Kramer MTX3-16-M Manuel utilisateur

MTX3 Modular Matrix Card Quick Start

P/N:

2900- 301634QS

Rev:

Scan for full manual

MTX3 Modular Matrix Card Installation Quick

Start Guide

This guide helps you install the MTX3 Modular Matrix Card.

Step 1: Check what’s in the box

MTX3 Modular Matrix Card

Step 2: Get to know your Modular Matrix Card

The attached card mounts in one of the slots on the rear of the chassis:

•In MTX3-16-M, matrix cards are installed horizontally, and slots are numbered from top to bottom (1 to 8 and 9 to 16).

•In MTX3-34-M, matrix cards are installed vertically, and slots are numbered from left to right (1 to 34).

Input and output cards may be mounted in any slot.

Step 3: Install a matrix card

To install a matrix card to the MTX3 Modular Matrix Card (as shown in the example below):

1. Power off the machine and all devices connected to it.

2. Using a Phillips screwdriver, loosen the screws at the top and bottom (or sideways) of a blank plate.

3. Remove the blank plate from the slot and store it for possible future use.

4. Remove the new card from its shipping box and anti-ESD bag.

5. Holding the card by the lower handle, align the card with the plastic guide rails (vertical or horizontal).

6. Slide the card into the chassis until the front of the card contacts the connector inside the chassis.

7. Press the card firmly into the slot until the connector

plate is flush with the rear panel of the chassis and the

connector is fully seated.

8. Using a Phillips screwdriver, tighten the retaining

screws at the top and bottom of the card to secure it to

the chassis.

9. Power on the machine and follow the procedure in

the user manual to configure the new card.

10. Power on the peripheral devices.

For optimum range and performance use the recommended

Kramer cables available at www.kramerav.com.

Using third-party cables may cause damage!

Safety Instructions

Caution: There are no operator serviceable parts inside the unit.

Warning: Use only the power cord that is supplied with the unit.

Warning: Do not open the unit. High voltages can cause electrical shock! Servicing by qualified personnel only.

Warning: Disconnect the power and unplug the unit from the wall before installing.

Autres manuels pour MTX3-16-M

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Kramer Commutateur matriciel

Kramer

Kramer 1616HD Manuel utilisateur

Kramer

Kramer VS-48HDCPxl Manuel utilisateur

Kramer

Kramer XL 1208V4S Manuel utilisateur

Kramer

Kramer VS-44DT Manuel utilisateur

Kramer

Kramer Sierra Video 1208V3 Manuel utilisateur

Kramer

Kramer Sierra Video 3216V3 Manuel utilisateur

Kramer

Kramer Sierra Video 3248V5xl Manuel utilisateur

Kramer

Kramer TailorMade Manuel utilisateur

Kramer

Kramer XL 1204V2S Manuel utilisateur

Kramer

Kramer VS-88A Manuel utilisateur

Kramer

Kramer Sierra Video 3216V5S Manuel utilisateur

Kramer

Kramer XL 1608V4 Manuel utilisateur

Kramer

Kramer VS-1616V Manuel utilisateur

Kramer

Kramer VP-8x8A Manuel utilisateur

Kramer

Kramer VP-729 Manuel utilisateur

Kramer

Kramer AFM-20DSP-LE Manuel utilisateur

Kramer

Kramer VP-81SID Manuel utilisateur

Kramer

Kramer VS-88DVI Manuel utilisateur

Kramer

Kramer VS-66H3 Manuel utilisateur

Kramer

Kramer MTX3-16-M Manuel utilisateur

Kramer

Kramer VS-42HDCP Manuel utilisateur

Kramer

Kramer Sierra Video 3216V3S Manuel utilisateur

Kramer

Kramer VP-725DS Manuel utilisateur

Kramer

Kramer Sierra Pro XL 1208V5 Manuel utilisateur

Manuels Commutateur matriciel populaires d'autres marques

Broadcast Tools

Broadcast Tools SS 8.2 Manuel utilisateur

Altimium

Altimium MATF32 Manuel utilisateur

ALFAtron

ALFAtron ALF-MUK44N Manuel utilisateur

Monoprice

Monoprice Blackbird 15377 Manuel utilisateur

PTN

PTN FMX12 Manuel utilisateur

CYP

CYP nT15GX01 Manuel utilisateur

TESmart

TESmart HMA0402A40 Manuel utilisateur

Octava

Octava HD4XSTPMX Manuel utilisateur

Intelix

Intelix FLX-88 Mode d'emploi

Roland

Roland XS-1HD Manuel utilisateur

Atlona

Atlona AT-HDMI-22M Manuel utilisateur

Link

Link HD8X8 Manuel utilisateur

AMX

AMX AVS-OP-2020-117 Instructions et recettes

Lindy

Lindy 38042 Manuel utilisateur

Extron electronics

Extron electronics MTPX Plus Series Manuel utilisateur

Key Digital

Key Digital Champion KD-16x16CS Manuel utilisateur

Shinybow USA

Shinybow USA SB-8811 Manuel utilisateur

Optimus

Optimus Compact Manuel utilisateur