Kramer TP-900UHD Manuel utilisateur
USER MANUAL
TP-900UHD
HDMI/HDBaseT Receiver/Switcher/Scaler
MODEL:
KRAMER.RU
2KRAMER ELECTRONICS, LTD.
TP-900UHD QUICK START GUIDE
This guide helps you install and use your product for the first time. For more detailed information, go to
http://www.kramerav.com/manual.
Step 1: Check what’s in the box
Step 2: Get to know your TP-900UHD
TP-900UHD HDMI/HDBaseT Receiver/Switcher/Scaler
1 Power supply (12V DC)
4 Rubber feet
1 Quick Start Guide
Feature Function
1
IN LED Lights green when the HDMI input is selected and blue when HDBT is selected. It ashes if no
input signal
2
HDBT/HDMI Button Press to select remote HDBT or local HDMI source
3 HDMI output status LED Lights green when an HDMI acceptor is connected
4 HDBT LINK status LED Lights green when the HDBT link between transmitter and receiver is successfully established
and is active
5 ON LED Lights green when the unit is powered from local 12V DC source and lights blue when from
remote HDBT
6 MENU Button Press to enter the conguration menu. When the menu is displayed, press to exit one level up.
7 ENTER Button When not in OSD, press ENTER to call input status.
In OSD, press Enter to selects and activates a menu item or to accept a parameter value. Press
and hold together with the “-“ or “+” to accelerate auto increment.
8 “-“ Button When not in OSD, press and hold together with the “+” to set factory default output resolution
1080p.
In OSD, press to move backward through the sub-menu list or to decrement the parameter
value. Press and hold together with the “+“ button to set default value
9 +/FREEZE Button When not in OSD, press to freeze the image. Press and hold together with the “-” to set factory
default output resolution 1080p.
In OSD, press to move forward through the sub-menu list or to increment the parameter val-
ue. Press and hold together with the “-“ button to set factory default value
10 FREEZE LED Lights green when image is frozen
3
Feature Function
11
HDBT IN RJ-45 Connector Connects to an HDBaseT transmitter
12
HDMI IN Connector Connect to HDMI source
13 HDMI OUT Connector Connects to an HDMI acceptor
14 AUDIO BALANCED OUT
Terminal Block Connector
Connect the balanced stereo audio output to a balanced stereo audio acceptor
15 S/PDIF digital audio
output
Connect to digital audio acceptor
16 IR input/output Connect to IR Emitter or Sensor for the remote control of any external device
17 Ethernet RJ-45 Connector Connect via a LAN to a PC for unit control or to any external device to establish pass-through
Ethernet link between this device and another device connected to HDBT transmitter
18 RS-232 Terminal Block
Connector
Connects to a controller or to any external device to establish pass-through serial link be-
tween this device and another device connected to RS-232 port of HDBT transmitter
19 12V DC +12V DC connector for powering the unit
Step 3: Install the TP-900UHD
Attach the rubber feet and place on a table or mount the TP-900UHD in a rack (using an optional RK-T2B rack mount).
Step 4: Connect the inputs and outputs
Always switch o the power on each device before connecting it to your TP-900UHD.
Always use Kramer high-performance cables connecting AV equipment to the TP-900UHD.
Step 5: Connect the power
If the unit does not receive power via PoE, connect the 12V DC power adapter to the TP-900UHD and plug the adapter into the main
electricity.
CONTENTS
4KRAMER ELECTRONICS, LTD.
