Krups KB790 Manuel utilisateur

B790 www.krups.com

fig.1 fig.2

fig.3 fig.4

English

DESCRIPTION

ADie cast base

BControl panel

b1 - Stop button

b2 - Slow speed

b3 - speed 1

b4 - speed 2

b5 - speed 3

b6 - speed 4

b7 - Ice crush function

b8 - Vari-Pulse function

CCord storage

DBlender jar assembly

d1 - Locking ring base

d2 - Removable blade assembly

d3 - Seal

d4 - Graduated 60oz glass jar

EBlender jar lid

FBlender jar stopper, 2,5 oz

GFood chopper accessory (available in limited RUPS Service Centers)

USING YOUR APPLIANCE

■Before first use, wash the blender jar, lid, and lid stopper in warm soapy

water. Rinse and dry carefully. Never immerse the base of the appliance

in water or put it under running water.

■The blender jar is made of borosilicate glass, which is thermal-shock and

scratch resistant. As a result, both hot and cold foods can be prepared in

the blender jar. However, when blending hot foods,

always ensure that the lid stopper is loosened to allow steam to

escape. Always double-check that the lid is correctly locked in place be-

fore processing to prevent injury, and allow boiling hot

liquids to cool before blending. Temperature should not exceed 212°F

English

■Place the ring seal (d3) onto the base of the removable blade

carrier (d2) (diagram 1).

■Press the assembly (d2 + d3) down into the locking ring base (d1).

It will click into place.

■Hold this assembly upside down (locking ring base + blade

assembly + seal) and place it onto the glass jar, which has to be held

upside down too (diagram 2). Take care to ensure that the glass

knobs of the jar (there are two of them) fit into the grooves in the locking

ring base (diagram 2).

■Hold the locking ring base (d1) firmly and give the glass jar a

quarter turn to lock it in place (diagram 2). For your safety, the set-

ting up and dismantling of the base (d2 + d3) on the bowl (d4) are

possible only in the inverted position.

■Place the assembled blender jar (D) onto the metal base (A). There

are two possible positions: the jar handle can be in the left or right of

the control panel (B). For your own safety, the blender will not start un-

less it is correctly assembled and positioned on the metal base.

■Place the ingredients to be blended in the jar. Take note of the

following maximum levels:

- 60 oz for thick mixtures

- 50 oz for very liquid mixtures

- 6 to 8 large (1/3L or 3 cups max) ice cubes for ice crush.

■Insert the lid stopper in the lid. Place the lid on the jar and twist coun-

ter-clockwise to lock the lid in place (diagram 3).

■Plug in the appliance. To begin blending, choose a function or speed.

To stop blending at any time, press OFF.

Blending speed options are Slow – 1 – 2 – 3 – 4. (Slow is the lowest speed,

4 is the highest speed).

Start on Slow (b2) and then gradually increase to the desired speed. The

selected speed button will light up. To stop processing at any time,

press OFF (the indicator light for the speed selected will go out).

OTE: The Slow speed can also be used to mix in

solid ingredients that you do not wish to process,

such as adding chocolate chips or nuts after blending

a batter.

English

Always ensure the lid is securely locked in place while the

blender is in use. To add ingredients while blending, carefully

remove the lid stopper from the center of the lid and add

ingredients through the opening. Replace the lid stopper

once ingredients have been added.

Always stop blending and unplug the appliance before

removing the blender lid. ever remove the blender jar from

the base until the blades have come to a complete stop.

SPEED – SUGGESTED FOODS

Slow To foam milkshakes or smoothies after fruits have been

blended. Blending powdered drink mixes with water. Folding li-

quid ingredients such as homemade mayonnaise. Mixing solid in-

gredients into a liquid without processing (e.g. adding chocolate

chips to a pancake mix)

V1 Blending softer foods such as chickpeas for hummus.

Mixing vegetable dips, preparing salad dressings

V2 Chopping small quantities of foods such as onions or nuts,

crushing graham crackers

V3 Blending batters for pancakes or waffles, preparing fresh

guacamole or salsa, puree cooked fruits or vegetables.

V4 Pureeing raw, uncooked fruits and vegetables into liquids.

VARI-PULSE FU CTIO

The Vari-Pulse function allows for more precise control over the

degree of blending.

