KVM-TEC KT-6851 Manuel utilisateur

2 | kvm-tec Misprints, errors and technical changes reserved Misprints, errors and technical changes reserved
WHY KVM-TEC
gateway
The kvm-tec connection to virtual machines
kvm-tec Gateway - the perfect combination of a Real-Time KVM system and
a exible remote desktop system. The gateway has the function of a thin
client and in combination with MX Local Extender is the ideal combination
with virtual machines in the switching system. With the kvm-tec gateway it is
possible to connect to virtual machines or remote PCs outside the switching
network.
A gateway can connect to virtual machines. 4 Login credentials can be stored
and retrieved by hotkey... In addition to your Real-Time Switching system,
the kvm-tec gateway can be used to access the virtual machines.
Easy installation - rst connect the remote unit, then select the RDP protocol
on the kvm-tec gateway, further enter the login data and connect to the
desired PC.
RDP and VNC are used as standard. Other protocols on request.
Access to virtual
machines in addition
to your Real Time
switching system
Connection to a
PC via RDP/ VNC with
MX Local
gateway powered
by DEBIAN
RDP and VNC standard
intuitive user interface
Virtual
Machines
flexline
www.kvm-tec.com

kvm-tec | 3
Misprints, errors and technical changes reserved Misprints, errors and technical changes reserved
IN THIS GUIDE
1. Introduction 5
1.1 Intended Use 5
1.2 Safety Instructions 6
1.3 Technical Spezications 8
1.4 About the product - Gateway 9
1.5 About the Status LED 10
1.6 Unpacking and checking the contents 11
1.7 Mounting options 11
1.7.1 Mounting pads and rubber feet 11
2. Installation of the extender 12
2.1 Installing the extender 12
2.2 Quickinstallation Gateway 13
2.3 Operation, Adding General 14
2.4 Operation for RDP 15
2.5 Operation for VNC 16
2.6 Editing a saved connection 17
2.7 Sorting the saved connections 19
2.8 Deleting a saved connection 20
2.9 Quick Favoriting 21
2.10 Connect 22
3. Congure the Extender 23

4 | kvm-tec Misprints, errors and technical changes reserved Misprints, errors and technical changes reserved
IN THIS GUIDE
3.1 Features 23
3.2 Apps 23
3.3 Update 24
3.4 Settings 26
3.5 Exit 26
3.6 Close RDP connection 27
3.7 Close VNC connection 27
3.8 Using the OSD for Gateway connections 28
4. Maintance & Care 30
4.1 Extender care 30
4.2. Disposal 30
5. Warranty 31
5.1. Standard warranty 31
5.2 Extended warranty 31
6. Cable requirements 32
6.1 Requirements for CAT5e/6/7 cables 32
7. Requirements network-switch 33
8. Contacts & phone / emails 34
9. Notes 35

kvm-tec | 5
Misprints, errors and technical changes reserved Misprints, errors and technical changes reserved
1. INTRODUCTION
5 | kvm-tec
1. INTRODUCTION
Congratulations on the purchase of your new Gateway KVM Extender. You have bought
a high quality extender. These instructions are part of this product. They contain
important information regarding safety, use and disposal for every user of the Gateway
KVM Extender. Please familiarise yourself with the information within prior to using
your product. Use the product only in the manner as described and for the areas of
application as stated. When passing the product to a third party be sure to also supply all
instructions and other relevant documentation. Following proper use and maintenance,
your Gateway KVM Extender will bring you joy for many years to come.
1.1 INTENDED USE
The kvmtec gateway offers the possibility to connect a PC to a KVM network via a RDP or VNC
remote desktop connection. The gateway is a Linux based device that runs with Debian as
operating system and Free RDP as connection client.
WARNING The device may only be opened by an authorized technician. Danger of electric
shock!

