Kyocera Mita DP-2800 Manuel

INSTRUCTION HANDBOOK

Laser Printer

The DP-2800plus in this photograph is equipped with two optional paper feeders

(ST-1000) and an optional document finisher (F-8118).

Please read the instruction handbook before using the printer. Keep it close to the

printer for easy reference.

introduction

Please read the instruction handbook before using the

printer. Keep it close to the printer for easy reference.

The sections of this handbook and parts of the printer marked with

symbols are safety warnings meant to protect the user, other individuals

and surrounding objects, and ensure correct and safe usage of the printer.

The symbols and their meanings are indicated below.

DANGER: Indicates that serious injury or even death will very possibly

result from insufficient attention to or incorrect compliance with the related

points.

WARNING: Indicates that serious injury or even death may result from

insufficient attention to or incorrect compliance with the related points.

CAUTION: Indicates that personal injury or mechanical damage may

result from insufficient attention to or incorrect compliance with the related

points.

Symbols

The

symbol indicates that the related section includes safety warnings.

Specific points of attention are indicated inside the symbol.

...........[General warning]

...........[Warning of danger of electrical shock]

...........[Warning of high temperature]

The symbol indicates that the related section includes information on

prohibited actions. Specifics of the prohibited action are indicated inside

the symbol.

...........[Warning of prohibited action]

...........[Disassembly prohibited]

The ●symbol indicates that the related section includes information on

actions which must be performed. Specifics of the required action are

indicated inside the symbol.

...........[Alert of required action]

...........[Remove the power plug from the outlet]

...........[Always connect the printer to an outlet with

a ground connection]

Please contact your service representative to order a replacement if the

safety warnings in the handbook are illegible or if the handbook itself is

missing. (fee required)

Introduction

Caution NO LIABILITY IS ASSUMED FOR ANY DAMAGE CAUSED BY IMPROPER INSTALLATION.

Notice on Software_____________________________________________________________________________________

SOFTWARE USED WITH THIS PRINTER MUST SUPPORT THE PRINTER’S NATIVE MODE OR ONE OF ITS EMULATION MODES. The

printer is factory set to emulate the HP LJ 5M/5Si. The emulation mode can be changed by following the procedures described in Chapter 2.

Notice _______________________________________________________________________________________________

The information in this manual is subject to change without notification. Additional pages may be inserted in future editions. The user is asked to

excuse any technical inaccuracies or typographical errors in the present edition.

No responsibility is assumed if accidents occur while the user is following the instructions in this manual. No responsibility is assumed for defects in

the printer’s firmware (contents of its read-only memory).

This manual, any copyrightable subject matter sold or provided with or in connection with the sale of the page printer, are protected by copyright. All

rights are reserved. Copying or other reproduction of all or part of this manual, any copyrightable subject matter without the prior written consent of our

company is prohibited. Any copies made of all or part of this manual, any copyrightable subject must contain the same copyright notice as the material

from which the copying is done.

Regarding Tradenames _________________________________________________________________________________

PRESCRIBE is a registered trademark of Kyocera Corporation. PRESCRIBE 2, PRESCRIBE 2e, KPDL, and KIR are trademarks of Kyocera

Corporation.

Diablo 630 is a product of Xerox Corporation. IBM Proprinter X24E is a product of International Business Machines Corporation. EPSON LQ-850 is

a product of Seiko Epson Corporation. HP LaserJet 5Si and HP LaserJet 5M are products of Hewlett-Packard Company. Hewlett-Packard, PCL,

and PJL are registered trademarks of Hewlett-Packard Company. Centronics is a trade name of Centronics Data Computer Corp. PostScript is a

registered trademark of Adobe Systems Incorporated. Microsoft and Windows are registered trademarks of Microsoft Corporation.