■Vari-Pulse can be selected for any speed from Slow to 4.

■Note that Vari-Pulse cannot be used with Ice Crush as it is already a

pulsing function.

■To use Vari-Pulse, push the Vari-Pulse button first. The button will blink

to show it has been selected. Then push the button for the desired

speed (select from Slow – 1 – 2 – 3 – 4) and hold it down.

Blending will continue as long as the button is pushed, release the but-

ton to stop blending.

English

■To turn off the Vari-Pulse function, press OFF (the indicator light will go

out).

■Always stop blending and unplug the appliance before removing the

blender lid. Never remove the blender jar from the base until the blades

have come to a complete stop.

ICE-CRUSH FU CTIO

This function is designed to automatically pulse to prepare crushed ice.

■To crush ice, add 6 to 8 large ice cubes (1/3L or 3 cups max) into the

jar and lock on the lid.

■There is no need to add water.

■Press the Ice Crush button to start. For finely crushed ice, use less ice

cubes (maximum 6-8 large ice cubes). When the ice is ready, stop the

blender by pressing OFF.

■Always stop blending and unplug the appliance before removing the

blender lid. Never remove the blender jar from the base until the blades

have come to a complete stop.

IMPORTANT GUIDELINES

■Always ensure that the blender lid and stopper are locked in place be-

fore blending. For your safety, the blender will not start unless the blen-

der jar is correctly assembled and positioned on the metal base.

■Always stop blending and unplug the appliance before removing the

blender lid. Never remove the blender jar from the base until the blades

have come to a complete stop.

■When blending solid ingredients, cut them into smaller pieces (1/2 –

1” long) before adding to the blender jar. When blending a mixture of

liquid and solid ingredients, always pour the liquid ingredients into the

blender jar first, then add the solid ingredients.

■When blending hot foods, always ensure that the lid stopper is loose-

ned to allow steam to escape. Always double-check that the lid is cor-

rectly locked in place before processing to prevent injury, and allow boi-

ling hot liquids to cool before blending.

English

■To add ingredients while blending, carefully re ove the lid stopper fro

the center of the lid and add ingredients through the opening. Replace

the lid stopper once ingredients have been added.

■If you wish to scrape down the slides of the jar, press OFF and unplug

the appliance before re oving the blender jar fro the base. Never

reach into the blender jar with the jar still on the base.

Unlock the lid and use a plastic spatula to scrape down the sides. The

blades at the botto of the blender jar are very sharp, take care when

scraping the jar to not da age your tools.

■Never put hands or fingers into the glass jar or close to the blade.

■Always start blending on the lowest speed then increase to the

desired speed.

■Re ove the blender jar fro the etal base only when it has co e to

a standstill.

■Cord storage: The power cord can be shortened by feeding back into

the etal base through the opening in the rear (diagram 4).

CLEANING

■Always turn the blender off and unplug, then re ove the blender jar

fro the base before cleaning.

■Wipe the etal base with a da p cloth and dry before using.

■Never i erse the base in water or place under running water.

■Do not clean base with harsh or abrasive che ical cleaners or sponges.

■The blender jar and lid can be washed in the dishwasher. The

blender lid should be washed on the top rack only to prevent

defor ation.

■When washing by hand, use war water and a gentle dishwashing

liquid.

■Always re ove the blade asse bly fro the botto of the blender jar

before washing.

■To clean the blade asse bly, e pty the jar and hold upside down, with

the locking ring base on top, then release the locking ring base, and

carefully re ove the blade asse bly and seal fro the locking ring

base.

English

CAUTIO : USE EXTREME CAUTIO WHE

HA DLI G BLADE ASSEMBLY. BLADES ARE

EXTREMELY SHARP!!

■Wash the locking ring base, blade assembly, and seal carefully by hand

with warm water and gentle dishwashing liquid, then dry before

re-assembling to the blender jar.

TROUBLESHOOTING

Problem: Cause: Solution:

Blender does not

work.

Blender is unplugged Plug in the blender

The blender jar is not

properly assembled or

positioned on the base

Confirm that the blade

assembly is properly

assembled to the blen-

der jar, and that the jar

is correctly positioned

in the base.