6 | kvm-tec Misprints, errors and technical changes reserved Misprints, errors and technical changes reserved
1. INTRODUCTION
1.2 SAFETY INSTRUCTIONS
WARNING! Read and understand all safety instructions.
• Follow all the instructions. This will avoid accidents, re, explosions, electric shocks or
other hazards that may result in damage to property and/or severe or fatal injuries.
Please ensure that everyone who uses the product has read and followed these warnings
and instructions.
• Keep all safety information and instructions for future reference and pass them on to
subsequent users of the product.
• The manufacturer is not liable for cases of material damage or personal injury caused
by incorrect handling or non-compliance with the safety instructions. In such cases, the
warranty will be voided.
• This product is not intended for use by persons (including children) with restricted
physical, sensory or intellectual capability or lack of experience and/or knowledge, unless
they are supervised by a person who is responsible for their safety or provides them with
instructions on how to use the product.
• DANGER! Not for use in potentially explosive environments.
• DANGER! Be vigilant at all times, and always take care around this product. Do not use
electrical equipment if you are lacking in concentration or awareness, or are under the
inuence of drugs, alcohol or medication. Even a moment of inattentiveness can lead to
serious accidents and injuries when using electrical equipment. Check the product and
the cables for any damage before use. If there is any visible damage, a strong odour, or
excessive overheating of components unplug all the connections immediately and stop
using the product.
• If the product is not installed and used in accordance with this manual, it may cause
disruptive interference with radio or television reception or affect other electronic
products in residential areas.
• Use shielded cables only to connect the components in order to avoid such interference.
Non-compliance invalidates the permission to operate this product.
• Only the mains adapter included with the product should be used as the power supply.
Do not use other adapters.
• Prior to connecting to the mains, make sure your local mains voltage matches the rating
indicated on the product.
• The product must be connected to a permanent and earthed AC wall socket.

kvm-tec | 7
Misprints, errors and technical changes reserved Misprints, errors and technical changes reserved
1. INTRODUCTION
• Protect cables from being strained, pinched or buckled and place them in a way to
prevent people from tripping over the cord.
• In particular, ensure to avoid damage to the mains adapter.
• Use the product with a suitable, properly installed and easily accessible mains power
socket. Make sure the product can be disconnected from the power socket at all times.
• Unplug the product during electrical storms or when not in use.
• DANGER! Never touch the adapter with wet hands.
• Use the product within the specied performance limits.
• Keep the product away from ammable materials such as curtains and drapes.
• Protect the mains adapter from use by third parties (particularly children). Keep the
unused mains adapter in a dry, elevated or locked location away from children.
• Do not place the product near heaters.
• Do not drop or hit the product.
• Unplug all connections before cleaning the product. Do not use wipes or chemicals
as these could damage the surface. Wipe the housing with a damp cloth. Electrical/
electronic parts must not be cleaned.
• Alterations to the product and technical modications are not permitted.

8 | kvm-tec Misprints, errors and technical changes reserved Misprints, errors and technical changes reserved
1. INTRODUCTION
1.3 TECHNICAL SPEZIFICATIONS
Typ: KVM Gateway local/CPU Unit
Modell: kvm-GW KVM Extender
Voltage supply: 12V
Power supply 12VDC1A, external power supply
Operation enironment: 0 ºC to 45 ºC / /32 to 113 °F
Storage environment -25ºC to 80 / /-13 to 176 °F
Relative Luftfeuchtigkeit: max. 80% (non condensing )
Humidity for storage: max. 80% (non condensing)
Housing material: anodized aluminum
Dimension: 198 x 40 x 103,5 mm/ 7.79 x 1.57 x 4.03 inch
Weight: 604 g/1.33 lb Local/CPU
MTBF 82 820 calculated hours / 10 years

kvm-tec | 9
Misprints, errors and technical changes reserved Misprints, errors and technical changes reserved
1. INTRODUCTION
1.4 ABOUT THE PRODUCT - GATEWAY
1. power/status LED display RDP/VNC Status
2. DC connection for 12V/1A power supply
3. LAN connection to LAN
4. reset button for reset
5. kvm-link connection for CAT X cable to
KVM network
6. power/status LED display the extender status

10 | kvm-tec Misprints, errors and technical changes reserved Misprints, errors and technical changes reserved
1. INTRODUCTION
1.5 ABOUT THE STATUS LED
LED Status Update:
Color Light display Autoupdate Mode
fast ashing Update runs
shining Update failed
shining Update successful
Bedeutung LED Anzeigen
Color Light display Description
shining only network connection available
fast ashing no active connection
shining no video signal
shining everything works
A detailed error description can be found in chapter First Aid
Table des matières
Autres manuels KVM-TEC Porte
Manuels Porte populaires d'autres marques

LST
LST M500RFE-AS Manuel utilisateur

Kinnex
Kinnex Media Gateway Manuel utilisateur

2N Telekomunikace
2N Telekomunikace 2N StarGate Manuel utilisateur

Mitsubishi Heavy Industries
Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuel utilisateur

ZyXEL Communications
ZyXEL Communications ZYWALL2 ET 2WE Manuel utilisateur

Telsey
Telsey CPVA 500 - SIP Manuel utilisateur