This page printer uses PeerlessPrint5 and PeerlessPrintXL to provide the HP LaserJet compatible PCL5 language (PeerlessPrint5) and PCL6

language (PeerlessPrintXL) emulations. PeerlessPrint5 and PeerlessPrintXL are trademarks of The Peerless Group, Redondo Beach, CA

90278, U.S.A.

This product was developed using the Tornado™ Real Time Operating System and Tools from Wind River Systems.

Introduction

iii

IBM PROGRAM LICENSE AGREEMENT ____________________________________________________________________

THE DEVICE YOU HAVE PURCHASED CONTAINS ONE OR MORE SOFTWARE PROGRAMS (“PROGRAMS”) WHICH BELONG TO

INTERNATIONAL BUSINESS MACHINES CORPORATION (“IBM”). THIS DOCUMENT DEFINES THE TERMS AND CONDITIONS UNDER

WHICH THE SOFTWARE IS BEING LICENSED TO YOU BY IBM. IF YOU DO NOT AGREE WITH THE TERMS AND CONDITIONS OF THIS

LICENSE, THEN WITHIN 14 DAYS AFTER YOUR ACQUISITION OF THE DEVICE YOU MAY RETURN THE DEVICE FOR A FULL REFUND.

IF YOU DO NOT SO RETURN THE DEVICE WITHIN THE 14 DAYS, THEN YOU WILL BE ASSUMED TO HAVE AGREED TO THESE TERMS

AND CONDITIONS.

The Programs are licensed not sold. IBM, or the applicable IBM country organization, grants you a license for the Programs only in the country

where you acquired the Programs. You obtain no rights other than those granted you under this license.

The term “Programs”means the original and all whole or partial copies of it, including modified copies or portions merged into other programs. IBM

retains title to the Programs. IBM owns, or has licensed from the owner, copyrights in the Programs.

1. License

Under this license, you may use the Programs only with the device on which they are installed and transfer possession of the Programs and

the device to another party.

If you transfer the Programs, you must transfer a copy of this license and any other documentation to the other party. Your license is then

terminated. The other party agrees to these terms and conditions by its first use of the Program.

You may not:

1) use, copy, modify, merge, or transfer copies of the Program except as provided in this license;

2) reverse assemble or reverse compile the Program; or

3) sublicense, rent, lease, or assign the Program.

2. Limited Warranty

The Programs are provided “AS IS”.

THERE ARE NO OTHER WARRANTIES COVERING THE PROGRAMS (OR CONDITIONS), EXPRESS OR IMPLIED, INCLUDING, BUT NOT

LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Some jurisdictions do not allow the exclusion of implied warranties, so the above exclusion may not apply to you.

SUPPLEMENT TO AGREEMENT FOR SOFTWARE BUNDLING AND DISTRIBUTION FOR ALDC

Introduction

3. Limitation of Remedies

IBM’s entire liability under this license is the following;

1) For any claim (including fundamental breach), in any form, related in any way to this license, IBM’s liability will be for actual damages only and will

be limited to the greater of:

a) the equivalent of U.S. $25,000 in your local currency; or

b) IBM’s then generally available license fee for the Program

This limitation will not apply to claims for bodily injury or damages to real or tangible personal property for which IBM is legally liable.

IBM will not be liable for any lost profits, lost savings, or any incidental damages or other economic consequential damages, even if IBM, or its

authorized supplier, has been advised of the possibility of such damages. IBM will not be liable for any damages claimed by you based on any third

party claim.This limitation of remedies also applies to any developer of Programs supplied to IBM.IBM’s and the developer’s limitations of remedies

are not cumulative.Such developer is an intended beneficiary of this Section.Some jurisdictions do not allow these limitations or exclusions, so they

may not apply to you.

4. General

You may terminate your license at any time. IBM may terminate your license if you fail to comply with the terms and conditions of this license. In

either event, you must destroy all your copies of the Program. You are responsible for payment of any taxes, including personal property taxes,

resulting from this license. Neither party may bring an action, regardless of form, more than two years after the cause of action arose. If you acquired

the Program in the United States, this license is governed by the laws of the State of New York. If you acquired the Program in Canada, this license

is governed by the laws of the Province of Ontario. Otherwise, this license is governed by the laws of the country in which you acquired

the Program.

