Kramer VM-1610 Manuel utilisateur

VM-1610 Quick Start

P/N:

2900- 301268QS

Rev:

Scan for full manual

VM-1610 Quick Start Guide

This guide helps you install and use your VM-1610 for the first time.

Go to www.kramerav.com/downloads/VM-1610 to download the latest user manualand check if firmware

upgrades are available.

Step 1: Check what’s in the box

VM-1610 Balanced Audio-Stereo Distributor

4 Rubber feet

1 Power cord

1 Quick start guide

Step 2: Get to know your VM-1610

Feature

Function

POWER Switch

Illuminated power switch to turn the unit on and off.

CH 2 LEVEL (LEFT, RIGHT) Trimmers

Turn to adjust the left and right audio gains of channel 2.

MODE (1:10, 2x1:5) Button

Press to select 2x1:5 output, release to select 1:10 output.

CH 1 LEVEL (LEFT, RIGHT) Trimmers

Turn to adjust the left and right audio gains of channel 1.

CHANNEL 1 OUT Terminal Blocks

Connect to the channel 1 balanced stereo acceptors (1 to 5).

CHANNEL 1 INPUT Terminal Block

Connect to balanced stereo source 1.

CHANNEL 2 INPUT Terminal Block

Connect to balanced stereo source 2.

CHANNEL 2 OUT Terminal Blocks

Connect to the channel 1 balanced stereo acceptors (6 to 10) or connect to the

channel 2 balanced stereo acceptors (1 to 5).

Power Connector with Fuse

AC connector enabling power supply to the unit.

Step 3: Mount VM-1610

To rack mount the machine, attach both rack ears

(by removing the screws from each side of the

machine and replacing those screws through the

rack ears) or place the machine on a table.

•Ensure that the environment (e.g., maximum ambient temperature &

air flow) is compatible for the device.

•Avoid uneven mechanical loading.

•Appropriate consideration of equipment nameplate ratings should be

used for avoiding overloading of the circuits.

•Reliable earthing of rack-mounted equipment should be maintained.

Step 4: Connect inputs and outputs

Always switch OFF the power on each device before connecting it to your VM-1610.

To achieve specified extension distances, use the recommended Kramer cables available at www.kramerav.com/product/VM-1610.

Using third-party cables may cause damage!

Step 5: Connect power

Connect the power cord to VM-1610 and plug it into the mains electricity.

Safety Instructions (See www.kramerav.com for updated safety information)

Caution:

•For products with relay terminals and GPI\O ports, please refer to the permitted rating for an external connection, located next to the

terminal or in the User Manual.

•There are no operator serviceable parts inside the unit.

Warning:

•Use only the power cord that is supplied with the unit.

•Disconnect the power and unplug the unit from the wall before installing.

•Do not open the unit. High voltages can cause electrical shock! Servicing by qualified personnel only.

•To ensure continuous risk protection, replace fuses only according to the rating specified on the product label which located on the

bottom of the unit.

Step 6: Operate VM-1610

1. Set the MODE (1:10, 2x1:5) button to the required connection mode.

2. If required, adjust the level trimmers with a small screwdriver.

Autres manuels pour VM-1610

Table des matières

Autres manuels Kramer Convertisseur de média

Kramer

Kramer VA-1DVI Manuel utilisateur

Kramer

Kramer VP-25xl Manuel utilisateur

Kramer

Kramer VP-6AHD Manuel utilisateur

Kramer

Kramer FC-46 Manuel utilisateur

Kramer

Kramer DigiTOOLS 7508 Manuel utilisateur

Kramer

Kramer VP-715 Manuel utilisateur

Kramer

Kramer TOOLS VP-100 Manuel utilisateur

Kramer

Kramer OC-1N Manuel utilisateur

Kramer

Kramer VP-439 Manuel utilisateur

Kramer

Kramer FC-17 Manuel utilisateur

Kramer

Kramer VM-1110xl Manuel utilisateur

Kramer

Kramer VM-30CA Manuel utilisateur

Kramer

Kramer FC-7402 Manuel utilisateur

Kramer

Kramer VM-3A Manuel utilisateur

Kramer

Kramer VP-501x1 Manuel utilisateur

Kramer

Kramer KDS-SW3-EN7 Manuel utilisateur

Kramer

Kramer OC-1N Manuel utilisateur

Kramer

Kramer VM-50AN Manuel utilisateur

Kramer

Kramer FC-31xl Manuel utilisateur

Kramer

Kramer VA-40 Manuel utilisateur

Kramer

Kramer VM-50AN Manuel utilisateur

Kramer

Kramer VP-417 Manuel utilisateur

Kramer

Kramer VP-472 Manuel utilisateur

Kramer

Kramer VP-506 Manuel utilisateur

Manuels Convertisseur de média populaires d'autres marques

SoundTraxx

SoundTraxx Blunami BLU-2200 Manuel utilisateur

SPROLINK

SPROLINK VA1 Manuel utilisateur

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manuel utilisateur

Nikon

Nikon AF-S TC-20E III Manuel utilisateur

Axis

Axis AXIS Q7406 Manuel utilisateur

Omega

Omega TAC80B-J Manuel utilisateur

Zoom

Zoom Thunderbolt TAC-2R Manuel utilisateur

OST

OST iConverter 10/100M Manuel utilisateur

Vertiv

Vertiv Netsure Manuel utilisateur

birddog

birddog MINI Manuel utilisateur

Roland

Roland GI-10 Manuel utilisateur

Wallenstein

Wallenstein WX310 Manuel utilisateur

Pace

Pace MSS 200-1 Manuel utilisateur

Solar Converters

Solar Converters EQ 12/24-50 Manuel utilisateur

CYP

CYP EL-7400V Manuel utilisateur

TIE

TIE MIDI 1i1o Manuel utilisateur

DCS

DCS Vivaldi Upsampler Manuel utilisateur

Westermo

Westermo MCW-211 SERIES Manuel utilisateur