Kramer FC-46H2 Manuel utilisateur

FC-46H2 Quick Start

P/N:

2900- 300873QS

Rev:

Scan for full manual

FC-46H2 Quick Start Guide

This guide helps you install and use your FC-46H2 for the first time.

Go to www.kramerav.com/downloads/FC-46H2 to download the latest user manual and check if firmware

upgrades are available.

Step 1: Check what’s in the box

FC-46H2 4K HDMI Audio De-Embedder

4 Rubber feet

1 Bracket set

1 Power adapter and cord

1 Quick start guide

Step 2: Get to know your FC-46H2

# Feature Function

PROG Mini USB Port

Connect to a PC to perform firmware upgrades (via K-Upload) and work with the

EDID Designer.

K-Upload and EDID Designer can be downloaded from our Web site at:

www.kramerav.com/downloads/FC-46H2).

To use the mini USB port, you need to download the Kramer USB driver from our

Web site at: www.kramerav.com/support/product_downloads.asp and install it.

SETUP 4-way DIP-switch

Set the device behavior.

All the DIP-switches are set to off (up) by default.

Feature

DIP-switch Settings

EDID Mode

On (down) — EDID locked.

Off (up) — EDID pass-through mode.

When EDID is locked, the audio parameters are set

as defined by DIP-switch 2. In pass-through mode,

the DIP-switch 2 setup is ignored.

2 Audio Support On (down) — Limits the audio to 2-channel LPCM.

Off (up) — Passes the audio parameters.

This setup is enabled only after DIP-switch 1 is set

to On (down; EDID locked).

3/4

Analog Audio

Amplification

Off (up)

On (down)

Off (up)

On (down)

Off (up)

On (down)

Amplification Level

0dB

6dB

12dB

18dB

AUDIO SOURCE

Selector Button

Press to route the audio source from HDMI IN or from HDMI OUT (ARC) to the

audio outputs.

IN LED

Lights green when HDMI IN is selected.

OUT LED

Lights green when HDMI OUT is selected (ARC).

AUDIO OUT

LEDs

DIGITAL

Lights green when a de-embedded audio signal is present on the S/PDIF output.

ANALOG

Lights green when a de-embedded audio signal is present on the ANALOG

audio output.

ON LED

Lights green when powered.

HDMI™ IN Connector

Connect to an HDMI source.

HDMI™ OUT Connector

Connect to an HDMI acceptor.

# Feature Function

8 AUDIO OUT

Connectors

ANALOG 5-pin

Terminal Block

Connect to an analog audio acceptor.

S/PDIF RCA

Connect to a digital audio acceptor.

MUTE 2-pin Terminal Block Connector

Momentarily connect the MUTE pin to GND to mute the analog audio output.

5V DC Power Connector

Connect to the Kramer power adapter.

The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

Step 3: Install FC-46H2

Install FC-46H2 using one of the following methods:

•Attach the rubber feet and place the unit on a flat surface.

•Fasten a bracket (included) on each side of the unit and attach it to a flat surface.

For more information go to www.kramerav.com/downloads/FC-46H2.

•Mount the unit in a rack using the recommended rack adapter

(see www.kramerav.com/product/FC-46H2).

Step 4: Connect the inputs and outputs

Always switch OFF the power on each device before connecting it to your FC-46H2. For best results, we recommend that you

always use Kramer high-performance cables to connect AV equipment to FC-46H2.

Contact Closure Switches:

Mute the analog output by momentarily connecting the MUTE

pin to the GND.

Step 5: Connect the power

Connect the 5V DC power supply to FC-46H2 and plug it into the mains electricity.

Safety Instructions

Caution:

There are no operator serviceable parts inside the unit.

Warning:

Use only the Kramer Electronics power supply that is provided with the unit.

Warning:

Disconnect the power and unplug the unit from the wall before installing.

See www.KramerAV.com for updated safety information.

Autres manuels pour FC-46H2

Table des matières

Autres manuels Kramer Convertisseur de média

Kramer

Kramer TOOLS VP-100 Manuel utilisateur

Kramer

Kramer VM-1610 Manuel utilisateur

Kramer

Kramer DigiTOOLS 7408 Manuel utilisateur

Kramer

Kramer Tools 482xl Manuel utilisateur

Kramer

Kramer FC-70R Manuel utilisateur

Kramer

Kramer VP-505 Manuel utilisateur

Kramer

Kramer VP-409 Manuel utilisateur

Kramer

Kramer KDS-USB2 Kit Manuel utilisateur

Kramer

Kramer VM-100C Manuel utilisateur

Kramer

Kramer 466 Manuel utilisateur

Kramer

Kramer VW-9 Manuel utilisateur

Kramer

Kramer VP-428H2 Manuel utilisateur

Kramer

Kramer FC-4002 Manuel utilisateur

Kramer

Kramer DigiTOOLS 6410N Manuel utilisateur

Kramer

Kramer VCO-1 Manuel utilisateur

Kramer

Kramer VP-434 Manuel utilisateur

Kramer

Kramer VP-435 Manuel utilisateur

Kramer

Kramer VP-721DS Manuel utilisateur

Kramer

Kramer VM-1120 Manuel utilisateur

Kramer

Kramer VM-100CA Manuel utilisateur

Kramer

Kramer VP-715 Manuel utilisateur

Kramer

Kramer PT-1H Manuel utilisateur

Kramer

Kramer FC-69 Manuel utilisateur

Kramer

Kramer VP-413XL Manuel utilisateur

Manuels Convertisseur de média populaires d'autres marques

SoundTraxx

SoundTraxx Blunami BLU-2200 Manuel utilisateur

SPROLINK

SPROLINK VA1 Manuel utilisateur

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manuel utilisateur

Nikon

Nikon AF-S TC-20E III Manuel utilisateur

Axis

Axis AXIS Q7406 Manuel utilisateur

Omega

Omega TAC80B-J Manuel utilisateur

Zoom

Zoom Thunderbolt TAC-2R Manuel utilisateur

OST

OST iConverter 10/100M Manuel utilisateur

Vertiv

Vertiv Netsure Manuel utilisateur

birddog

birddog MINI Manuel utilisateur

Roland

Roland GI-10 Manuel utilisateur

Wallenstein

Wallenstein WX310 Manuel utilisateur

Pace

Pace MSS 200-1 Manuel utilisateur

Solar Converters

Solar Converters EQ 12/24-50 Manuel utilisateur

CYP

CYP EL-7400V Manuel utilisateur

TIE

TIE MIDI 1i1o Manuel utilisateur

DCS

DCS Vivaldi Upsampler Manuel utilisateur

Westermo

Westermo MCW-211 SERIES Manuel utilisateur