Kramer DigiTOOLS 7408 Manuel utilisateur

Kramer Electronics, Ltd.

Preliminary

USER MANUAL

Model:

7408

SDI to Analog Converter

Contents

1Introduction 1

2Getting Started 1

2.1Quick Start 2

3Overview 3

4Your 7408 SDI to Analog Converter 3

5Using Your 7408 SDI to Analog Converter 5

5.1Connecting Your 7408 SDI to Analog Converter 5

5.2Connecting to the 7408 via RS-232 6

5.3Setting the DIP-Switches 7

6Technical Specifications 8

7Communication Protocol (Ver 0.1) 9

Figures

Figure 1: 7408 SDI to Analog Converter 4

Figure 2: Connecting a 7408 SDI to Analog Converter 6

Figure 3: Crossed Cable RS-232 Connection 6

Figure 4: Straight Cable RS-232 Connection with a Null-Modem Adapter 7

Tables

Table 1: 7408 SDI to Analog Converter 4

Table 2: Setting the DIP-switches 7

Table 3: DIP-Switch Settings (AUTO, PAL, and NTSC) 8

Table 4: Technical Specifications of the 7408 SDI to Analog Converter 8

Table 5: Structure of the Protocol 9

Table 6: Instruction Set for the 7408 9

Introduction

1 Introduction

Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been

providing a world of unique, creative, and affordable solutions to the vast

range of problems that confront the video, audio, presentation, and

broadcasting professional on a daily basis. In recent years, we have

redesigned and upgraded most of our line, making the best even better! Our

1,000-plus different models now appear in 11 groups1that are clearly

defined by function.

Thank you for purchasing your Kramer DigiTOOLS 7408 SDI to Analog

Converter, which is ideal for broadcast and production video studios,

postproduction and duplication studios, and non-linear editing. The package

includes the following items:

•7408 SDI to Analog Converter

•Power supply

•Null-modem adapter

•Windows®-based Kramer control software

•This user manual2

2 Getting Started

We recommend that you:

•Unpack the equipment carefully and save the original box and

packaging materials for possible future shipment

•Review the contents of this user manual

•Use Kramer high performance high-resolution cables3

1 GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Matrix Switchers; GROUP 3: Control Systems;

GROUP 4: Format/Standards Converters; GROUP 5: Range Extenders and Repeaters; GROUP 6: Specialty AV Products;

GROUP 7: Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9: Room Connectivity;

GROUP 10: Accessories and Rack Adapters; GROUP 11: Sierra Products

2 Download up-to-date Kramer user manuals from our Web site at http://www.kramerelectronics.com

3 The complete list of Kramer cables is on our Web site at http://www.kramerelectronics.com

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Getting Started

2.1 Quick Start

This quick start chart summarizes the basic setup and operation steps.

Overview

3 Overview

The Kramer DigiTOOLS 7408 SDI to Analog Converter is a high quality,

full 10-bit SDI to Analog video converter in a Kramer Tool housing. The

7408 SDI to Analog Converter is a multi-standard unit, converting 525-line

SDI to NTSC or NTSC4.43, and 625-line SDI to PAL-B/D/G/H/I/N.

The 7408 features:

•Reclocked and equalized SDI output (loop)

•4 times digital over sampling to minimize digital artifacts

•Output configuration to Composite Video and s-Video (Y/C), or

component video (YUV)

•User-friendly Windows PC software, provided for ProcAmp

control via RS-232 for adjusting parameters such as contrast, hue,

saturation and sharpness

•NTSC encoding with or without a 7.5IRE setup

•A perforated cover to prevent overheating

To achieve the best performance:

•Connect only good quality connection cables, thus avoiding

interference, deterioration in signal quality due to poor matching,

and elevated noise levels (often associated with low-quality cables)

•Avoid interference from neighboring electrical appliances that may

adversely influence signal quality and position your Kramer 7408

away from moisture, excessive sunlight and dust

4 Your 7408 SDI to Analog Converter

Figure 1 and Table 1 define the 7408 SDI to Analog Converter:

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Your 7408 SDI to Analog Converter

Figure 1: 7408 SDI to Analog Converter

Table 1: 7408 SDI to Analog Converter

# Feature Function

1 12V DC +12V DC connector for powering the unit

2 V / C BNC connector Connect to: component video or composite video and/or s-Video

acceptors (according to DIP-switch selection −see Table 3)

3 U / Y BNC connector

4 Y / CV

5 SDI OUT BNC Connector Connects to the reclocked and equalized SDI acceptor

6 SDI IN BNC Connector Connects to the SDI source

7 ON LED Illuminates when receiving power

8 RS-232 Port Connects to the PC or the remote controller

9 DIP-switches To setup the unit (see section 5.2)

COMPONENT

AUTO

PAL

NTSC

4xOS

PEDESTAL

VBI

PROGRAM

Using Your 7408 SDI to Analog Converter

5 Using Your 7408 SDI to Analog Converter

You can use your 7408 SDI to Analog Converter to convert SDI video to

professional analog video: composite video and s-Video, or component

video (as the example in Figure 2 illustrates).