CONTENTS
1 INTRODUCTION 6
2 GETTING STARTED 7
2.1 Achieving the Best Performance 7
2.2 Safety Instructions 8
2.3 Recycling Kramer Products 8
3 OVERVIEW 9
4 DEFINING THE TP-900UHD 10
5 CONNECTING THE TP-900UHD 12
5.1 Connecting the Ethernet Port Directly to a PC 13
5.2 Remote control of unit via HDBaseT Ethernet Link 15
5.3 Connecting the Ethernet Port via a Network Hub or Switch 16
5.4 RS-232 Control over HDBaseT 16
5.5 IR Control Over HDBaseT 16
6 OPERATING THE TP-900UHD 17
6.1 Operating the TP-900UHD Using the Front Panel Buttons 17
6.2 Using the OSD 17
6.3 The OSD Menu Structure 18
6.4 Operating the TP-900UHD Remotely 21
6.5 The settings that are recommended to optimize CLEAN SWITCH feature 22
6.6 Different Modes of Inputs Switching 22
7 UPGRADING THE FIRMWARE 23
8 TECHNICAL SPECIFICATIONS 24
9 DEFAULT COMMUNICATION PARAMETERS 25
10 KRAMER PROTOCOL 3000 26
10.1 Kramer Protocol 3000 Syntax 26
Host Message Format 26
Simple Command 26
Command String 26
Device Message Format 26
Device Long Response 27
CONTENTS
5
Command Terms 27
Entering Commands 28
Command Forms 28
Chaining Commands 28
Maximum String Length 28
10.2 Kramer Protocol 3000 Commands 29
Common Commands 29
Device Speci c Commands 29
FIGURES
Figure 1: TP-900UHD HDMI HDBaseT Receiver Switcher Scaler Front Panel 10
Figure 2: TP-900UHD HDMI HDBaseT Receiver Switcher Scaler Rear Panel 11
Figure 3: Connecting the TP-900UHD HDMI/HDBaseT Receiver/Switcher/Scaler 12
Figure 4: Local Area Connection Properties Window 14
Figure 5: Internet Protocol Version 4 Properties Window 14
Figure 6: Internet Protocol Properties Window 15
INTRODUCTION
6KRAMER ELECTRONICS, LTD.
1 INTRODUCTION
Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique,
creative, and a ordable solutions to the vast range of problems that confront video, audio, presentation,
and broadcasting professionals on a daily basis. In recent years, we have redesigned and upgraded most
of our line, making the best even better!
Our 1,000-plus di erent models now appear in 14 groups that are clearly de ned by function:
GROUP 1: Distribution Ampli ers;
GROUP 2: Switchers and Routers;
GROUP 3: Control Systems;
GROUP 4: Format/Standards Converters;
GROUP 5: Range Extenders and Repeaters;
GROUP 6: Specialty AV Products;
GROUP 7: Scan Converters and Scalers;
GROUP 8: Cables and Connectors;
GROUP 9: Room Connectivity;
GROUP 10: Accessories and Rack Adapters;
GROUP 11: Sierra Video Products;
GROUP 12: Digital Signage;
GROUP 13: Audio;
and GROUP 14: Collaboration.
Congratulations on purchasing your Kramer TP-900UHD HDMI/HDBT Receiver/Switcher/Scaler, which is
ideal for:
• Professional broadcasting and production studios
• Home theater, presentation and multimedia applications
• Post production
GETTING STARTED
7
2 GETTING STARTED
We recommend that you:
• Unpack the equipment carefully and save the original box and packaging materials for possible
future shipment
• Review the contents of this user manual
Go to http://www.kramerav.com/downloads to check for up-to-date user manuals,
application programs, and to check if firmware upgrades are available (where appropriate).
2.1 Achieving the Best Performance
To achieve the best performance:
• Use only good quality connection cables (we recommend Kramer high-performance, high-resolu-
tion cables) to avoid interference, deterioration in signal quality due to poor matching, and elevated
noise levels (often associated with low quality cables)
• Do not secure the cables in tight bundles or roll the slack into tight coils
• Avoid interference from neighboring electrical appliances that may adversely in uence signal quality
• Position your TP-900UHD away from moisture, excessive sunlight and dust
This equipment is to be used only inside a building. It may only be connected to other equip-
ment that is installed inside a building.
GETTING STARTED
8KRAMER ELECTRONICS, LTD.
2.2 Safety Instructions
Caution: There are no operator serviceable parts inside the unit.
Warning: Use only the power cord that is supplied with the unit.
Warning: Do not open the unit. High voltages can cause electrical shock! Servicing
by quali ed personnel only.
Warning: Disconnect the power and unplug the unit from the wall before installing .
2.3 Recycling Kramer Products
The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC aims to reduce the
amount of WEEE sent for disposal to landfill or incineration by requiring it to be collected and recycled.
To comply with the WEEE Directive, Kramer Electronics has made arrangements with the European
Advanced Recycling Network (EARN) and will cover any costs of treatment, recycling and recovery of
waste Kramer Electronics branded equipment on arrival at the EARN facility. For details of Kramer’s
recycling arrangements in your particular country go to our recycling pages at http://www.kramerav.
com/support/recycling/.
OVERVIEW
9
3 OVERVIEW
The TP-900UHD comprises HDBaseT signal receiver and additional local HDMI input and can perform
CLEAN SWITCH between these two inputs. It is capable to scale the picture to match the resolution
of the monitor and can maintain stable, without intermission output HDMI signal while input signal
changes format or resolution. Besides that, it allows transmitting of RS-232, IR, Ethernet signals via
CAT6.