Excessive vibration

The blender is placed

on an uneven surface. Place on a flat surface.

The blender jar is not

properly positioned on

the base.

Confirm that the jar is

correctly assembled

and positioned in the

base.

Blender jar contents

leaking from lid.

Maximum capacity ex-

ceeded

Note maximum levels

as follows

- 60 oz for thick mix-

tures

- 50 oz for very liquid

mixtures

- 6 to 8 ice cubes for

ice crush

Blender lid is not pro-

perly locked in place. Lock the blender lid in

place before blending.

English

Problem: Cause: Solution:

Leaking from bottom

of blender jar

Silicone seal missing

or incorrectly assem-

bled.

Check that the seal is

in place and correctly

positioned.

Seal deformed or da-

maged.

Replace seal. Replace-

ment seals are availa-

ble from RUPS

certified service cen-

ters.

Blades are jammed. Pieces of food are too

big or too hard.

Reduce size of pieces

of food, blend in smal-

ler quantities, or blend

with liquids.

DISPOSING OF YOUR APPLIANCE

iYour appliance contains valuable materials which can be

recycled.

‹Consult your local waste collection center for correct

disposal procedure and recycling options.

Autres manuels pour KB790

Table des matières

Autres manuels Krups Mixer

Krups

Krups KB790 PRE Expert Manuel utilisateur

Krups

Krups GPA3 Manuel utilisateur

Krups

Krups PERFECT MIX 9000 PRO HZ4071 Series Manuel utilisateur

Krups

Krups MINI CHOPPER GVA2 Manuel utilisateur

Krups

Krups PERFECT MIX MiniPro 9000 Series Manuel utilisateur

Krups

Krups KZ700 Manuel utilisateur

Krups

Krups Prep Expert Series 7000 Manuel utilisateur

Krups

Krups Blender Manuel utilisateur

Krups

Krups Freshmix KB710D Manuel utilisateur

Krups

Krups GPA1 Manuel utilisateur

Krups

Krups HZ507110 Manuel utilisateur

Krups

Krups FRESHMIX KB710D12 Manuel utilisateur

Krups

Krups MINI CHOPPER GVA2 Manuel utilisateur

Krups

Krups KB503110 Manuel utilisateur

Krups

Krups PERFECT MIX 9000 PRO+ HZ508110 Manuel utilisateur

Krups

Krups PERFECTMIX COOK Manuel utilisateur

Krups

Krups KB 50 Manuel utilisateur

Krups

Krups FRESHBOOST KB180111 Manuel utilisateur

Krups

Krups KB720 Manuel utilisateur

Krups

Krups Perfect Mix 9000 KB303 Manuel utilisateur

Krups

Krups CRYSTAL LINE KZ700142 Manuel utilisateur

Krups

Krups PERFECT MIX KB87 Manuel utilisateur

Krups

Krups Prep Expert 7900 Manuel utilisateur

Krups

Krups KB790 Manuel utilisateur

Manuels Mixer populaires d'autres marques

ROTOR

ROTOR 1125.201 Manuel utilisateur

Braun

Braun Multiquick 5 Vario series Manuel utilisateur

ARENDO

ARENDO MIRA 305424 Manuel utilisateur

CHEF-BUILT

CHEF-BUILT CCB-3500 Manuel utilisateur

Viconte

Viconte VC-4406 Manuel utilisateur

Oster

Oster BLSTAB-CB0 Manuel utilisateur

HOFFEN

HOFFEN MC-3005 Manuel utilisateur

Black & Decker

Black & Decker BLC18750DM Manuel utilisateur

Sunbeam

Sunbeam 4182 Manuel utilisateur

Bialetti

Bialetti FMX35 Manuel utilisateur

Black & Decker

Black & Decker BL8000 Manuel utilisateur

Duronic

Duronic BL530 Manuel utilisateur

Exquisit

Exquisit MS 3002 wes Manuel utilisateur

Lumme

Lumme LU-KP1891A Manuel utilisateur

Binatone

Binatone HB-735 Manuel utilisateur

Moulinex

Moulinex LM936E10 Manuel utilisateur

Oster

Oster VERSA Manuel d'installation et d'exploitation

Ninja

Ninja NN210Q Manuel utilisateur