Introduction

Typeface Trademark Acknowledgement _____________________________________________________________________

All resident fonts in this printer are licensed from Bitstream Inc., Cambridge, Massachusetts, U.S.A.

Dutch801, Swiss742, Incised901, ZapfCalligraphic801, ZapfHumanist601, OriginalGaramond, and Chianti are trademarks of Bitstream Inc.

Century Schoolbook, Stymie, and Cooper-Black are trademarks of Kingsley-ATF Type Corporation.

ITC Avant Garde, ITC Benguiat, ITC Bookman, ITC Souvenir, ITC Zapf Chancery, and ITC ZapfDingbats are registered trademarks of International

Typeface Corporation.

Revue is a trademark of Esselte Pendaflex Corporation in the U.S., Letraset Canada Ltd. in Canada, and Esselte Letraset Ltd. elsewhere.

Bitstream Sublicense Agreement __________________________________________________________________________

FONTWARE/TrueDoc developed by BITSTREAM INC. is provided as part of this Printer by our company under license.

We, as a Licensee of BITSTREAM, grants you, the Sublicensee, non-exclusive right to use FONTWARE/TrueDoc installed in this Printer, if you

agree to and at all times comply with the following items:

1. Ownership

As the Sublicensee, you own the Printer in which FONTWARE/TrueDoc is originally installed, but BITSTREAM retains title to and ownership in the

software program of FONTWARE/TrueDoc. The Sublicense is not a sale of the original software program of FONTWARE/TrueDoc or any

portion or copy of it.

2. Copy Restrictions

FONTWARE/TrueDoc is copyrighted. Unauthorized copying of FONTWARE/TrueDoc even if modified, merged, or included with other software, is

expressly forbidden. You may be held legally responsible for any copyright in-fringement.

3. Unauthorized Use

FONTWARE/TrueDoc may not be removed, disclosed and transferred to any third party for any length of time without the prior written consent of our

company or BITSTREAM. Also, you may not modify, adapt, translate, reverse engineer, decompile, or create derivative works based on

FONTWARE/TrueDoc.

4. Term

This agreement should remain in full force and effect forever thereby allowing the Sublicensee to use the FONTWARE/TrueDoc forever unless

the Sublicensee violates the terms of paragraphs 2. or 3. above. In the event of such violation, this agreement will terminate automatically

without notice from us. Upon termination, you should destroy FONTWARE/TrueDoc and all copies of them, in part and in whole, including

modified copies, if any.

Introduction

FCC statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

·Reorient or relocate the receiving antenna.

·Increase the separation between the equipment and receiver.

·Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

·Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the manufacturer for compliance could void the

user’s authority to operate the equipment.

Shielded circular cable should be used for interfacing with the computer.

Caution to user

Any modification without prior permission may cause harmful interference.

If any modification/change is introduced to this equipment without prior permission, we as the

manufacturer cannot guarantee compliance with FCC rules.

To use equipment which does not comply with FCC rules is prohibited.

Introduction

vii

The printer may be optionally installed with the following options:

Conforming to the Class B limits

·ST-1000 Paper Feeder (500 sheets)

·EF-100 Envelope Feeder

·UF-100 Universal Feeder

·AD-31 Duplexer

·F-8130 Bulk Paper Stacker (3000 sheets)

·AS-M8111 Mail Box/Sorter

·F-8118 Document Finisher (1800 sheets)

·HD-201 Hard Disk Unit

·Barcord Reader DP-28/3600 Series

Introduction

viii

Interface connectors

Important note on the interface connectors

Be sure to turn off printer power before connecting or disconnecting an interface cable* to the printer.

For protection against static discharge which may be applied to the printer’s internal electronics through

the interface connector(s), keep any interface connector which is not in use capped using the protective

cap supplied.