5.1 Connecting Your 7408 SDI to Analog Converter

To connect the 7408, do the following1:

1. Connect the SDI source (for example, a digital camera) to the SDI

IN BNC connector. You may also connect the SDI OUT BNC

connector to an SDI acceptor (such as an SDI monitor).

2. Connect the following:

An s-video acceptor (such as an s-video monitor) to the C−Y

output BNC connectors; and/or,

A composite video acceptor, such as a composite video monitor

to the CV output BNC connector; or,

A component video acceptor, such as a VCR, to the YUV BNC

connectors

3. Connect a PC (if required) to the RS-232 port (see section 5.2).

4. Set the DIP-switches, as section 5.2 describes.

5. Connect the 12V DC power adapter to the power socket and

connect the adapter to the mains electricity.

Warning:

Do not cover the 7408

1 Switch OFF the power on each device before connecting it to your 7408. After connecting your 7408, switch on its power

and then switch on the power on each device

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Using Your 7408 SDI to Analog Converter

Figure 2: Connecting a 7408 SDI to Analog Converter

5.2 Connecting to the 7408 via RS-232

You can connect to the unit via a crossed RS-232 connection, using for

example, a PC. A crossed cable or null-modem is required as shown in

method A and B respectively. If a shielded cable is used, connect the shield

to pin 5.

Method A (Figure 3)—Connect the RS-232 9-pin D-sub port on the unit via

a crossed cable (only pin 2 to pin 3, pin 3 to pin 2, and pin 5 to pin 5 need

be connected) to the RS-232 9-pin D-sub port on the PC.

Note: There is no need to connect any other pins.

Figure 3: Crossed Cable RS-232 Connection

Using Your 7408 SDI to Analog Converter

Hardware flow control is not required for this unit. In the rare case where a

controller requires hardware flow control, short pin 1 to 7 and 8, and pin 4

to 6 on the controller side.

Method B (Figure 4)—Connect the RS-232 9-pin D-sub port on the unit via

a straight (flat) cable to the null-modem adapter, and connect the null-

modem adapter to the RS-232 9-pin D-sub port on the PC. The straight

cable usually contains all nine wires for a full connection of the D-sub

connector. Because the null-modem adapter (which already includes the

flow control jumpering described in Method A above) only requires pins 2,

3 and 5 to be connected, you are free to decide whether to connect only

these 3 pins or all 9 pins.

Figure 4: Straight Cable RS-232 Connection with a Null-Modem Adapter

5.3 Setting the DIP-Switches

Configure the 7408 unit by setting the DIP-switches, as Table 2 defines:

Table 2: Setting the DIP-switches

DIPS Function Description

1 PROGRAM ON for upgrading firmware; otherwise OFF

2 VBI ON to enable Vertical Interval Blanking; OFF to disable

3 PEDESTAL1ON for pedestal (7.5 IRE offset selection for NTSC); OFF for no pedestal

4 4XOS2ON to enable oversampling3; OFF to disable oversampling

5 NTSC ON for NTSC 3.58 (see Table 3)

6 PAL ON for PAL (see Table 3)

7 AUTO ON for multi-standard; OFF for user selected (fixed) standard (see Table 3)

8 COMPONENT ON for component video; OFF for composite video and/or s-video

1 NTSC offsets the black level within the active video signal by 7.5 IRE when selected

2 4xOS is 4 x Oversample

3 When this method is used, the noise figure is improved

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Technical Specifications

Table 3: DIP-Switch Settings (AUTO, PAL, and NTSC)

