to clear all memory.
3. Insert a fresh battery into the thermometer.
4. Do not press buttons for 15 minutes.
Window Thermometer
Power requirements
1 LR44 button cell battery.
Set Time
1. Carefully remove LCD from the white case.
2. Hold the MODE button until the hours flash.
3. Press and release the + button to adjust the hours.
4. Press and release the MODE button and the minutes will flash.
5. Press and release the + button to adjust the minutes.
6. Press the MODE button to return to the temperature display.
Note: The time must be set for the Min/Max temperature to work properly. If you
do not exit the program menu, the display will stay in program mode and not show
the temperature.
Can I view temperature in Celsius?
This station reads in Fahrenheit only.
MIN/MAX Temperature
The station shows the high/low temperature for the past 24 hours.
•The minimum temperature automatically resets at 8:00 P.M.
•The maximum temperature automatically resets at 8:00 A.M.
•If the time is not set, the minimum and maximum temperatures will not reset at
the correct local time or may read dashes (---).
Dashes, OF.L or stuck Temperature
This is generally a power related issue.
Battery may be overpowered or underpowered. Remove battery from wireless
thermometer.
Press any button 20 times. Leave the thermometer unpowered for 1-2 hours.
Install fresh alkaline battery with correct polarity.
If the indoor temperature is still dashes or OF.L, the thermometer may need
replacement.
La Crosse Technology, Ltd. Page 3
Mount on Window
Indoor Use:
1. Remove the window thermometer from the mounting holder.
2. Clean and dry the area to mount the window thermometer so the adhesive will
stick.
3. Remove the thin cover from the adhesive to reveal the sticky side.
4. Carefully place the mounting holder with the opening facing up.
5. Insert the window thermometer.
Outdoor Use:
1. Choose an outdoor window location that is fairly dry and shaded for accurate
readings.
2. Remove the window thermometer from the mounting holder.
3. Clean and dry the area to mount the window thermometer so the adhesive will
stick.
4. Remove the thin cover from the adhesive to reveal the sticky side.
5. Carefully place the mounting holder with the opening facing up.
6. Insert the window thermometer.
•Avoid direct sunshine, as it will cause false high temperature readings.
•Constant direct sunlight may fade the LCD, making it difficult to read.
•Due to the heat emission and sheltered location of your window, the
temperature may read higher with a window-mounted location then at a free
unsheltered location outside.
Remove from Window
The adhesive used to secure the thermometer is very strong and elastic. The best
way to remove the holder from the window is with a flat blade and patience.
Remove the window thermometer from the holder.
Gently slide a flat blade beneath one end of the holder. Lift slowly and gently
allowing the adhesive to slowly stretch and finally release from the window.
Repeat the process on the other side.
This takes several minutes to accomplish. Be careful not to damage the window.
New adhesive will be required to remount. Check in your local hardware store.
Accuracy
Since no window is a perfect insulator, it is possible that this temperature skew is
caused by heat leakage through the window pane.
To double-check the accuracy of the thermometer, remove it from the mounting
bracket (leave the bracket attached to the window), bring it indoors for two
hours, and set it next to the thermostat.
If it is within 2-3 degrees, the thermometer is working correctly. If the
temperature gap is greater than 3 degrees after 2 hours, the window
thermometer may be defective.
La Crosse Technology, Ltd. Page 4
Is the thermometer mounted in a shady location?
Is the temperature incorrect at night as well as during the day?
Thermometer has a Distorted Display.
On a brand new Wireless Thermometer, check for thin plastic films of printed
scratch guard that may be on the screen of the wireless thermometer. This thin
piece of plastic has printed numbers for store displays.
With all power removed, the thermometer should be blank.
If numbers still appear, please check for scratch guard.
Check that the battery are installed correctly.
Battery may be overpowered or underpowered.
Remove battery from Wireless Thermometer.
Press any button 20 times. Leave the battery out of the display for 2 hours.
Insert fresh battery into the wireless thermometer.
Thermometer has missing segments.
This is generally a power related issue.
Check that the battery are installed correctly.
Battery may be overpowered or underpowered.
Remove battery from wireless thermometer.
Press any button 20 times. Leave the battery out of the display for 2 hours.
Insert fresh battery into the wireless thermometer.
Thermometer is Blank: No letters, numbers or dashed lines.
Check that the battery are installed correctly.
Battery may be overpowered or underpowered.
Remove battery from wireless thermometer.
Press any button 20 times. Leave the battery out of the display for 2 hours.
Insert fresh battery into the wireless thermometer.
Table des matières
Autres manuels La Crosse Technology Thermomètre
La Crosse Technology
La Crosse Technology WT-1025 Manuel utilisateur
La Crosse Technology
La Crosse Technology WT-62U Manuel utilisateur
La Crosse Technology
La Crosse Technology 314-152 Manuel utilisateur
La Crosse Technology
La Crosse Technology LTV-POOL Manuel utilisateur
La Crosse Technology
La Crosse Technology 308-1410GRV2 Manuel utilisateur
La Crosse Technology
La Crosse Technology T83622 Manuel utilisateur
La Crosse Technology
La Crosse Technology INFRASCAN IR 101 Manuel utilisateur
La Crosse Technology
La Crosse Technology 306-645 Manuel
La Crosse Technology
La Crosse Technology 914-604 Dimensions
La Crosse Technology
La Crosse Technology 314-152-BL Manuel utilisateur
La Crosse Technology
La Crosse Technology 308-147 Dimensions
La Crosse Technology
La Crosse Technology 914-604 Manuel utilisateur
La Crosse Technology
La Crosse Technology K84377 Manuel utilisateur
La Crosse Technology
La Crosse Technology INFRASCAN IR 101 Manuel utilisateur
La Crosse Technology
La Crosse Technology 308-1910 Manuel utilisateur
La Crosse Technology
La Crosse Technology 308-1410GR Manuel utilisateur
La Crosse Technology
La Crosse Technology 314-152B Manuel utilisateur
La Crosse Technology
La Crosse Technology WS-7016U Manuel utilisateur
La Crosse Technology
La Crosse Technology 308-1410GRv2 Manuel utilisateur
La Crosse Technology
La Crosse Technology 308-1409BTV4 Manuel utilisateur