* Use shielded interface cable.

Safety information

Laser safety

This printer is certified as a Class 1 laser product under the U.S. Department of Health and Human

Services (DHHS) Radiation Performance Standard according to Radiation Control for Health and

Safety Act of 1968. This means that the printer does not produce hazardous laser radiation. Since

radiation emitted inside the printer is completely confined within protective housings and external

covers, the laser beam cannot escape from the printer during any phase of user operation.

Laser notice

This printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR Subchapter for

Class I (1) laser products, and elsewhere is certified as a Class I laser product conforming to the

requirements of IEC 825.

Introduction

Laser radiation when open. DO NOT STARE INTO BEAM OR VIEW DIRECTLY WITH OPTICAL

INSTRUMENTS.

*Use of controls or adjustments or performance of procedures other than those specified

herein may result in hazardous radiation exposure.

(U.S.A./Canada)

CAUTION

Laser radiation when open. DO NOT STARE INTO BEAM OR VIEW

DIRECTLY WITH OPTICAL INSTRUMENTS.

Table des matières

Autres manuels Kyocera Mita Imprimante

Kyocera Mita

Kyocera Mita Ecosys FS-1000+ Manuel utilisateur

Kyocera Mita

Kyocera Mita S-9100DN Manuel utilisateur

Kyocera Mita

Kyocera Mita Ecosys FS-6020 Manuel utilisateur

Kyocera Mita

Kyocera Mita KM-P4850w Manuel utilisateur

Kyocera Mita

Kyocera Mita FS-C5016N Manuel utilisateur

Kyocera Mita

Kyocera Mita Ecosys FS-1800 Manuel utilisateur

Kyocera Mita

Kyocera Mita Ecosys FS-1800+ Manuel utilisateur

Kyocera Mita

Kyocera Mita FS-8000CD Manuel utilisateur

Kyocera Mita

Kyocera Mita FS 8000C - Color Laser Printer Manuel utilisateur

Kyocera Mita

Kyocera Mita FS-9500DN Manuel utilisateur

Kyocera Mita

Kyocera Mita KM-P4845w Manuel utilisateur

Kyocera Mita

Kyocera Mita FS-6750 Manuel utilisateur

Kyocera Mita

Kyocera Mita KM-4530 Manuel utilisateur

Kyocera Mita

Kyocera Mita FS-C5016N Manuel utilisateur

Kyocera Mita

Kyocera Mita FS-C5016N Manuel utilisateur

Kyocera Mita

Kyocera Mita Ecosys FS-6020 Manuel utilisateur

Kyocera Mita

Kyocera Mita FS-9100DN Manuel utilisateur

Kyocera Mita

Kyocera Mita KM-1505 Manuel utilisateur

Kyocera Mita

Kyocera Mita Ecosys FS-C8008DN Series Manuel utilisateur

Kyocera Mita

Kyocera Mita Ecosys FS-1900 Manuel utilisateur

Kyocera Mita

Kyocera Mita KM-P4845w Manuel utilisateur

Kyocera Mita

Kyocera Mita FS-C5016N Manuel utilisateur

Kyocera Mita

Kyocera Mita Ecosys FS-1800N Manuel utilisateur

Kyocera Mita

Kyocera Mita Ecosys FS-C8008DN Series Manuel utilisateur

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Canon

Canon i70 Series Manuel utilisateur

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Canon

Canon LASER SHOT LBP-1210 Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Canon

Canon PIXMA PRO-1 Series Manuel utilisateur

Canon

Canon PIXMA G3560 Guide de configuration

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Epson

Epson ET-7750 Mode d'emploi

Canon

Canon CLBR 460ps Manuel utilisateur

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Epson

Epson SC-F7100 series Manuel utilisateur

Epson

Epson Stylus C40UX Manuel utilisateur

Canon

Canon imagePASS-A2 Manuel utilisateur

Canon

Canon S820D Manuel utilisateur