AUTO PAL NTSC 7408 Output Standard

OFF OFF OFF NTSC 4.43

OFF OFF ON NTSC 3.58

OFF ON OFF PAL-B

OFF ON ON PAL-N

ON OFF OFF PAL-N for 625 line SDI input; NTSC 4.43 for 525 line SDI input

ON OFF ON PAL-N for 625 line SDI input; NTSC 3.58 for 525 line SDI input

ON ON OFF PAL-B for 625 line SDI input; NTSC 4.43 for 525 line SDI input

ON ON ON PAL-B for 625 line SDI input; NTSC 3.58 for 525 line SDI input

6 Technical Specifications

Table 4 includes the technical specifications:

Table 4: Technical Specifications1of the 7408 SDI to Analog Converter

INPUT: 1 SDI: SMPTE-259M, ITU-R BT.601 on a BNC connector

OUTPUTS: 1 reclocked SDI: SMPTE-259M, ITU-R BT.601 on a BNC connector;

1 composite video: 1Vpp/75Ωon a BNC connector;

1 s-Video: 1Vpp, 0.3Vpp/75Ωon two BNC connectors;

1 component video (Y, U and V) on three BNC connectors

BANDWIDTH (-3dB): 5.7MHz

DIFF. GAIN: <1%

DIFF. PHASE: <1Deg

K-FACTOR: 0.5%

S/N RATIO: >70dB (flat field)

DIGITAL RESOLUTION: 10 bit

LUMA NON-LINEARITY: 0.9%

CHROMA/LUMA DELAY: <15nsec

POWER SOURCE: 12V DC, 320mA

DIMENSIONS: 12cm x 7.5cm x 2.5cm (4.7" x 2.95" x 0.98") W, D, H

WEIGHT: 0.3kg (0.66lbs)

ACCESSORIES: Power supply, null-modem adapter

OPTIONS: RK-3T 19" rack adapter

1 Specifications are subject to change without notice

Autres manuels pour DigiTOOLS 7408

Table des matières

Autres manuels Kramer Convertisseur de média

Kramer

Kramer FC-4002 Manuel utilisateur

Kramer

Kramer VP-721DS Manuel utilisateur

Kramer

Kramer TOOLS VP-100 Manuel utilisateur

Kramer

Kramer VP-472 Manuel utilisateur

Kramer

Kramer VA-680D Manuel utilisateur

Kramer

Kramer FC-4000 Manuel utilisateur

Kramer

Kramer VM-400HDCP Manuel utilisateur

Kramer

Kramer FC-4046 Manuel utilisateur

Kramer

Kramer VP-791 Manuel utilisateur

Kramer

Kramer KDS-EN5 Manuel utilisateur

Kramer

Kramer 465 Manuel utilisateur

Kramer

Kramer VP-472 Manuel utilisateur

Kramer

Kramer VP-440H2 Manuel utilisateur

Kramer

Kramer VP-439 Manuel utilisateur

Kramer

Kramer VP-426C Manuel utilisateur

Kramer

Kramer VP-551X Manuel utilisateur

Kramer

Kramer VM-50AN Manuel utilisateur

Kramer

Kramer VM-2Hxl Manuel utilisateur

Kramer

Kramer FC-16 Manuel utilisateur

Kramer

Kramer VP-558 Manuel utilisateur

Kramer

Kramer VA-1DVI Manuel utilisateur

Kramer

Kramer VM-2HxI Manuel utilisateur

Kramer

Kramer VP-436N Manuel utilisateur

Kramer

Kramer VS-21DT Manuel utilisateur

Manuels Convertisseur de média populaires d'autres marques

SoundTraxx

SoundTraxx Blunami BLU-2200 Manuel utilisateur

SPROLINK

SPROLINK VA1 Manuel utilisateur

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manuel utilisateur

Nikon

Nikon AF-S TC-20E III Manuel utilisateur

Axis

Axis AXIS Q7406 Manuel utilisateur

Omega

Omega TAC80B-J Manuel utilisateur

Zoom

Zoom Thunderbolt TAC-2R Manuel utilisateur

OST

OST iConverter 10/100M Manuel utilisateur

Vertiv

Vertiv Netsure Manuel utilisateur

birddog

birddog MINI Manuel utilisateur

Roland

Roland GI-10 Manuel utilisateur

Wallenstein

Wallenstein WX310 Manuel utilisateur

Pace

Pace MSS 200-1 Manuel utilisateur

Solar Converters

Solar Converters EQ 12/24-50 Manuel utilisateur

CYP

CYP EL-7400V Manuel utilisateur

TIE

TIE MIDI 1i1o Manuel utilisateur

DCS

DCS Vivaldi Upsampler Manuel utilisateur

Westermo

Westermo MCW-211 SERIES Manuel utilisateur