In particular, the TP-900UHD features:
• Resolution support for up to 4K@60Hz (4:2:0) UHD
• An HDBaseT input
• A local HDMI input
• An HDMI output
• A bidirectional RS-232 port for embedding/de-embedding control commands in the HDBaseT data
stream
• Infrared input and output ports for controlling devices over the HDBaseT data stream
• Audio de-embedding to the balanced stereo line out and to the S/PDIF digital out
• Maintains constant sync or optionally frozen last picture on the output, even when the input video
signal is lost or interrupted
• System range up to 130m (430ft) at normal mode (2K), up to 100m at normal mode (4K); up to 180m
(590ft) extra range mode (1080p @60Hz @24bpp) when using BC-UNIKAT cables
• A built-in ProcAmp for convenient signal adjustment
• An On-Screen Display (OSD) for easy setup and adjustment, accessible via the front-panel buttons
• A non-volatile memory that retains the last settings and can hold up to 16 user-de nable settings.
• A freeze button
The machine is fed from an external 12V DC source or optionally from HDBT POE system, making it suit-
able for eld operation.
You can control the TP-900UHD using the front panel buttons, or remotely via:
• A PC connected to the Ethernet port on the device via a LAN using the control software
• A PC connected to the Ethernet port of remote HDBT transmitter using the same control software
DEFINING THE TP-900UHD
10 KRAMER ELECTRONICS, LTD.
4 DEFINING THE TP-900UHD
Figure 1 defines the front panel of the TP-900UHD.
№Feature Function
1IN LED Lights green when the HDMI input is selected and blue when HDBT input is select-
ed. It ashes if input signal is lost
2 HDBT/HDMI Button Press to select remote HDBT or local HDMI source
3HDMI output status LED Lights green when an HDMI acceptor is connected
4HDBT LINK status LED Lights green when the HDBT link between transmitter and receiver is successfully
established and is active
5ON LED Lights green when the unit is powered from local external 12V DC source and
lights blue when from remote HDBT POE system
6MENU Button Press to enter the con guration menu. When the menu is displayed, press to exit
one level
7ENTER Button When not in OSD, press ENTER to call input signal status menu.
In OSD, press Enter to selects and activates a menu item or to accept a parameter
value. Press and hold together with the “-“ or “+” to scroll rapidly through parameter.
8 “-“ Button When not in OSD, press and hold together with the “+” to set factory default out-
put resolution 1080p.
In OSD, press to move backward through the sub-menu list or to decrement the
parameter value. Press and hold together with the “+“ button to set rapidly param-
eter factory default value
9+/FREEZE Button When not in OSD, press to freeze the image. Press and hold together with the “-”
to set factory default output resolution 1080p.
In OSD, press to move forward through the sub-menu list or to increment the
parameter value. Press and hold together with the “-“ button to set rapidly param-
eter factory default value
10 FREEZE LED Lights green when image is frozen
Figure 1: TP-900UHD HDMI/HDBaseT Receiver/Switcher/Scaler Front Panel
Table des matières
Autres manuels Kramer Changer
Kramer
Kramer VS-2016 Manuel utilisateur
Kramer
Kramer VP-81 Manuel utilisateur
Kramer
Kramer VS-41HDCP Manuel utilisateur
Kramer
Kramer VS-44DT Manuel utilisateur
Kramer
Kramer VS-211UHD Manuel utilisateur
Kramer
Kramer VS-421 Manuel utilisateur
Kramer
Kramer VP-440 Manuel utilisateur
Kramer
Kramer VP-214DS Manuel utilisateur
Kramer
Kramer SWT3-31-HU Manuel utilisateur
Kramer
Kramer FC-321 Manuel utilisateur
Kramer
Kramer VP-771 Manuel utilisateur
Kramer
Kramer VM-114H4C Manuel utilisateur
Kramer
Kramer VS-21A Manuel utilisateur
Kramer
Kramer VS-211UHD Manuel utilisateur
Kramer
Kramer VP-770 Manuel utilisateur
Kramer
Kramer VP-733 Manuel utilisateur
Kramer
Kramer VS-33Vxl Manuel utilisateur
Kramer
Kramer VP-445 Manuel utilisateur
Kramer
Kramer ProScale VP-728 Manuel utilisateur
Kramer
Kramer VP-311DVI Manuel utilisateur
